Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 OCP3 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 OCP3 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 8002053D | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 OCP3 Adapter | 8002053D | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Online HDD/SSD Flash Component for VMware ESXi - MB006000GWKGR Drive
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Online HDD/SSD Flash Component for VMware ESXi - MB006000GWKGR Drive
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 80020540 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 80020540 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPK0
Previous Version of Firmware:
HPK0
]]>
Last Recommended or Critical Version:
HPK0
Previous Version of Firmware:
HPK0
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
VIB Package can be removed using the command
VIB Package can be removed using the command
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
# ifup ethX or ifconfig ethX up or wicked ifup ethX
If local system doesn't configure any network interface for the adapter that are necessary then to create the network config file to bring up interface.
Additional Information:
Additional Information:
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| BCM 5719 1GbE 4p BASE-T Adptr |
1.60 |
21.6.4 | 1.5.61 | 21.6.90 |
| BCM 5719 1GbE 4p BASE-T OCP3 Adptr | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
| BCM 5719 1GbE 4p BASE-T LOM Adptr | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
| BCM 5720 1GbE 2p BASE-T LOM Adptr | 1.43 | 21.6.4 | 1.5.61 | 21.6.90 |
| NIC | Boot Code Version | PXE Version | NCSI Version | UEFI Version |
| BCM 5719 1GbE 4p BASE-T Adptr |
1.60 |
21.6.4 | 1.5.61 | 21.6.90 |
| BCM 5719 1GbE 4p BASE-T OCP3 Adptr | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
| BCM 5719 1GbE 4p BASE-T LOM Adptr | 1.60 | 21.6.4 | 1.5.61 | 21.6.90 |
| BCM 5720 1GbE 2p BASE-T LOM Adptr | 1.43 | 21.6.4 | 1.5.61 | 21.6.90 |
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
GPK5
Previous Version of Firmware:
GPK5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
GPK5
Previous Version of Firmware:
GPK5
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
GPK5
Previous Version of Firmware:
GPK5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
GPK5
Previous Version of Firmware:
GPK5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
# rpm -Uvh --oldpackage --replacefiles --replacepkgs lsi-megaraid_sas-kmp-default-X.X.X.X-X.sles15spX.x86_64.rpm (X.X.X.X-X represents the version number and spX represents the OS update)
If Installation attempted is failed with “Failed Dependency” Error below Arguments are used to re-try the Installation.
# rpm -Uvh --oldpackage --reinstall lsi-megaraid_sas-kmp-default-X.X.X.X-X.sles15spX.x86_64.rpm (X.X.X.X-X represents the version number and spX represents the OS update)
A REBOOT is required for your computer when the setup is complete.
]]># rpm -Uvh --oldpackage --replacefiles --replacepkgs lsi-megaraid_sas-kmp-default-X.X.X.X-X.sles15spX.x86_64.rpm (X.X.X.X-X represents the version number and spX represents the OS update)
If Installation attempted is failed with “Failed Dependency” Error below Arguments are used to re-try the Installation.
# rpm -Uvh --oldpackage --reinstall lsi-megaraid_sas-kmp-default-X.X.X.X-X.sles15spX.x86_64.rpm (X.X.X.X-X represents the version number and spX represents the OS update)
A REBOOT is required for your computer when the setup is complete.
]]>1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE | 80020682 | 1.3805.0 | 4.80 |
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE | 80020682 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK Adapter for HPE | 80020682 | 1.3805.0 | 4.80 |
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 MCLK NG Adapter for HPE | 80020682 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Gen11 servers with Power-PIC solution (HPE Proliant DL145 and DL20).
]]>Gen11 servers with Power-PIC solution (HPE Proliant DL145 and DL20).
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware without installing the rpm:
Additional Information:
Driver dependency:
This product will scan all Intel NIC devices present in your system. If there are multiple Intel E810/X710/I350/X550 network adapters present in your system, the corresponding inbox NIC drivers may not work well with the firmware library in this product for some kernels. If you encounter errors with this product, it is required to install the Intel OOB NIC drivers (igb/ixgbe/i40e/ice) for all the Intel NIC devices on your system, regardless of which Intel device you are trying to upgrade the firmware for.
]]>
Updating firmware without installing the rpm:
Additional Information:
Driver dependency:
This product will scan all Intel NIC devices present in your system. If there are multiple Intel E810/X710/I350/X550 network adapters present in your system, the corresponding inbox NIC drivers may not work well with the firmware library in this product for some kernels. If you encounter errors with this product, it is required to install the Intel OOB NIC drivers (igb/ixgbe/i40e/ice) for all the Intel NIC devices on your system, regardless of which Intel device you are trying to upgrade the firmware for.
]]>| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version | FW Version |
|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2 Adapter | 8000FB4C | 1.3815.0 | N/A | 9.54 |
| HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter | 8000FB53 | 1.3815.0 | N/A | 9.54 |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter | 8000123F | 1.3815.0 | N/A | N/A |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter | 80001234 | 1.3815.0 | N/A | N/A |
| Intel(R) I350 Gigabit Network Connection (2-port) | 8000119C | 1.3815.0 | N/A | N/A |
| Intel(R) I350 Gigabit Network Connection (4-port) | 8000119D | 1.3815.0 | N/A | N/A |
The combo image v1.3815.0 includes: Boot Agent: 1GbE - v1.5.90, 10GbE - v2.4.59, 40GbE - v1.1.45 & UEFI Drivers: 1GbE - v9.8.86, 10GbE - v8.2.91, 40GbE - v5.0.20
]]>| NIC | EEPROM/NVM Version | OROM Version | Single NVM Version | FW Version |
|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ OCP3 X710-DA2 Adapter | 8000FB4C | 1.3815.0 | N/A | 9.54 |
| HPE Ethernet 10Gb 2-port SFP+ X710-DA2 Adapter | 8000FB53 | 1.3815.0 | N/A | 9.54 |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T Adapter | 8000123F | 1.3815.0 | N/A | N/A |
| Intel I350-T4 Ethernet 1Gb 4-port BASE-T OCP3 Adapter | 80001234 | 1.3815.0 | N/A | N/A |
| Intel(R) I350 Gigabit Network Connection (2-port) | 8000119C | 1.3815.0 | N/A | N/A |
| Intel(R) I350 Gigabit Network Connection (4-port) | 8000119D | 1.3815.0 | N/A | N/A |
The combo image v1.3815.0 includes: Boot Agent: 1GbE - v1.5.90, 10GbE - v2.4.59, 40GbE - v1.1.45 & UEFI Drivers: 1GbE - v9.8.86, 10GbE - v8.2.91, 40GbE - v5.0.20
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00.a5_k1_k1_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00.a5_k1_k1_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 100Gb 2-port NVMe-oF Offload Adapter for HPE | 22.45.1020 | HPE0000000062 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 100Gb 2-port NVMe-oF Offload Adapter for HPE | 22.45.1020 | HPE0000000062 |
]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
VIB Package can be removed using the command
VIB Package can be removed using the command
Existing command output/VIB behavior changes:
==============================================
1. System reboot is required for changes to take effect post VIB installation. This is because of the esxcli plugin support. StorCLI namespace needs to be registered with esxcli and hence a system reboot is the mandatory step per VMware for changes to take effect.
2. If StorCLI utility is directly executed, Command output will be in XML format with XML encoded special characters in place.
Files access / permissions:
============================
1. By default, CLI log file or any files, which are generated by plugin, will be created under /var/log/vmware/ directory.
2. An absolute file path needs to be provided for any plugins which take file as an input.
Limitations:
=============
1. Memory and temp file reservation for storcli is restricted to 100MB in ESXi8.0. Hence if this memory / temp file reservation is exhausted, Plugin will not be able to parse the data correctly. Hence please make sure that the mentioned amount of memory is reserved.
2. Direct StorCLI utility command execution will yield a XML formatted output which aligns to XML rule set.
3. Command options / command / namespaces in ESXCLI plugin are case sensitive. Hence plugin should be executed based on the help mentioned for each of the esxcli plugin else esxcli plugin will error out.
4. ESXCLI plugin has a command output data limit. If this exceeds, Plugin will not parse and display the information. If the command output length is more, Please use the file option to store the data instead else please follow the below instructions from VMware to increase the data limit.
Steps to increase the command data limit:
=========================================
1. Run the following command on the host in question: configstorecli config current get -c esx -g services -k hostd > out.json
2. Try bumping the limits in the below in VMOMI adapter and see if it helps when running esxcli.
"vmomi": {
"soap_request": {
"max_elements": 500000,
"max_depth": 1000,
"max_unauthenticated_doc_size": 100000,
"max_doc_size": 20000000
}
},
3. Then in the resulting out.json file find the entries above and bump the limits, e.g. double max_elements, max_depth and max_doc_size.
4. Finally, reapply:
configstorecli config current set -c esx -g services -k hostd -infile out.json
5. Reboot the server.
Additional notes:
=================
1. For system namespace i.e., esxcli storcli system <>, except the esxcli storcli system file <> plugin, Options --json and --nolog are valid.
These options are not displayed in esxcli plugin help because these options are optional and there are no mandatory options for these set of commands.
2. The command options to the plugins are maintained in lower case as they are case sensitive.
3. The command options are presented in alphabetical order of the parameter name. It's per the esxcli plugin convention/rules.
4. Input value needs to be enclosed in double quotes if format of the value has a space.
5. Help command is not added as the esxcli plugin framework offers help based on the available namespaces and corresponding commands/command options can be queried accordingly.
ESXCLI Plugin format:
======================
esxcli [options] {namespace}+ {cmd} [cmd options]
Example : esxcli storcli system show ctrlcount
ESXCLI plugin sample command output:
=====================================
esxcli storcli system show ctrlcount
CLI Version = 007.2417.0000.0000 Apr 21, 2023
Operating system = VMkernel8.0.0
Status Code = 0
Status = Success
Description = None
Controller Count = 1
]]>
Existing command output/VIB behavior changes:
==============================================
1. System reboot is required for changes to take effect post VIB installation. This is because of the esxcli plugin support. StorCLI namespace needs to be registered with esxcli and hence a system reboot is the mandatory step per VMware for changes to take effect.
2. If StorCLI utility is directly executed, Command output will be in XML format with XML encoded special characters in place.
Files access / permissions:
============================
1. By default, CLI log file or any files, which are generated by plugin, will be created under /var/log/vmware/ directory.
2. An absolute file path needs to be provided for any plugins which take file as an input.
Limitations:
=============
1. Memory and temp file reservation for storcli is restricted to 100MB in ESXi8.0. Hence if this memory / temp file reservation is exhausted, Plugin will not be able to parse the data correctly. Hence please make sure that the mentioned amount of memory is reserved.
2. Direct StorCLI utility command execution will yield a XML formatted output which aligns to XML rule set.
3. Command options / command / namespaces in ESXCLI plugin are case sensitive. Hence plugin should be executed based on the help mentioned for each of the esxcli plugin else esxcli plugin will error out.
4. ESXCLI plugin has a command output data limit. If this exceeds, Plugin will not parse and display the information. If the command output length is more, Please use the file option to store the data instead else please follow the below instructions from VMware to increase the data limit.
Steps to increase the command data limit:
=========================================
1. Run the following command on the host in question: configstorecli config current get -c esx -g services -k hostd > out.json
2. Try bumping the limits in the below in VMOMI adapter and see if it helps when running esxcli.
"vmomi": {
"soap_request": {
"max_elements": 500000,
"max_depth": 1000,
"max_unauthenticated_doc_size": 100000,
"max_doc_size": 20000000
}
},
3. Then in the resulting out.json file find the entries above and bump the limits, e.g. double max_elements, max_depth and max_doc_size.
4. Finally, reapply:
configstorecli config current set -c esx -g services -k hostd -infile out.json
5. Reboot the server.
Additional notes:
=================
1. For system namespace i.e., esxcli storcli system <>, except the esxcli storcli system file <> plugin, Options --json and --nolog are valid.
These options are not displayed in esxcli plugin help because these options are optional and there are no mandatory options for these set of commands.
2. The command options to the plugins are maintained in lower case as they are case sensitive.
3. The command options are presented in alphabetical order of the parameter name. It's per the esxcli plugin convention/rules.
4. Input value needs to be enclosed in double quotes if format of the value has a space.
5. Help command is not added as the esxcli plugin framework offers help based on the available namespaces and corresponding commands/command options can be queried accordingly.
ESXCLI Plugin format:
======================
esxcli [options] {namespace}+ {cmd} [cmd options]
Example : esxcli storcli system show ctrlcount
ESXCLI plugin sample command output:
=====================================
esxcli storcli system show ctrlcount
CLI Version = 007.2417.0000.0000 Apr 21, 2023
Operating system = VMkernel8.0.0
Status Code = 0
Status = Success
Description = None
Controller Count = 1
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
NDR200 HCA to Switch:
NDR200 HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
NDR200 HCA to Switch:
NDR200 HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 80020544 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter | 80020544 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported 25 GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported 25 GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>This method works if this component is already installed on the ESXi host and is running in the Auto mode.
Refer Server updates through iLO 5 in SUM User Guide
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Gen11 servers with Power-PIC solution (HPE Proliant DL145 and DL20).
]]>Gen11 servers with Power-PIC solution (HPE Proliant DL145 and DL20).
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Commands can also be executed from outside the SSA CLI console using the syntax: ssacli
Type "ssacli help" or type "help" at the CLI prompt for usage details.
]]>
Commands can also be executed from outside the SSA CLI console using the syntax: ssacli
Type "ssacli help" or type "help" at the CLI prompt for usage details.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80020542 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-2CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80020542 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
NDR HCA to Switch:
NDR HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>
NDR HCA to Switch:
NDR HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150400.22-1.sles15sp4.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA to Switch:
HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
HCA to Switch:
HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
For HPE servers with iLO7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
Microsoft SNMP Service must be enabled, if SMA (System Management Assistant) is enabled.
For HPE servers with iLO7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
Installation methods:
Method-1 : Interactive installation
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
Installer Optionally will ask for iLO Credential to create app account.
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
Method 2 : Silent mode (Non interactive) installation
Install AMS using smart component with following command
cp<xxxx>.exe /silent
During AMS installation in silent mode, SMA is installed but the service is not enabled.
To enable SMA service at a later time, go to the following folder: %ProgramFiles%\OEM\AMS\Service\ (Typically c:\Program Files\OEM\AMS\Service) and execute "EnableSma.bat /f"
Post this command use amscli to provide iLO credential to create application account or login to iLO.
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Open the command prompt and type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Open the command prompt and type the following command:
Note: Please run above amscli commands twice if SMA service is enabled
HPE servers with iLO6 and iLO5:
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>
Installation methods:
Method-1 : Interactive installation
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
Installer Optionally will ask for iLO Credential to create app account.
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
Method 2 : Silent mode (Non interactive) installation
Install AMS using smart component with following command
cp<xxxx>.exe /silent
During AMS installation in silent mode, SMA is installed but the service is not enabled.
To enable SMA service at a later time, go to the following folder: %ProgramFiles%\OEM\AMS\Service\ (Typically c:\Program Files\OEM\AMS\Service) and execute "EnableSma.bat /f"
Post this command use amscli to provide iLO credential to create application account or login to iLO.
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Open the command prompt and type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Open the command prompt and type the following command:
Note: Please run above amscli commands twice if SMA service is enabled
HPE servers with iLO6 and iLO5:
Place the Smart Component in a temporary directory, then double-click it to run.
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the service installation.
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>1. Restart the AMS service (type 'net stop ams' followed by 'net start ams' in a command prompt) ...OR...
2. Create a new DWORD registry value named PollInterval in registry's HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\hpeams\Parameters and set its value to higher than decimal 300. This value will determine how often (in seconds) AMS reads data from WMI.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
To install or upgrade the driver type:
. If Installation attempted is failed with “Failed Dependency” Error below Arguments are used to re-try the Installation.
Setup is now complete. Please REBOOT your computer NOW!!
For SLES15 installations that will be using the Xen Hypervisor, run the following command after installing the driver rpm. This will ensure the updated driver is used for Xen.
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
. If Installation attempted is failed with “Failed Dependency” Error below Arguments are used to re-try the Installation.
Setup is now complete. Please REBOOT your computer NOW!!
For SLES15 installations that will be using the Xen Hypervisor, run the following command after installing the driver rpm. This will ensure the updated driver is used for Xen.
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
Network connectivity may stop during the upgrade process and may need to be restarted after completion.
Additional Information:
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 | 8002053E | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 OCP3 | 8002053E | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
IMPORTANT UPDATE: SSA (GUI) for Linux can now be run without requiring the System Management Homepage. SSA now supports a Local Application Mode for Linux. The System Management Homepage is still supported, but no longer required to run the SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start SSA in a new Firefox browser window. When the browser window is closed, SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
IMPORTANT UPDATE: SSA (GUI) for Linux can now be run without requiring the System Management Homepage. SSA now supports a Local Application Mode for Linux. The System Management Homepage is still supported, but no longer required to run the SSA GUI.
To invoke, enter the following at the command prompt:
ssa -local
The command will start SSA in a new Firefox browser window. When the browser window is closed, SSA will automatically stop. This is only valid for the loopback interface, and not visible to external network connections.
]]>
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
For downgrade operation from 1016.24.x to lower version, the user message in dialog box will be displayed as upgrade/rewrite/downgrade based on the driver file version available in the "%systemroot%\system32\drivers" path. This is an expected behavior as the expected location path is modified to "%systemdrive%\cpqsystem\pnpdrvs" from 1016.24.x version.
There is no impact on the functionality of driver installation.
]]>From that drive and directory, execute the downloaded file.
For downgrade operation from 1016.24.x to lower version, the user message in dialog box will be displayed as upgrade/rewrite/downgrade based on the driver file version available in the "%systemroot%\system32\drivers" path. This is an expected behavior as the expected location path is modified to "%systemdrive%\cpqsystem\pnpdrvs" from 1016.24.x version.
There is no impact on the functionality of driver installation.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 8002053C | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA2 Ethernet 10/25Gb 2-port SFP28 Adapter | 8002053C | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter | 233.0.151.0 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter |
https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 Adapter | 233.0.151.0 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| HPE Ethernet 10Gb 2-port SFP+ BCM57412 OCP3 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 Adapter | |||||
| HPE Ethernet 10Gb 2-port BaseT BCM57416 OCP3 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 Adapter | |||||
| HPE Ethernet 10/25Gb 2-port SFP28 BCM57414 OCP3 Adapter |
https://www.hpe.com/global/swpublishing/MTX-0572f282f8134709b2788a1a31
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
The "HPE ProLiant iLO 6 Channel Interface Driver" must be installed and running before using this flash component - for e930t.
]]>The "HPE ProLiant iLO 6 Channel Interface Driver" must be installed and running before using this flash component - for e930t.
]]>Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup –s –f’ at the command prompt”.
iLO reset is required after firmware update to display the current firmware version in iLO GUI.
Change to the directory you see in the previous step and run hpsetup by typing ‘./hpsetup –s –f’ at the command prompt”.
iLO reset is required after firmware update to display the current firmware version in iLO GUI.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Changes and improvements made in HPK1 are to enhance receiver signals by changing the drive’s internal PHY register values on Gen11 x2 direct attached system.
Known Issues:
None
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
The "iLO 6 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP) - for e930t.
]]>The "iLO 6 Channel Interface Driver” (CHIF) for Windows which is available from Service Pack for ProLiant (SPP) - for e930t.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
iLO reset is required after firmware update to display the current firmware version in iLO GUI.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
iLO reset is required after firmware update to display the current firmware version in iLO GUI.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX562A-ACAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P10112-B21) | 16.35.4506 | MT_0000000241 |
]]>
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX562A-ACAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P10112-B21) | 16.35.4506 | MT_0000000241 |
]]>
A REBOOT is required for your computer when the setup is complete.
]]>A REBOOT is required for your computer when the setup is complete.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | 26.45.1020 | MT_0000000575 |
]]>
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631102AS-ADAT Ethernet 10/25Gb 2-port SFP28 Adapter for HPE (P42044-B21) | 26.45.1020 | MT_0000000575 |
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>The management interface driver must be installed on the server.
Microsoft .Net Framework 2.0 or later is required to launch HPONCFG GUI.
]]>Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.
Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory HewlettPackardEnterprise\HPONCFG\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HPE System Tools > HPE Lights-Out Online Configuration Utility".
]]>Place Component to a directory in a temporary directory on your hard drive. Double-click it to run.
Click on the install button to install the utlility on the server. This does not require a reboot.
The utility will be installed in the program files under the directory HewlettPackardEnterprise\HPONCFG\
A shortcut for the graphical interface of the utility will be provided in "Start Menu > Programs > HPE System Tools > HPE Lights-Out Online Configuration Utility".
]]>The management interface driver and management agents must be installed on the server.
For iLO 5 or later, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
The management interface driver and management agents must be installed on the server.
For iLO 5 or later, openssl v1.0.x or later is required in addition to above packages.
Customers who manually compile and install openssl or intentionally relocate /usr/bin/openssl, need to set PATH environment variable to direct HPONCFG to the right/intended openssl.
If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package with dependency check, type:
To install the package withour dependency check, type:
After installation, the executable for hponcfg utility can be found under the directory /sbin.
]]>If a previous version of the Hponcfg utility has been installed, it must be removed before this package can be installed. To remove the previous version of the package, type the following :
To install the package with dependency check, type:
To install the package withour dependency check, type:
After installation, the executable for hponcfg utility can be found under the directory /sbin.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features for:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features for:
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
]]>
http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>http://www.hpe.com/storage/spock/
The Enablement Kit requires that the target environment have the libHBAAPI package installed from your OS installation media.
]]>This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --force --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
This version of the enablement kit does not provide the additional functionality of rebuilding the ram disk or setting driver parameters as the previous versions had done. Please refer to the “Additional setup” section of the Native Linux Device-Mapper Multipath for HPE StorageWorks Arrays reference guide for instructions on how to perform these functions. The reference guide is available at the following link:
http://www.hpe.com/storage/spock/
Rewrite of same Enablement kit version on SuSE Linux Enterprise Server 15 service pack 4 and SuSE Linux Enterprise Server 15 service pack 5 has to be performed using --force --nodeps option
Example: rpm –Uvh HPE-CNA-FC-hpeqlgc-Enablement-Kit-<version>.noarch.rpm --force --nodeps
For more information please refer the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <filename>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <filename>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <filename>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
Gen11 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>Gen11 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
This component can only be executed on Windows x64.
]]>To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release kmod-igb-5.14.16-1.rhel9u2.x86_64.rpm is unpublished
- The RPM package name was changed from (hp-igb) to (igb). Now we revert this change from (igb) to (hp-igb).
- The new RPM release is deferred to next new OS major release
* kmod-hp-igb and kmod-igb are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-igb-5.14.16-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-igb and then install the updated RPM.
* The previous web release kmod-igb-5.14.16-1.rhel9u2.x86_64.rpm is unpublished
- The RPM package name was changed from (hp-igb) to (igb). Now we revert this change from (igb) to (hp-igb).
- The new RPM release is deferred to next new OS major release
* kmod-hp-igb and kmod-igb are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-igb-5.14.16-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-igb and then install the updated RPM.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Improve random read/write perfomance.
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Improve random read/write perfomance.
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE (P10180-B21) | 22.45.1020 | MT_0000000435 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX623105AS-VDAT Ethernet 200Gb 1-port QSFP56 Adapter for HPE (P10180-B21) | 22.45.1020 | MT_0000000435 |
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 10/25Gb 2-port SFP28 NVMe-oF Crypto Adapter for HPE | 26.45.1020 | HPE0000000062 |
]]>
| Mellanox Ethernet Only Adapters | Firmware Version | PSID |
| NVIDIA Ethernet 10/25Gb 2-port SFP28 NVMe-oF Crypto Adapter for HPE | 26.45.1020 | HPE0000000062 |
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5, iLO6 and iLO 7 service providing SNMP support.
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5, iLO6 and iLO 7 service providing SNMP support.
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm is unpublished (This generic binary RPM is the same with hp-igb-kmp-default version 6.14.16）
- The RPM package name was changed from (hp-igb-kmp-default) to (igb-kmp-default). Now we revert this change from (igb-kmp-default) to (hp-igb-kmp-default).
- The new RPM release is deferred to next new OS major release
* hp-igb-kmp-default and igb-kmp-default are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm, please uninstall the previous RPM by #rpm -e igb-kmp-default and then install the updated RPM.
* The previous web release igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm is unpublished (This generic binary RPM is the same with hp-igb-kmp-default version 6.14.16）
- The RPM package name was changed from (hp-igb-kmp-default) to (igb-kmp-default). Now we revert this change from (igb-kmp-default) to (hp-igb-kmp-default).
- The new RPM release is deferred to next new OS major release
* hp-igb-kmp-default and igb-kmp-default are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install igb-kmp-default-5.14.16_k5.14.21_150500.53-1.sles15sp5.x86_64.rpm, please uninstall the previous RPM by #rpm -e igb-kmp-default and then install the updated RPM.
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) | 22.45.1020 | MT_0000000437 |
]]>
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX623106AS-CDAT Ethernet 100Gb 2-port QSFP56 Adapter for HPE (P25960-B21) | 22.45.1020 | MT_0000000437 |
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA to Switch:
HCA side (QSFP112) transceiver:
Validated and Supported HDR cables:
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>
HCA to Switch:
HCA side (QSFP112) transceiver:
Validated and Supported HDR cables:
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10/25Gb 2-port SFP28 MCX512F-ACHT Adapter(P13188-B21) | 16.35.4506 | MT_0000000416 |
]]>
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| HPE Ethernet 10/25Gb 2-port SFP28 MCX512F-ACHT Adapter(P13188-B21) | 16.35.4506 | MT_0000000416 |
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Added support for RHEL 10.
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Added support for RHEL 10.
Problems Fixed:
Known Issues:
None
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>Extract the rpm file using the command ‘rpm2cpio <filename> | cpio –idmv’
Navigate to /usr/lib/x86_64-linux-gnu/firmware-ilo6-1.10-1.1 or /usr/lib/x86_64-linux-gnu/firmware-ilo6-1.20-1.1
Run the ‘hpsetup’ file using the command ./hpsetup or ./hpsetup –f when updating to same version
Extract the rpm file using the command ‘rpm2cpio <filename> | cpio –idmv’
Navigate to /usr/lib/x86_64-linux-gnu/firmware-ilo6-1.10-1.1 or /usr/lib/x86_64-linux-gnu/firmware-ilo6-1.20-1.1
Run the ‘hpsetup’ file using the command ./hpsetup or ./hpsetup –f when updating to same version
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00_k1_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh qlgc-qla2xxx-kmp-default-10.02.11.00_k1_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete, the following message displays:
Setup is now complete. Please REBOOT your computer NOW!!
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e qlgc-qla2xxx-<version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --force or --replacepkgs with --nodeps option
Example: rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --force --nodeps
rpm –Uvh qlgc-qla2xxx-<version>.<OSupdate>.x86_64.rpm --replacepkgs --nodeps
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>
Refer to VMware documentation for information on the esxcli commands
]]>Refer to VMware documentation for information on the esxcli commands
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Additional Information:
Additional Information:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To update the driver using VMware tools:
To update the driver using VMware tools:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD5
Last Recommended or Critical Version:
HPD4
Previous Version of Firmware:
HPD4
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Click the Install button to proceed with the installation.
]]>
Click the Install button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | 26.45.1020 | MT_0000000551 |
]]>
| NVIDIA Ethernet Only Adapters | Firmware Version | PSID |
| Mellanox MCX631432AS-ADAI Ethernet 10/25Gb 2-port SFP28 OCP3 Adapter for HPE (P42041-B21) | 26.45.1020 | MT_0000000551 |
]]>
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
amsd only supported on HPE Gen10/Gen10 Plus and later Server Generations.
amsd provides information to the iLO 5,iLO 6 and iLO 7 service providing SNMP support
For HPE servers with iLO 7:
Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system TPM. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amscli) every time the OS or AMS restarts.
Installation methods:
Method 1: Non interactive installation
Login as the system administrator (root), download the RPM and install_ams.sh to a directory on your hard drive and change to that directory.
As part of the installation process, an application account will be created. If the specified iLO credentials are incorrect or if there are any VNIC-related issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
Method 2: Using rpm command
To install the package, type:
During the installation process, you will be prompted to confirm the creation of an application account. If you choose to create the application account during installation, you must specify the iLO username and password. If the provided iLO credentials are incorrect or if there are any VNIC issues, the application account creation will fail. In such cases, manually create the application account post installation using the amscli command.
If you choose not to create application account during the installation process, you can create application account post installation using amscli command.
To check whether the package is loaded properly, type:
Additional help is available by typing:
Using amscli to create application account:
If the creation of application account fails during installation process, you can use amscli command to create application account post installation. Type the following command:
Using amscli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
HPE servers with iLO 5 and iLO 6:
Login as the system administrator (root), download the RPM to a directory on your hard drive and change to that directory.
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPK6
Previous Version of Firmware:
HPK6
Enhancements/New Features:
None
Problems Fixed:
Regular FW maintenance for fixing MCU,sanitize, DRAM and log page..etc.
Known Issues:
None
Last Recommended or Critical Version:
HPK6
Previous Version of Firmware:
HPK6
Enhancements/New Features:
None
Problems Fixed:
Regular FW maintenance for fixing MCU,sanitize, DRAM and log page..etc.
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Gen11 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>Gen11 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>Update the firmware and software in the usual manner.
Update the firmware and software in the usual manner.
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Known Issues:
None
Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>* The previous web release kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm is unpublished
- The RPM package name was changed from (hp-iavf) to (iavf). Now we revert this change from (iavf) to (hp-iavf).
- The new RPM release is deferred to next new OS major release
* kmod-hp-iavf and kmod-iavf are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-iavf and then install the updated RPM.
* The previous web release kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm is unpublished
- The RPM package name was changed from (hp-iavf) to (iavf). Now we revert this change from (iavf) to (hp-iavf).
- The new RPM release is deferred to next new OS major release
* kmod-hp-iavf and kmod-iavf are different RPM package for OS. They can be together installed in the same time.
To avoid confusion, if you already download and install kmod-iavf-4.9.1-1.rhel9u2.x86_64.rpm, please uninstall the previous RPM by #rpm -e kmod-iavf and then install the updated RPM.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
]]>WARNING! Do not power cycle or restart during the firmware update as this can result in loss of capabilities for this unit. It typically takes several minutes for the firmware to load.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57608 Ethernet 100Gb 2-port QSFP112 Adapter for HPE | 233.0.152.6 | 233.0.151.0 | 233.0.146.0 | 233.0.146.0 | 233.0.151.0 |
]]>
Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Select "Install" to start extracting to a temporary location on the hard drive.
Click the "Install" button to perform the driver installation.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Enhancements/New Features:
None
Problems Fixed:
This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
Known Issues:
None
Last Recommended or Critical Version:
HPG1
Previous Version of Firmware:
HPG1
Enhancements/New Features:
None
Problems Fixed:
This maintenance revision improves data integrity. The risk of not upgrading to this firmware is the increased possibility of data corruption in certain error and timing conditions.
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Problems Fixed:
This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
Known Issues:
None
Problems Fixed:
This version of FW now supports the 15.36TB model and FW fixes of drive time-out/failures.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Gen11 servers with Power-PIC solution (HPE Proliant DL145 and DL20).
]]>Gen11 servers with Power-PIC solution (HPE Proliant DL145 and DL20).
]]>Update the firmware and software in the usual manner.
Update the firmware and software in the usual manner.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
None
Known Issues:
None
Refer to VMware documentation for information on the esxcli commands
]]>Refer to VMware documentation for information on the esxcli commands
]]>Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
Reboot your system for the update to take effect immediately.
Verify the RPM signature using the following steps:
Download the HPE GPG 2048-bit Public Key (hpePublicKey2048_key1.pub), which is available from the HPE SDR web site: https://downloads.linux.hpe.com/keys.html
Import the public key while logged in as root by running the following command:
# rpm --import /path_to_the_key/file_name_of_the_key
example # rpm --import /path_to_the_key/26C2B797.pub
Verify the RPM:
Use the rpm --checksig command to validate and verify the digital signature of the signed file. The output from the command indicates the validity of the signature:
# rpm --checksig filename_of_the_rpm
example result # rpm --checksig <filename>.rpm
<filename>.rpm: digests signatures OK
If your file does not pass verification or you do not have the Hewlett Packard Enterprise Company public key installed, you may see an error:
# rpm --checksig sample_file.rpm
sample_file.rpm: (SHA1) DSA sha1 md5 (GPG) NOT OK (MISSING KEYS: key#s)
In this case then do not install the rpm. This means the file has been modified in some way since being released from Hewlett Packard Enterprise Company.
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>1. Flash from iLO GUI
2. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
3. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
]]>Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure
]]>Ensure that the iLO Virtual NIC(VNIC) feature is enabled. Please refer to the HPE iLO User Guide for VNIC configuration procedure
]]>You can use the vSphere CLI in conjunction with Component packages.
Prerequisites
Before you can update a vSphere 8.0 and 9.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 8.0 and 9.0 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphere CLI 8.0 and 9.0, see the VMware vSphere Command-Line Interface Installation and Reference Guide.
Procedure
Installing Components on a vSphere 8.0 and 9.0 Host Using VMware vSphere LifeCycle Manager (vLCM)
The components can also be installed from VMware vSphere LifeCycle Manager that is included in the 8.0 and 9.0 VMware vCenter Server Appliance. For more information and detailed instructions, see the VMware vSphere LifeCycle Manager Administration Guide.
For HPE servers with iLO 7:
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system's vital files. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amsdCli) every time the OS or AMS restarts.
Using amsdCli to create application account:
After installation, you can use amsdCli command to create application account. Type the following command:
Using amsdCli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
Note that the application account will not be automatically removed when the AMS application is uninstalled. User will have to manually remove it from the vital files and iLO GUI.
To remove application token from the vial files, type the following command:
To remove application account from the iLO, go to the iLO UI, User management/Application account, and remove the AMS application account using the delete icon.
For more information on application account please refer to the documentation.
]]>You can use the vSphere CLI in conjunction with Component packages.
Prerequisites
Before you can update a vSphere 8.0 and 9.0 host from the command line, you must have access to a machine on which you can run the VMware vSphere Command-Line Interface 8.0 and 9.0 (vSphere CLI). You can install the vSphere CLI on your Microsoft Windows or Linux system. For information about importing or installing the vSphere CLI 8.0 and 9.0, see the VMware vSphere Command-Line Interface Installation and Reference Guide.
Procedure
Installing Components on a vSphere 8.0 and 9.0 Host Using VMware vSphere LifeCycle Manager (vLCM)
The components can also be installed from VMware vSphere LifeCycle Manager that is included in the 8.0 and 9.0 VMware vCenter Server Appliance. For more information and detailed instructions, see the VMware vSphere LifeCycle Manager Administration Guide.
For HPE servers with iLO 7:
On HPE Gen12 servers with iLO7, HPE Agentless Management Service(AMS) uses HPE iLO Virtual NIC (VNIC) to communicate with iLO. For communication using VNIC, an application account in iLO needs to be created. As part of AMS installation, the application account can be generated and the same will be stored securely in the system's vital files. This is a one-time configuration.
Alternately application can be used without creating an application account. In this case, iLO credentials must be specified (using amsdCli) every time the OS or AMS restarts.
Using amsdCli to create application account:
After installation, you can use amsdCli command to create application account. Type the following command:
Using amsdCli to specify iLO credentials (no-application account method):
If you choose not to create an application account, you must specify iLO credentials every time the OS or application restarts. Type the following command:
Note that the application account will not be automatically removed when the AMS application is uninstalled. User will have to manually remove it from the vital files and iLO GUI.
To remove application token from the vial files, type the following command:
To remove application account from the iLO, go to the iLO UI, User management/Application account, and remove the AMS application account using the delete icon.
For more information on application account please refer to the documentation.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
GPK7
Previous Version of Firmware:
GPK7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPDC
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
]]>
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE | 233.0.152.6 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE |
https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3
]]>
| NIC | Bootcode Version | NCSI Version | MBA Version | UEFI Version | RoCE Version |
|---|---|---|---|---|---|
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 Adapter for HPE | 233.0.152.6 |
233.0.151.0 |
233.0.146.0 |
233.0.146.0 |
233.0.151.0 |
| Broadcom BCM57504 Ethernet 10/25Gb 4-port SFP28 OCP3 Adapter for HPE |
https://www.hpe.com/global/swpublishing/MTX-99a59d3b36404166b10a37a3b3
]]>
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>ssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
ssaducli -ssdrpt -f ssd-report.zip
More options can be found by "ssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HPE Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of SSADUCLI on a system that has a
64-bit (x64) version of SSADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
ssaducli -f adu-report.zip
To generate a SmartSSD Wear gauge report, enter the following command:
ssaducli -ssdrpt -f ssd-report.zip
More options can be found by "ssaducli -help".
Additional Notes
----------------
Both the diagnostic and SmartSSD wear gauge reports are generated in compressed
(ZIP) format.
The diagnostic report output archive contains the following files:
* ADUReport.txt => Diagnostic report in text format
* ADUReport.xml => Diagnostic report in XML format
* ADUReport.htm => HTML viewer for diagnostic report
* report.checksum => checksum file
* SlotX.txt (SlotX.old) => Controller serial output log
Note: The serial output log file(s) are only available if the "HPE Smart
Array SAS/SATA Event Notification Service" is installed and running.
To view the diagnostic report in a browser, extract the ADUReport.htm. Open
ADUReport.htm in the browser.
The SmartSSD wear gauge report output archive contains the following files:
* SmartSSDWearGaugeReport.txt => SmartSSD wear gauge report in text format
* SmartSSDWearGaugeReport.json => SmartSSD wear gauge report in JSON format
* SmartSSDWearGaugeReport.htm => HTML viewer for the JSON wear gauge report
To view the SmartSSD wear gauge report in a browser, extract the
SmartSSDWearGaugeReport.json, SmartSSDWearGaugeReport.htm files to a
directory (both files must reside in the same directory). Open
SmartSSDWearGaugeReport.htm in the browser.
Known Issues
------------
* When installing the 32-bit version of SSADUCLI on a system that has a
64-bit (x64) version of SSADUCLI installed, please uninstall the 64-bit
version first. Failing to uninstall the 64-bit version will cause the 32-bit
installation to fail.
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Regular Firmware changes included:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Regular Firmware changes included:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
Reboot the server for the firmware update to take effect.
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
Reboot the server for the firmware update to take effect.
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Last Recommended or Critical Version:
GPK5
Previous Version of Firmware:
GPK5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>Last Recommended or Critical Version:
GPK5
Previous Version of Firmware:
GPK5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>The libibverb and rdma-core package must be installed on the target system prior to the installation of the RoCE library. If not already present, the packages can be obtained from the operating system installation media.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Flash from iLO GUI
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.589.21-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.589.21-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Enhancements/New Features:
None
Problems Fixed:
An error was found in the queue full handling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset.
The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented.
The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
An error was found in the queue full handling process that results in the FUA bit not getting properly set, which could lead to the drive self-initiated reset.
The FW fix is to resolve the handling of FUA bit during the queue full handling process has been implemented.
The FW was confirmed to resolve the issue of drives resetting under queue full handling situations.
Known Issues:
None
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>Click the "Install" button to proceed with the installation. The utility will automatically be installed.
]]>On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using SSA.
When clicking on a controller that is currently being configured in a different SSA session, a message will appear which allows you to override the other SSA session or cancel. If you choose to override the other SSA session, any unsaved changes in the other session will be discarded.
To uninstall SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
On the Web-based Management Device Homepage, under "options", "Anonymous Access" should be enabled when using SSA.
When clicking on a controller that is currently being configured in a different SSA session, a message will appear which allows you to override the other SSA session or cancel. If you choose to override the other SSA session, any unsaved changes in the other session will be discarded.
To uninstall SSA, use Add/Remove Programs located in the Control Panel on Windows Systems.
To run SSA in local application mode on Windows, Internet Explorer must be the default browser.
The following are known issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
3. Flash from iLO GUI
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Additional Information:
Additional Information:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
HPG8
Previous Version of Firmware:
HPG8
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>NOTE: Updated utilities and system libraries are required to support the iLO HighSecurity, FIPS, and CNSA security states. The HPONCFG Windows utility does not currently support the CNSA security state.
NOTE: Below Points are applicable only for Intel and AMD
• Updated utilities and system libraries are required to support the iLO High Security, FIPS, and CNSA security states
• The iLO RESTful API is the preferred programmatic interface for Gen10, Gen10+ and Gen11 systems.
• The preferred CLI and scripting tool is the RESTful Interface Tool (iLOREST).
Supported Utilities for RL300
Hewlett Packard Enterprise recommends the following or greater versions of iLO utilities for best performance applicable for RL300:
• RESTful Interface Tool (iLOREST) 4.8.0.0
NOTE: Below Points are applicable only for RL300
For more information about Unsupported feature on HPE ProLiant RL300 Gen 11 servers, see iLO 6 User Guide
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
iLO 6 User Guide and Lights-Out Scripting Guide can also be found by following the links at:
http://www.hpe.com/info/ilo-docs
Select your lights-out product, then support & documents, then manuals.
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
To update the driver using VMware tools:
To update the driver using HPE OneView and the HPE Smart Update Tool:
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA to Switch:
NDR / 400GbE cables:
NDR200 / 200GbE splitter cables:
HCA side (QSFP112) transceiver:
Validated and Supported HDR cables:
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>
HCA to Switch:
NDR / 400GbE cables:
NDR200 / 200GbE splitter cables:
HCA side (QSFP112) transceiver:
Validated and Supported HDR cables:
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG9
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
HPG5
Previous Version of Firmware:
HPG5
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD6
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
HPD7
Previous Version of Firmware:
HPD7
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system if you would like the update to take effect immediately.
Supplemental updates for supported ProLiant servers and options can be done by using Smart Update Manager, which is found on the Service Pack for ProLiant ISO.
Update the firmware and software in the usual manner.
]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Problems Fixed:
- Improvements to our out-of-band message handling to ensure robust device management capabilities
- Changes to improve our PCIe link compatibility as well as device reliability
- This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
Known Issues:
None
Problems Fixed:
- Improvements to our out-of-band message handling to ensure robust device management capabilities
- Changes to improve our PCIe link compatibility as well as device reliability
- This firmware update is recommended as it improves our system interoperability and prevents specific scenarios that could cause the drive to become unresponsive.
Known Issues:
None
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD8
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Regular Firmware changes included:
Known Issues:
None
Release Version and/or Date:
HPG3
Last Recommended or Critical Version:
HPG2
Previous Version of Firmware:
HPG2
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Regular Firmware changes included:
Known Issues:
None
Please read before you start using StorCLI executable.
Privileges:
=========
1. StorCLI should be installed / executed with administrative / root / super user privileges.
2. Installed/Execution location should have Read/Write/Execute permissions.
Ubuntu:
=======
Installation:
1. Debian package can be installed using following command syntax : sudo dpkg -i <.deb package>
2. Installed debian package can be verified using following command syntax : dpkg -l | grep -i storcli
Logging:
========
1. While executing StorCLI, Logging is enabled by default.
2. To Turn-off the logging, Place the storcliconf.ini in the current directory and change the DEBUGLEVEL to 0.
3. To change the log level, Place the storcliconf.ini in the current directory and change the DEBUGLEVEL to any desired log level.
4. In case of application crash, Place the storcliconf.ini in the current directory to capture logs.
Please read before you start using StorCLI executable.
Privileges:
=========
1. StorCLI should be installed / executed with administrative / root / super user privileges.
2. Installed/Execution location should have Read/Write/Execute permissions.
Ubuntu:
=======
Installation:
1. Debian package can be installed using following command syntax : sudo dpkg -i <.deb package>
2. Installed debian package can be verified using following command syntax : dpkg -l | grep -i storcli
Logging:
========
1. While executing StorCLI, Logging is enabled by default.
2. To Turn-off the logging, Place the storcliconf.ini in the current directory and change the DEBUGLEVEL to 0.
3. To change the log level, Place the storcliconf.ini in the current directory and change the DEBUGLEVEL to any desired log level.
4. In case of application crash, Place the storcliconf.ini in the current directory to capture logs.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. To flash this firmware package, use the following iLOrest command. See https://servermanagementportal.ext.hpe.com/docs/redfishclients/ilorest-userguide/ to search and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See https://servermanagementportal.ext.hpe.com/docs/redfishclients/ilorest-userguide/ to search and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
Known Issues:
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
To install or upgrade the driver type:
Setup is now complete. Please REBOOT your computer NOW!!
NOTE: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
Enterprise Support
For support on Smart Array controllers, visit http://www.hpe.com/support
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG1
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
NOTE: If user tries to install the same version of the build again when the build is already installed, the behavior can be erratic. Recommendation would be to un-install and install the build to make any changes to the existing installer.
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
NOTE: If user tries to install the same version of the build again when the build is already installed, the behavior can be erratic. Recommendation would be to un-install and install the build to make any changes to the existing installer.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>Validated and Supported HDR / 200GbE cables:
HDR / 200GbE cables:
2xHDR100 / 2x100GbE splitter cables:
Validated and Supported HDR to NDR Switch interoperability cables:
Validated and Supported EDR Cables:
Validated and Supported 10GbE Cables:
Validated and Supported 25GbE Cables:
Validated and Supported 40GbE Cables:
Validated and Supported 100GbE Cables:
Validated and Supported 200GbE Cables:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh elx-lpfc-kmp-default-14.2.566.9_k5.14.21_150500.37-1.sles15sp5.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
Rewrite of same Driver version has to be performed using --reinstall option
Example: rpm –Uvh elx-lpfc-kmp-default-<version>.<OSupdate>.x86_64.rpm --reinstall
For more information please refer to the Knowledge Base at: https://www.suse.com/support/kb/doc/?id=000019640
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Enhancements/New Features:
None
Problems Fixed:
To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.
Known Issues:
None
Last Recommended or Critical Version:
HPD3
Previous Version of Firmware:
HPD3
Enhancements/New Features:
None
Problems Fixed:
To fix - Frequent insertion of low priority commands during IO execution may lead to drive offline randomly.
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See iLO Restful Interface tool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
None
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
To update firmware from VMware ESXi 7.x operating system on target server:
chmod +x CPxxxxxx.vmexe64
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 7.0/8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
Release Version and/or Date:
HPDB
Last Recommended or Critical Version:
HPDA
Previous Version of Firmware:
HPDA
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
]]>
]]>
Remote Online:
To update the driver using VMware tools:
Remote Online:
To update the driver using VMware tools:
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
HCA to Switch:
HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>
HCA to Switch:
HCA side transceiver:
Note: Only cables with HPE Part Numbers are listed in this section. Refer the Release Notes document bundled with the firmware download for a complete list of supported cables.
]]>
Execute the below commands:
> rpm -Uvh <filename>.rpm
See where the files land
> rpm -qlp <filename>.rpm
Change(cd) to the directory you see in the previous step and run hpsetup by typing ‘./setup’ at the command prompt.
Note: Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To install firmware using Smart Update Manager from Service Pack for Edgeline:
This Smart Component is also available in Service Pack for Edgeline(SPE) and can be installed using SUM
Please refer to SUM user guide for installation instructions and SPE Release Notes for more details.
]]>
Execute the below commands:
> rpm -Uvh <filename>.rpm
See where the files land
> rpm -qlp <filename>.rpm
Change(cd) to the directory you see in the previous step and run hpsetup by typing ‘./setup’ at the command prompt.
Note: Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To install firmware using Smart Update Manager from Service Pack for Edgeline:
This Smart Component is also available in Service Pack for Edgeline(SPE) and can be installed using SUM
Please refer to SUM user guide for installation instructions and SPE Release Notes for more details.
]]>Last Recommended or Critical Version:
GDC7402Q
Previous Version of Firmware:
GDC7402Q
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
None
Known Issues:
None
Last Recommended or Critical Version:
GDC7402Q
Previous Version of Firmware:
GDC7402Q
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
None
Known Issues:
None
http://www.hpe.com/storage/spock/
]]>
http://www.hpe.com/storage/spock/
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh kmod-qla2xxx-<version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-qlgc-qla2xxx-10.02.11.00.a5_k1-1.rhel9u2.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e kmod-qla2xxx-<version>.<OSupdate>.x86_64
Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG2
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Update the firmware and software in the usual manner.
]]>Update the firmware and software in the usual manner.
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number.
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation. The utility will automatically be installed.
When the installation is complete, run command prompt environment and navigate to %programfiles%\MR Storage Administrator\StorCLI\bin folder and execute Storcli64.exe utility
For e.g: Storcli64.exe /c0 show
]]>1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Improve random read/write perfomance.
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
Improve random read/write perfomance.
Known Issues:
None
These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: http://www.hpe.com/info/spp/documentation
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
From that drive and directory, execute the downloaded file.
Click the "Install" button to proceed with the installation.
]]>
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Release Version and/or Date:
HPDA
Last Recommended or Critical Version:
HPD9
Previous Version of Firmware:
HPD9
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPD4
Last Recommended or Critical Version:
HPD2
Previous Version of Firmware:
HPD2
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features :
None
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG6
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>
To install this bundle using VMware tools:
Refer to VMware documentation for information on the esxcli commands
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
Enhancements/New Features:
None
Problems Fixed:
Regular Firmware changes included:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Regular Firmware changes included:
Known Issues:
None
Click the "Install" button to proceed with the installation.]]>
Click the "Install" button to proceed with the installation.]]>
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See http://www.hpe.com/servers/resttool to download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
Known Issues:
None
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Enhancements/New Features:
None
Problems Fixed:
This fix is for unrecovered errors may occur on the targeted Blocks of Wear-leveling process when host issues Read command.
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features :
Problems Fixed:
Known Issues:
None
To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Enhancements/New Features:
Problems Fixed:
None
Known Issues:
None
Gen11 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>Gen11 servers with Power-PIC solution (HPE Proliant DLxx5 and Synergy).
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
]]>
Remote Online:
Refer to the SPP documentation for detailed instructions at: HPE Service Pack for ProLiant (SPP) Home Page
To update firmware from VMware ESXi 8.0/9.0 operating system on target server:
<full path> is the absolute temporary directory path where zip file was unpacked CPxxxxxx.zip
To remove VIB file:
]]>
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
2. Download the RPM to a directory on your hard drive and change to that directory.
3. To install or upgrade the driver, type the following command at the prompt:
# rpm -Uvh elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64.rpm
Example: # rpm -Uvh kmod-elx-lpfc-14.2.566.9-1.rhel9u3.x86_64.rpm
4. When the installation or upgrade is complete without any failure, please reboot the server for changes to take effect.
IMPORTANT: If the installation fails or if you see any warning or error messages, STOP, do NOT reboot the computer. The driver will not be operational and you must uninstall the driver by typing the following command:
# rpm -e elx-lpfc-<kerneltype><version>.<OSupdate>.x86_64
]]>
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO6_IP_Address> -u <iLO6_username> -p <iLO6_password>
This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately.
]]>1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <file name>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <file name>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <file name>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. Place the Component in a temporary directory.
2. From the same directory, run the Component by double-clicking it.
3. When the Component dialog window displays, click the Install button to initiate the firmware upgrade.
4. Reboot your system for the update to take effect immediately.
To verify the HPE SHA256 Authenticode digital signature, do the following steps:
1. Download <file name>.exe to a system running a supported version of Microsoft Windows Server OS. By downloading this file, you are agreeing to the license terms in HPE License Agreement v1.pdf, listed in the 'License' field.
2. Right-click the filename then select Properties
3. When the Properties window displays, click the Digital Signature tab
4. Select the first entry in the Signature List and click the Details button.
5. The signature status will display at the top of the Details dialog.
6. If the signature message states that “This digital signature is OK.”, then the firmware package is authenticated as an HPE package
7. If the message “This digital signature is not OK.” displays, then do the following:
a. Do not deploy the firmware.
b. Download firmware a second time and verify the signature again. If the signature is not OK, then contact HPE Technical Support.
To verify the SHA256 hash value, do the following steps:
1. Use Microsoft Windows CRC/SHA tool to calculate the SHA256 hash value for <file name>.exe.
2. Compare the calculated value with the SHA256 value displayed in the Installation Instruction tab of the HPE Support Center download page.
• If the values match, then the integrity of the downloaded file has been verified.
• If the values do not match, do not deploy the file or its contents.
• Download the file a second time and compare the new hash value.
• If the hash values do not match, then do not deploy the downloaded file and contact HPE Technical Support.
Execute the file <file name>.exe and follow onscreen instructions to finish the installation.
After the driver installaton is complete, please restart the server.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 8001A52F | 1.3346.0 | 4.22 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.1
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-XXVDA4 Ethernet 10/25Gb 4-port SFP28 Adapter | 8001A52F | 1.3346.0 | 4.22 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.1
]]>1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
1. To flash this firmware package, use the following iLOrest command. See https://support.hpe.com to find and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO5_IP_Address> -u <iLO5_username> -p <iLO5_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility (find and download https://support.hpe.com)
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Additional Information:
HPE Intel E810-based network adapters require a system reboot after attempting the firmware update. Updating the firmware more than once without performing a system reboot may result in canceling the previous attempted firmware update.
| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80020543 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>| NIC | EEPROM ID | OROM Version | NVM Version |
|---|---|---|---|
| Intel E810-CQDA2 Ethernet 100Gb 2-port QSFP28 Adapter | 80020543 | 1.3805.0 | 4.80 |
In NIC HII menu(F9->System Utilities->System Configuration->"Select the NIC"->Firmware Image Properties), NVM Version shows 4.8
For more product details, please refer to the latest document in https://www.intel.com/content/www/us/en/content-details/831604/intel-ethernet-controller-products-release-notes.html
]]>To use Smart Update Manager from the Service Pack for ProLiant:
To use Smart Update Manager from the Service Pack for ProLiant:
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG4
Last Recommended or Critical Version:
HPG3
Previous Version of Firmware:
HPG3
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
1. To flash this firmware package, use the following iLOrest command. See https://servermanagementportal.ext.hpe.com/docs/redfishclients/ilorest-userguide/ to search and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
1. To flash this firmware package, use the following iLOrest command. See https://servermanagementportal.ext.hpe.com/docs/redfishclients/ilorest-userguide/ to search and download the latest version of the iLOrest tool.
localhost OS example:
ilorest flashfwpkg <file_name.fwpkg>
remote example:
ilorest flashfwpkg <file_name.fwpkg> --url <iLO_IP_Address> -u <iLO_username> -p <iLO_password>
2. This firmware package can also be installed with the latest version of Smart Update Manager (SUM).
Supplemental updates for supported ProLiant servers and options can be done by using SUM, which is found on the Service Pack for ProLiant (SPP) ISO.
Place the Service Pack for ProLiant on a USB key using the USB Key Creator Utility.
Place the desired firmware packages and components to be updated in the directory "\packages" on the USB key.
Update the firmware and software in the usual manner.
Reboot your system for the update to take effect immediately
3. Flash from iLO GUI
Known Issues:
Known Issues:
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Remote Online:
Refer to the SPP documentation for detailed instructions at: https://support.hpe.com/hpesc/public/docDisplay?docId=a00026884en_us&docLocale=en_US
Additional information to execute VIB file.
Commands required to execute VIB file on ESXi 8.0/9.0
full path is the temporary directory path where zip file was unpacked CPxxxxxx.zip
]]>Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Release Version and/or Date:
HPG7
Last Recommended or Critical Version:
HPG6
Previous Version of Firmware:
HPG6
Firmware Dependency:
None
Enhancements/New Features:
Problems Fixed:
Known Issues:
None
Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Updating firmware by installing the rpm:
Updating firmware without installing the rpm:
Additional Information:
Installing the firmware rpm package (rpm -ivh) does not update the firmware. It merely extracts the rpm content to the local system. Updating the firmware on the local system requires following the above outlined steps.
To use Smart Update Manager from the Service Pack for ProLiant:
Offline:
Online:
Follow the instructions on the screen.
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>Release Version and/or Date:
HPD3
Last Recommended or Critical Version:
None
Previous Version of Firmware:
None
Firmware Dependency:
None
Enhancements/New Features:
None
Problems Fixed:
Known Issues:
None
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>These pre-compiled RPM packages may not install or function as expected on a different kernel (e.g. errata kernel). If you are not using a default inbox kernel, you should download the driver source package (i.e. <driver>.src.rpm) and compile a new driver for your target system from the driver source.
To find the location of the driver source RPM, execute the following command for the kernel module driver RPM: localhost> rpm -qpi <kernel module driver name>.rpm
]]>