CHANGELOG
=========

#### [2.4.0] ####
 * [e5b9422] Updating PO files                                                              (Daniel Henrique Barboza)
 * [503be72] Move System Modules to a sidebar entry                                         (Aline Manera)
 * [ffca4f7] Move Audit features to a sidebar entry                                         (Aline Manera)
 * [33a343c] Ginger sidebar                                                                 (Aline Manera)
 * [b3bb340] Fix expand/collpase widget configuration in Network tab                        (Aline Manera)
 * [aedb1e5] Updated PO files                                                               (Rajat Gupta)
 * [b3510f0] Fix mocking of test_get_list_of_audit_conf                                     (Lucio Correia)
 * [9551e0a] Skip tests that need sudo                                                      (Lucio Correia)
 * [744e29c] Fix and mock test_update for Audit rules                                       (Lucio Correia)
 * [044a8f4] Fix and improve test_get_list_of_pre_rules                                     (Lucio Correia)
 * [16b6a20] Adapt filesystem tests to also run without sudo permission                     (Lucio Correia)
 * [bcbd516] Bug fix #378: Change confirmation dialog of password mismatch in Add User wi.. (Bianca Carvalho)
 * [cb20d1a] Fixing copyright date after previous commits                                   (Daniel Henrique Barboza)
 * [f406292] Externalized active value in audit dispatcher details and list sections.       (Rajat Gupta)
 * [ff80f99] Fixed duplication of user list in user management user list                    (Rajat Gupta)
 * [f61d64d] Introducing Volume group action buttons                                        (Rajat Gupta)
 * [e89a82c] Added validation and fixed error message while adding swap device              (Rajat Gupta)
 * [c29973c] Fixed volume group listing will not refresh after extend/reduce volume         (Rajat Gupta)
 * [34e32f8] Fixed Apply button of audit config can be clicked when no changes was made t.. (Rajat Gupta)
 * [b5afa32] Issue #527.Adding /dev/dasd based swap device yields an error.                 (Megha Smriti)
 * [9560100] Fixing copyright date of UI files                                              (Daniel Henrique Barboza)
 * [68c6ecf] Changes to show translated value of rules types in rules listing and edit ru.. (Rajat Gupta)
 * [bc9b25d] Externalise Network on-off button for ipv4/ipv6 panels and Host Administrati.. (rajat gupta)
 * [7296802] Multi culture UI issues fixed                                                  (Rajat Gupta)
 * [6721ad8] Collapse all Network tab sections                                              (Aline Manera)
 * [f0f20b3] Issue #520. Auto refresh of ovsbridges.                                        (Megha Smriti)
 * [57b0e8f] Update run_server() calls to do not pass model instance                        (Aline Manera)
 * [b203d32] Fixing test_interfaces.py                                                      (Daniel Henrique Barboza)
 * [30e65e7] disable remove button for iscsi devices                                        (Suresh Babu Angadi)
 * [2536442] Fixing copyright of host-network-ovs.js and host-system-services.js            (Daniel Henrique Barboza)
 * [bbddec8] Fixed system service tab missed to list all active services                    (Rajat Gupta)
 * [186a740] Fixed ovs bond interface menu will not exit when save changes and close "Edi.. (Rajat Gupta)
 * [84872f7] Fix for issue #529 and #530                                                    (Suresh Babu Angadi)
 * [10be1fa] Adding self.depends in ginger root                                             (Daniel Henrique Barboza)
 * [f283380] Fixing copyright of ui/js/host-storage-vg.js                                   (Daniel Henrique Barboza)
 * [c2d2bd0] Fixed GINVG00001E and GINVG00009E error received while creating a new volume.. (Rajat Gupta)
 * [1cf1359] Fixed missing apply step when try to extend volume group                       (Rajat Gupta)
 * [ce2b385] Fixed window hangs at the 'loading' step when cancel the physical volume cre.. (Rajat Gupta)
 * [df814a0] Corrected wrong spelling of warning info while creating physical volume.       (Rajat Gupta)
 * [271a4d9] Fixed issue #521 Audit UI: Auditlog filters which doesn't require field valu.. (Rajat Gupta)
 * [c3ee2b0] Fix for refresh button will select all newly added file system automatically.  (Rajat Gupta)
 * [b27aba5] Fixed Audit Logs: unable to open the value input box for 'Event Start' and '.. (Rajat Gupta)
 * [93f4ebb] Fixing copyright date                                                          (Daniel Henrique Barboza)
 * [f43b9ca] Issue #531 Removed refresh of networkdevices on cancellation.                  (Megha Smriti)
 * [6fd2c63] Issue #525. Disabling Set OSA Port option for bond/vlan.                       (Megha Smriti)
 * [e73e078] Bug fix #528                                                                   (Megha Smriti)
 * [0711217] Remove role_key parameter                                                      (Aline Manera)
 * [f015905] Fixing copyright year of UI files after previous commit                        (Daniel Henrique Barboza)
 * [905d098] Bug fix #517: Restore system backup                                            (Bianca Carvalho)
 * [62f1414] Minor issue fixes in create partition                                          (Suresh Babu Angadi)
 * [9b75863] Fixing copyright year of storage_devs.py                                       (Daniel Henrique Barboza)
 * [a3b8cdb] Fix for ginger issue #526                                                      (Megha Smriti)
 * [d6c7a2f] Updating ginger.css with latest changes                                        (Daniel Henrique Barboza)
 * [efa56f9] Remove related functions to VGs Actions                                        (Ramon Medeiros)
 * [dab1560] Bug fix #149: No Option for LVM Logical Volumes                                (Ramon Medeiros)
 * [ad6b775] Fix for confirmation message for delete partition                              (Suresh Babu Angadi)
 * [b7f51b2] Fixing URI of Archives Resource in API.md                                      (Daniel Henrique Barboza)
 * [0c0e894] Bug fix #517: Restore system backup                                            (Bianca Carvalho)
 * [a3def78] Fixing copyright year after the previous commits                               (Daniel Henrique Barboza)
 * [b010d4e] Bug fix #469: Invalid argument when try to bring an interface up               (Ramon Medeiros)
 * [0267c99] Support Bond type for bonding interfaces                                       (Ramon Medeiros)
 * [385db34] Bug fix #390: Ubuntu-16.04: Make Network Configuration able to manage with /.. (Ramon Medeiros)
 * [cc04471] Fix for ginger issue #523                                                      (Megha Smriti)
 * [cb76be8] Fixing copyright year of host-network.js                                       (Daniel Henrique Barboza)
 * [1d39f18] Fix for ginger issue #520                                                      (Megha Smriti)
 * [292a33a] SR-IOV option not being shown                                                  (Daniel Henrique Barboza)
 * [1aba901] Add dependency on libuser to avoid bug                                         (Lucio Correia)
 * [0113c57] Fixed issue #513 wrong error info when creating a user                         (Rajat Gupta)
 * [15b15b3] Fix for ginger issue #518                                                      (Megha Smriti)
 * [ada4fbb] Fix for the ginger issue # 511                                                 (Jayavardhan Katta)
 * [a471a6f] Fix for Issue #512 - Create partition fails with 500 for iSCSI and FCP devices (Pooja Kulkarni)
 * [2252dc5] Fix for ginger issue #509 and #510                                             (Megha Smriti)
 * [b038f17] Fix for Issue #508 - NFS mounting automatically adds _netdev option even whe.. (Pooja Kulkarni)
 * [6fec087] Fix for Issue #499                                                             (Pooja Kulkarni)
 * [d3b8b63] Issue #504 - Removing missing package references from README.md                (Daniel Henrique Barboza)
 * [2a2c074] Bug fix #507: Reduce JS lines to be > 512 characters                           (Aline Manera)
 * [fc899a4] Fix for issue #506                                                             (Suresh Babu Angadi)
 * [6ae5c02] Fix for issue #486 - part 2                                                    (Suresh Babu Angadi)
 * [556484b] Fix for the ginger issue #505                                                  (Jayavardhan Katta)
 * [d688fea] Bug fix #428: wrong parameter in OperationFailed message                       (Daniel Henrique Barboza)
 * [9dad1e1] Use success message for success case                                           (Lucio Correia)
 * [a9db23f] Fix key error while translating error message                                  (Lucio Correia)
 * [8d3cc28] Bug fix #426: adding 'err' parameter in error handling function                (Daniel Henrique Barboza)
 * [52724eb] Bug fix #426: fixing 'join' call in services.py                                (Daniel Henrique Barboza)
 * [7e745ab] Removing the 'Server' UI tab from 'Host' super tab                             (Daniel Henrique Barboza)
 * [4afb0c7] Bug fix #498: Action buttons in Storage and Network tab not aligned properly   (Atreyee Mukhopadhyay)
 * [189d6a3] Globalization implementation for admin systemrule and iSCSI pages              (Rajat Gupta)
 * [6ab9335] Removing commented code from model/cfginterfaces.py                            (Daniel Henrique Barboza)
 * [173c975] Fixed ginger issue #497                                                        (Jayavardhan Katta)
 * [35458fc] Fix for Issue #489 Listing of partitions for a block device or during mount .. (Pooja Kulkarni)
 * [2cfcd9b] Fix for Multi-culture UI issues in Ginger plugin.                              (Nagamani Chennuboina)
 * [22a8cff] Removed console log messages from ginger util                                  (Rajat Gupta)
 * [fe72d6d] Fix for issue #486                                                             (Suresh Babu Angadi)
 * [2ae952a] Issue # 491: Usage icon is not displayed for File System and Swap Devices.     (Atreyee Mukhopadhyay)
 * [1a23ab8] Issue #492: Nfs server Ip field does not validate iPv4 address or hostname.    (Atreyee Mukhopadhyay)
 * [613c8ca] Issue #490 Partitions API should be called with device IDs for FC and iSCSI .. (Pooja Kulkarni)
 * [9872f17] Fix for ginger issue #487                                                      (Megha Smriti)
 * [f39a1b5] Issue #488: OVS Bridge Name allows special characters while creating Ovs bri.. (Atreyee Mukhopadhyay)
 * [05f5b73] Fix for issue #483                                                             (Suresh Babu Angadi)
 * [c50376b] Fix for ginger issue #480 and remove button in User management changed to red. (Megha Smriti)
 * [7d394c9] Fix for ginger issue #478                                                      (Megha Smriti)
 * [aa9e359] Fix for the issue #468                                                         (Jayavardhan Katta)
 * [37d2dbb] Bug fix #482: removing refreshSensors when leaving Admin tab                   (Daniel Henrique Barboza)
 * [c253544] Issue #481 :Audit rules details section in Administration is getting distort.. (Atreyee Mukhopadhyay)
 * [4c439e8] Fix for issue #475                                                             (Suresh Babu Angadi)
 * [c4f784c] Issue #476: Non formatted dasd devices are allowed for create partition.       (Atreyee Mukhopadhyay)
 * [0f7d7dd] Bug fix #473: Refresh on User Mgmt                                             (Prakash Ramasamy)
 * [5d033d0] Fix for issue #474                                                             (Suresh Babu Angadi)
 * [9bd1f63] Bug fix #396: Network Configuration - Add/Delete BOND interface errors         (Bianca Carvalho)
 * [abcc531] Update tests to new service list code                                          (Ramon Medeiros)
 * [deba849] Bug fix #414: service disapear after stopping it at opensuse 42.1              (Ramon Medeiros)
 * [e74295d] Fix for ginger issue #467                                                      (Megha Smriti)
 * [ffa1680] Issue # 472 : System Services Filter does not show messssage "No records fou.. (Atreyee Mukhopadhyay)
 * [39a0564] Fix for ginger issue #471                                                      (Megha Smriti)
 * [a1f202d] Fix for ginger issue #470                                                      (Megha Smriti)
 * [4834098] Fixing typo in GINAUD0031E message of i18n.py                                  (Daniel Henrique Barboza)
 * [21d48fa] Fix for ginger issue #461 #462                                                 (Megha Smriti)
 * [a44c9ea] Fix for issue #466                                                             (Suresh Babu Angadi)
 * [1e756db] Issue #465:UI validaiton missing for Audit rule creation/ modification.        (Atreyee Mukhopadhyay)
 * [5f8876b] Update Ginger code due chnages on Wok configuration parameters                 (Aline Manera)
 * [3ad0c11] Fixed issue #440 filter or messages are not visible while scrolling the serv.. (Rajat Gupta)
 * [cebb044] Issue #457 : Minor UI issues Related to "Audit Logs" section                   (Nagamani Chennuboina)
 * [3c3bcd4] Issue # 463 : UI issues for System Call rule.                                  (Atreyee)
 * [dba174e] Fix for issue #439                                                             (Suresh Babu Angadi)
 * [e145a84] Update po files with latest changes in System Modules                          (Daniel Henrique Barboza)
 * [07f46bb] Updated .po and .pot files                                                     (Pooja Kulkarni)
 * [1edb1f8] Externalize missed strings in Ginger                                           (Pooja Kulkarni)
 * [b8c669d] Update UI to list all modules available to be loaded                           (Ramon Medeiros)
 * [59d496b] Bug fix #406: Ginger should display only unloaded modules to be loaded         (Ramon Medeiros)
 * [ae2a8d5] Bug fix #452: Cannot enable/disable network interfaces                         (Bianca Carvalho)
 * [168c80e] Changing VERSION to 2.3.0                                                      (Daniel Henrique Barboza)
 * [156e1d6] Improve SystemID details in Volume Group                                       (Pooja Kulkarni)
 * [3672d0b] Fixed issue #459 iscsi settings update fails                                   (Rajat Gupta)
 * [a3633c4] Fixed issue #455 Validate IP address and add label for port no in iSCSI disc.. (Rajat Gupta)
 * [7447ed2] Issue # 458 : UI issues related to Volume group.                               (Atreyee Mukhopadhyay)
 * [1bb2ec5] Issue # 454: File system filter not working.                                   (Atreyee Mukhopadhyay)
 * [2cb67f9] Remove URI configuration from ginger.conf file                                 (Aline Manera)
 * [80e9cae] Issue #397 - Fedora 24: Network Configuration - Bring VLAN interface up        (Bianca Carvalho)
 * [93075c0] Wok issue #173: Set tab color on tab-ext.xml and update SCSS files             (Aline Manera)
 * [68ba86a] Wok issue #174: Let Wok create the whole navigation bar                        (Aline Manera)
 * [1346ba3] Issue # 447 : Validation failing for DNS field in Global Network Configurati.. (Atreyee Mukhopadhyay)
 * [1d9132c] Fix for multi-culture Audit UI issues                                          (Nagamani Chennuboina)
 * [ec67435] Introducing OSA port & Buffer count functionalities                            (Nagamani Chennuboina)
 * [6b6e217] Introducing OSA port & Buffer count functionalities                            (Nagamani Chennuboina)
 * [d8c1c95] Removing commented code in ui/js/host-network-vlan.js                          (Daniel Henrique Barboza)
 * [ba07e58] Issue #450 : Seperate the buttons from datatable configuration for Network C.. (Atreyee Mukhopadhyay)
 * [ce22a3d] Issue #448 iSCSI get operation on invalid IQN fails with 500                   (Pooja Kulkarni)
 * [0ed29c9] Improve error message propagation in Filesystems                               (Pooja Kulkarni)
 * [17dcadf] Modified the network code to support OPTIONS in ifcfg file.                    (Megha Smriti)
 * [bb77781] Changed 'volumn' to 'volume' in ui/pages/i18n.json.tmpl                        (Daniel Henrique Barboza)
 * [8b7f3ed] Changed message for delete partition if VG name exist                          (Rajat Gupta)
 * [4b857a1] Fixed Issue #449 Loading icon is always visible while creating partition       (Rajat Gupta)
 * [59b29e7] For FC and Iscsi devices while creating partition pass device ID as paramete.. (Rajat Gupta)
 * [0675a21] Iscsi action login and logout event register onselect event                    (Rajat Gupta)
 * [7e8a821] Fixed issue #446 iSCSI login action button is active for logged in device      (Rajat Gupta)
 * [e9712aa] Fixed Issue #444 : iSCSI Target Authentication config fails to update          (Rajat Gupta)
 * [af3d183] Fix for the size slider in storage devices.                                    (Prakash Ramasamy)
 * [8bd1e88] Check for file path for create swap API                                        (Pooja Kulkarni)
 * [bff791c] Issue #226: Show GiB instead of g for Volume Group sizes                       (Bianca Carvalho)
 * [2c74003] Issue #442 DASD create partition API does not give an error for more than 3 .. (Pooja Kulkarni)
 * [e15b831] test_rules.py: fixing repeated 'key' in dict                                   (Daniel Henrique Barboza)
 * [129ba8d] Fix for multi-culture UI issues                                                (Nagamani Chennuboina)
 * [c2d9ba6] Improving Swap Device Partition listing                                        (Nagamani Chennuboina)
 * [924b726] Issue # 437 :Volume Group list is not getting refreshed post deletion of vol.. (Atreyee Mukhopadhyay)
 * [aaf5535] tests/test_powermanagement.py: changes after model refactoring                 (Daniel Henrique Barboza)
 * [770564f] Powermanagement model refactoring                                              (Daniel Henrique Barboza)
 * [c2680c7] Github #434: Removing tuned.adm service dependency                             (Daniel Henrique Barboza)
 * [9a62259] Returning "rows_indexes" as part of ginger.listNetworkConfig object.           (Atreyee Mukhopadhyay)
 * [10b6cf3] Issue #414: service disapear after stopping it at opensuse 42.1                (Ramon Medeiros)
 * [47a842d] Fixed minor bugs and introduced minor enhancements for Audit rules             (Nagamani Chennuboina)
 * [57deb11] Fixed minor bugs and introduced minor enhancements for Audit rules             (Nagamani Chennuboina)
 * [b1e50c0] Fixed minor bugs and introduced minor enhancements for Audit rules             (Nagamani Chennuboina)
 * [ec29c8a] Change in name of rules and fixed minor issues.                                (Megha Smriti)
 * [0a6c1b3] UI changes for listing FRU devices for Platform Management                     (Yash)
 * [ebbf2b2] Updating po files                                                              (Daniel Henrique Barboza)
 * [30aaaac] Backend changes for listing FRU devices for Platform Management                (Shilpa Sudhakaran)
 * [6088bcf] Fixed URI for "Importing predefined Rules"                                     (Nagamani Chennuboina)
 * [79afabc] Introducing Audit dispatcher functionality.                                    (Atreyee Mukhopadhyay)
 * [0d5bf9a] Introducing Audit dispatcher functionality                                     (Atreyee Mukhopadhyay)
 * [4b02bb4] Introducing Audit Dispatcher functionality.                                    (Atreyee Mukhopadhyay)
 * [7016532] Introducing Audit Dispatcher functionality.                                    (Atreyee Mukhopadhyay)
 * [80e6e5a] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [63bb3a7] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [87be7fc] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [dd4e342] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [cc9c4a8] Added UT for the backend code, API.doc and error messages in i18n.py file      (Jayavardhan Katta)
 * [e7055c1] Backend code implementation for audit dispatcher                               (Jayavardhan Katta)
 * [e7e7a66] Introducing Audit Log functionality.                                           (Atreyee Mukhopadhyay)
 * [e018270] Introducing Audit Log functionality                                            (Atreyee Mukhopadhyay)
 * [97f3651] Introducing Audit Log functionality.                                           (Atreyee Mukhopadhyay)
 * [09155be] Introducing Audit Log functionality.                                           (Atreyee Mukhopadhyay)
 * [7751ca8] UI changes of Update Functionality of Platform Management                      (Yash)
 * [d93506d] Fixing is_feature_available method of model/graph.py                           (Daniel Henrique Barboza)
 * [08bbee2] Issue # 61 :'Add Adapter' button missing in Host -> Network tab.               (Atreyee Mukhopadhyay)
 * [e10dcf9] Issue #412: python-pygraphviz not listed as dependency                         (Ramon Medeiros)
 * [31fe7ed] Fix build process                                                              (Aline Manera)
 * [16af49e] Fix make-rpm target                                                            (Aline Manera)
 * [f5a47c3] Issue #413: spec asks for python2-crypto on opensuse 42.1, which does not ex.. (Ramon Medeiros)
 * [c943211] Issue #433: refactor rpm building                                              (Ramon Medeiros)
 * [f5f371e] Moving Platform Management data to state_dir                                   (Daniel Henrique Barboza)
 * [79224cd] Github #407: hide 'Audit Rules' UI when auditctl isn't found                   (Daniel Henrique Barboza)
 * [98bd241] Issue #403 - Make system services UI more failproof                            (Lucio Correia)
 * [b359903] Makefile.am: CLEANFILES must clean pyc files                                   (Daniel Henrique Barboza)
 * [1bb4036] Issue#408:System Platform does not follow Wok style                            (Manjunath)
 * [1519b22] Issue #381: 'make clean' does not revert its changes from 'make rpm'           (Bianca Carvalho)
 * [0eab874] Fix PEP8 issues                                                                (Lucio Correia)

#### [2.3.1] ####
 * [95f83b6] Updating VERSION and ChangeLog for 2.3.1                                       (Daniel Henrique Barboza)
 * [3a57b60] Updating po files                                                              (Daniel Henrique Barboza)
 * [740a44a] Issue #504 - Removing missing package references from README.md                (Daniel Henrique Barboza)
 * [2ea0f79] Bug fix #428: wrong parameter in OperationFailed message                       (Daniel Henrique Barboza)
 * [b9ce9ed] Use success message for success case                                           (Lucio Correia)
 * [bc0f9b2] Fix key error while translating error message                                  (Lucio Correia)
 * [add470f] Bug fix #426: adding 'err' parameter in error handling function                (Daniel Henrique Barboza)
 * [4a1183e] Bug fix #426: fixing 'join' call in services.py                                (Daniel Henrique Barboza)
 * [1fb4d2b] Removing commented code from model/cfginterfaces.py                            (Daniel Henrique Barboza)
 * [c454e0b] Fixed ginger issue #497                                                        (Jayavardhan Katta)
 * [1ec7f84] Removed console log messages from ginger util                                  (Rajat Gupta)
 * [c8eeaca] Fix for issue #486                                                             (Suresh Babu Angadi)
 * [c667709] Issue # 491: Usage icon is not displayed for File System and Swap Devices.     (Atreyee Mukhopadhyay)
 * [b90b3f3] Issue #492: Nfs server Ip field does not validate iPv4 address or hostname.    (Atreyee Mukhopadhyay)
 * [e908502] Issue #490 Partitions API should be called with device IDs for FC and iSCSI .. (Pooja Kulkarni)
 * [af9ced1] Issue #488: OVS Bridge Name allows special characters while creating Ovs bri.. (Atreyee Mukhopadhyay)
 * [a9e1b2c] Fix for issue #483                                                             (Suresh Babu Angadi)
 * [d757320] Fix for ginger issue #478                                                      (Megha Smriti)
 * [af8f969] Bug fix #482: removing refreshSensors when leaving Admin tab                   (Daniel Henrique Barboza)
 * [b0b2673] Fix for issue #475                                                             (Suresh Babu Angadi)
 * [6be7d98] Issue #476: Non formatted dasd devices are allowed for create partition.       (Atreyee Mukhopadhyay)
 * [b47614b] Issue 473: Refresh on User Mgmt                                                (Prakash Ramasamy)
 * [c0ae47e] Fix for issue #474                                                             (Suresh Babu Angadi)
 * [9f8101d] Bug fix #396: Network Configuration - Add/Delete BOND interface errors         (Bianca Carvalho)
 * [7111cef] Update tests to new service list code                                          (Ramon Medeiros)
 * [c77179f] Bug fix #414: service disapear after stopping it at opensuse 42.1              (Ramon Medeiros)
 * [6129864] Issue # 472 : System Services Filter does not show messssage "No records fou.. (Atreyee Mukhopadhyay)
 * [0f79915] Fix for ginger issue #471                                                      (Megha Smriti)
 * [ca45b90] Fix for ginger issue #470                                                      (Megha Smriti)
 * [9def243] Fix for issue #466                                                             (Suresh Babu Angadi)
 * [fbcaf42] Fixed issue #440 filter or messages are not visible while scrolling the serv.. (Rajat Gupta)
 * [6aa30c8] Fix for issue #439                                                             (Suresh Babu Angadi)
 * [024677a] Update UI to list all modules available to be loaded                           (Ramon Medeiros)
 * [dc48408] Bug fix #406: Ginger should display only unloaded modules to be loaded         (Ramon Medeiros)
 * [06d45c2] Bug fix #452: Cannot enable/disable network interfaces                         (Bianca Carvalho)
 * [8ccb265] Improve SystemID details in Volume Group                                       (Pooja Kulkarni)
 * [8b000ac] Fixed issue #459 iscsi settings update fails                                   (Rajat Gupta)
 * [4aff7b7] Fixed issue #455 Validate IP address and add label for port no in iSCSI disc.. (Rajat Gupta)
 * [2bf21e7] Issue # 458 : UI issues related to Volume group.                               (Atreyee Mukhopadhyay)
 * [13a0cf7] Issue # 454: File system filter not working.                                   (Atreyee Mukhopadhyay)
 * [af1d147] Remove URI configuration from ginger.conf file                                 (Aline Manera)
 * [3704b0a] Wok issue #173: Set tab color on tab-ext.xml and update SCSS files             (Aline Manera)
 * [716c702] Wok issue #174: Let Wok create the whole navigation bar                        (Aline Manera)
 * [af2d3c2] Issue #397 - Fedora 24: Network Configuration - Bring VLAN interface up        (Bianca Carvalho)
 * [24b7a2b] Issue # 447 : Validation failing for DNS field in Global Network Configurati.. (Atreyee Mukhopadhyay)
 * [32ce9ae] Updating ginger.css to latest versions                                         (Daniel Henrique Barboza)
 * [4be459f] Introducing OSA port & Buffer count functionalities                            (Nagamani Chennuboina)
 * [f69be10] Introducing OSA port & Buffer count functionalities                            (Nagamani Chennuboina)
 * [9f7bc91] Removing commented code in ui/js/host-network-vlan.js                          (Daniel Henrique Barboza)
 * [e7cc4ef] Issue #450 : Seperate the buttons from datatable configuration for Network C.. (Atreyee Mukhopadhyay)
 * [519654f] Issue #448 iSCSI get operation on invalid IQN fails with 500                   (Pooja Kulkarni)
 * [c12f009] Improve error message propagation in Filesystems                               (Pooja Kulkarni)
 * [7e016b9] Modified the network code to support OPTIONS in ifcfg file.                    (Megha Smriti)
 * [04e23a6] Changed 'volumn' to 'volume' in ui/pages/i18n.json.tmpl                        (Daniel Henrique Barboza)
 * [6e94012] Changed message for delete partition if VG name exist                          (Rajat Gupta)
 * [b427e5b] Fixed Issue #449 Loading icon is always visible while creating partition       (Rajat Gupta)
 * [a32ba80] For FC and Iscsi devices while creating partition pass device ID as paramete.. (Rajat Gupta)
 * [067577d] Iscsi action login and logout event register onselect event                    (Rajat Gupta)
 * [902abbd] Fixed issue #446 iSCSI login action button is active for logged in device      (Rajat Gupta)
 * [e0d4126] Fixed Issue #444 : iSCSI Target Authentication config fails to update          (Rajat Gupta)
 * [183b777] Fix for the size slider in storage devices.                                    (Prakash Ramasamy)
 * [7239fef] Check for file path for create swap API                                        (Pooja Kulkarni)
 * [5dc0aa2] Issue #226: Show GiB instead of g for Volume Group sizes                       (Bianca Carvalho)
 * [a61f339] Issue #442 DASD create partition API does not give an error for more than 3 .. (Pooja Kulkarni)
 * [21e913e] This patch removes a repeated 'key' key in the dictionary of test_create_fs_.. (Daniel Henrique Barboza)
 * [e2424ca] Improving Swap Device Partition listing                                        (Nagamani Chennuboina)
 * [ea01264] Issue # 437 :Volume Group list is not getting refreshed post deletion of vol.. (Atreyee Mukhopadhyay)
 * [fd8b69a] tests/test_powermanagement.py: changes after model refactoring                 (Daniel Henrique Barboza)
 * [f14c94c] Powermanagement model refactoring                                              (Daniel Henrique Barboza)
 * [042da31] Github #434: Removing tuned.adm service dependency                             (Daniel Henrique Barboza)
 * [243b9bd] Returning "rows_indexes" as part of ginger.listNetworkConfig object.           (Atreyee Mukhopadhyay)
 * [45fa369] Issue #414: service disapear after stopping it at opensuse 42.1                (Ramon Medeiros)
 * [1f8d733] Updating po files                                                              (Daniel Henrique Barboza)

#### [2.3.0] ####
 * [60c1b52] Update changelog for 2.3.0                                                     (Daniel Henrique Barboza)
 * [7c81c39] Changing version to 2.3.0                                                      (Daniel Henrique Barboza)

#### [2.3.0-rc1] ####
 * [6d82ba9] ChangeLog and VERSION changes for 2.3.0-rc1                                    (Daniel Henrique Barboza)
 * [077d301] Fixing is_feature_available method of model/graph.py                           (Daniel Henrique Barboza)
 * [a941998] Issue # 61 :'Add Adapter' button missing in Host -> Network tab.               (Atreyee Mukhopadhyay)
 * [8236532] Issue #412: python-pygraphviz not listed as dependency                         (Ramon Medeiros)
 * [4c1f1f6] Fix build process                                                              (Aline Manera)
 * [814f43f] Fix make-rpm target                                                            (Aline Manera)
 * [16d5d0d] Issue #413: spec asks for python2-crypto on opensuse 42.1, which does not ex.. (Ramon Medeiros)
 * [4ee9a87] Issue #433: refactor rpm building                                              (Ramon Medeiros)
 * [0c2e6bf] Moving Platform Management data to state_dir                                   (Daniel Henrique Barboza)
 * [a775f19] Github #407: hide 'Audit Rules' UI when auditctl isn't found                   (Daniel Henrique Barboza)
 * [d75c2a4] Issue #403 - Make system services UI more failproof                            (Lucio Correia)
 * [f677a6b] Makefile.am: CLEANFILES must clean pyc files                                   (Daniel Henrique Barboza)
 * [db4afb5] Issue #381: 'make clean' does not revert its changes from 'make rpm'           (Bianca Carvalho)
 * [df21e00] Fix PEP8 issues                                                                (Lucio Correia)
 * [e1c3b04] Removing the 'Server' UI tab from 'Host' super tab                             (Daniel Henrique Barboza)
 * [0d89f4d] Issue # 430 :UI displays blank in 'Volume Group' list when checking more det.. (Atreyee Mukhopadhyay)
 * [0eaf985] Fixes on tests/test_graph.py:                                                  (Daniel Henrique Barboza)
 * [b4873ca] Issue #384 : Fixing the broken /ginger/stgdevs API                             (Pooja Kulkarni)
 * [5fc74b6] Issue #418 : Disable iscsi target discovery auth methods for individual IQNs   (Harshal Patil)
 * [e920f13] Issue #415 : Disable auth for iSCSI target and initiator selectively           (Harshal Patil)
 * [fac72e2] Added columns in detailed report for graph creation.                           (Megha Smriti)
 * [3b7eab8] Implemented audit graph backend.                                               (Jayavardhan Katta)
 * [89bf175] Issue #389 : iSCSI Auth model class loading fix                                (Harshal Patil)
 * [b06e89a] Changes for System Platform Management                                         (Manjunath)
 * [5db9f52] Update functionalities for Platform Management                                 (Yash)
 * [828954b] UT implemented for the new features implemented.                               (mesmriti)
 * [c3f2169] Audit graph backend implemetation.                                             (mesmriti)
 * [048ef9c] Audit predefined rules backend implementation.                                 (mesmriti)
 * [23d78a5] Updated docs and i18n.py for the new features implemented.                     (mesmriti)
 * [fc56acf] Backend code implemented to get list of system calls.                          (mesmriti)
 * [b5d336f] Audit report implementation from the backend.                                  (mesmriti)
 * [192c6e9] Audit log implementation from the backend.                                     (mesmriti)
 * [00c40c5] Audit conf implemented in the backend.                                         (mesmriti)
 * [253c8ee] Modified audit rules code for comments and added new features.                 (mesmriti)
 * [165f4d0] Issue #166 : nfs mount fails with 500                                          (Pooja Kulkarni)
 * [e9118a9] Backend Changes for Sensor Data Records for Platform Management                (Shilpa)
 * [c825d7a] Update usage of add_task() method.                                             (Paulo Vital)
 * [0b0c662] Handle exception for create dasd partition                                     (Pooja Kulkarni)
 * [7288959] Enable dasd partition to be used to create a PV                                (Pooja Kulkarni)
 * [ea19737] Issue #300: Redesign Network Configuration                                     (Samuel Guimarães)
 * [349c55b] Initial UI changes for platform management enhancements                        (Manjunath)
 * [ca5a774] Removing console.log calls from ui/js/host-storage-partition.js                (Daniel Henrique Barboza)
 * [112f8a8] Multiple iSCSI UI changes                                                      (Rajat Gupta)
 * [eee0293] Update package dependencies.                                                   (Paulo Vital)
 * [9f372c3] Back-end Changes for System Event Logs for Platform Management                 (Hari G M)
 * [9d22dd0] Multiple UI changes for Storage device partition module                        (Rajat Gupta)
 * [2133e84] Introducing audit functionality.                                               (Atreyee Mukhopadhyay)
 * [ca386fa] Fixing miscellaneous issue in file system and volume group.                    (Atreyee Mukhopadhyay)
 * [0018152] Github #27: remove the clutter from Ginger model.py                            (Daniel Henrique Barboza)
 * [5f90ddc] dasd_utils.py: fixing imports                                                  (Daniel Henrique Barboza)
 * [9bae072] test_storage_devs.py: import adjustments                                       (Daniel Henrique Barboza)
 * [6fad9be] Removing circular reference between utils and dasd_utils                       (Daniel Henrique Barboza)
 * [2b4f810] Initial Back-end changes for platform management enhancements                  (Hari G M)
 * [d0e2af2] Introducing iSCSI implementation for Storage devices                           (Rajat Gupta)
 * [afe3402] Issue #382: Add user access logs to iSCSI Auth                                 (Harshal Patil)
 * [c4e16d6] Issue #382: iSCSI target specific and global auth config                       (Harshal Patil)
 * [4b9924f] Issue #381: 'make clean' does not revert its changes from 'make rpm'           (Bianca Carvalho)
 * [6fec29c] Capabilities API: get current feature state                                    (Daniel Henrique Barboza)
 * [2b9565f] Make all is_feature_available methods static                                   (Daniel Henrique Barboza)
 * [317d4d7] Fixing miscellaneous issues in swap functionalities                            (Nagamani Chennuboina)
 * [6c73928] Fixing miscellaneous issues in swap functionalities                            (Nagamani Chennuboina)
 * [10af984] Add missing user request log messages                                          (Lucio Correia)
 * [762e2e9] Remove duplicated entry                                                        (Lucio Correia)
 * [4826f3b] Revert "Use past verbs and other log message improvements"                     (Lucio Correia)
 * [56b0aaa] Move audit error messages along to correct section                             (Lucio Correia)
 * [260e87b] Ginger control: import control classes using sub_node                          (Daniel Henrique Barboza)
 * [9bd9ee1] test/test_authorization.py: test changes after urlsubnode change               (Daniel Henrique Barboza)
 * [ba0c086] Removing control/nfsshares.py file                                             (Daniel Henrique Barboza)
 * [5affd69] Control classes: fixing @UrlSubNode calls                                      (Daniel Henrique Barboza)
 * [a1054c2] Issue #372 : Add support for target rescan                                     (Harshal Patil)
 * [0efe826] docs/API.md : adding configuration backup APIs                                 (Daniel Henrique Barboza)
 * [3fac3f0] docs/API.md: removing duplicated ibm_sep entry                                 (Daniel Henrique Barboza)
 * [3988eab] Introducing Volume Group related operations.                                   (Atreyee Mukhopadhyay)
 * [6df0850] Introducing Volume group related operations.                                   (Atreyee Mukhopadhyay)
 * [17cca53] Introducing Volume group related operations.                                   (Atreyee Mukhopadhyay)
 * [597159e] Update stringutils imports                                                     (Lucio Correia)
 * [fb9b53d] Issue #377 : Full Width and Arabic digits not accepted for batch delete of c.. (Pooja Kulkarni)
 * [e4beb6d] Revert "Globalisation support - externalize all remaining strings for ginger.. (Daniel Henrique Barboza)
 * [3b3a91b] Issue #372 : Add support to target authentication                              (Harshal Patil)
 * [7a762e6] Globalisation support - externalize all remaining strings for ginger plugin.   (Pooja Kulkarni)
 * [e79ead0] Modify the info returned by partitions listing API                             (Pooja Kulkarni)
 * [9dbae80] Issue #375 :Fifteen Character VLAN device name not being recognized as a val.. (Atreyee Mukhopadhyay)
 * [85317f0] Issue #376:Unable to edit the text field or click submit/cancel after press .. (Atreyee Mukhopadhyay)
 * [74182c9] Time out while generating config back up file leave the tar file behind        (Bianca Carvalho)
 * [9439806] Issue #372 : iSCSI Discovery and IQN actions support                           (Harshal Patil)
 * [a84c1c5] Audit rules backend: new tests file test_rules                                 (Megha Smriti)
 * [617cf53] Audit rules backend: changes in controls, ginger.py and model/model.py         (Megha Smriti)
 * [bbeea7b] Audit rules backend: API doc and i18n.py changes.                              (Megha Smriti)
 * [ebce57e] Audit rules backend: new model/rules.py module                                 (Megha Smriti)
 * [a1e3df9] Introducing File system related operations.                                    (Atreyee Mukhopadhyay)
 * [26e0858] Introducing File system related operations.                                    (Atreyee Mukhopadhyay)
 * [f93c2f6] Introducing File system related operations.                                    (Atreyee Mukhopadhyay)
 * [b85b15f] Extend Filesystem mounting to include mount options                            (Pooja Kulkarni)
 * [4de6c14] Added cursor for tasks in progress                                             (Samuel Guimarães)
 * [e3d5254] Improvements on Configuration Backup UI                                        (peterpennings)
 * [670fdf8] Github #94: OpenSUSE network support                                           (Daniel Henrique Barboza)
 * [ba7623c] Implementation of Partition for storage devices                                (Rajat Gupta)
 * [97f0d08] Issue #371 : Create disk partitions takes integer input for size               (Pooja Kulkarni)
 * [4c1f481] Github #121: WoK log flooded by hddtemp messages                               (Daniel Henrique Barboza)
 * [84f43d5] Issue #300 : Redesign "Network Configuration" UI                               (Nagamani Chennuboina)
 * [4cb9b33] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [6811742] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [aea7709] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [32f2841] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [930c71d] Issue #299: Redesign "Global Network Configuration" UI                         (Samuel Guimarães)
 * [3529cd9] Removing debug info from model/users.py                                        (Daniel Henrique Barboza)
 * [35b6160] Github #222: do not allow reload of modules                                    (Daniel Henrique Barboza)
 * [bec075c] ginger.spec.in: rpmlint fixes                                                  (Daniel Henrique Barboza)
 * [d7f4833] Github #195 - adding %dir directives in ginger.spec.in                         (Daniel Henrique Barboza)
 * [707669b] Issue 341: Add scrollbar to Sysmodules and System Services                     (Samuel Guimarães)
 * [af75818] tests/test_backup.py: adding new unit test                                     (Daniel Henrique Barboza)
 * [cee16d5] Removing the config files (using command line) not reflecting in the UI        (Bianca Carvalho)
 * [9c652ea] Github #31: make check now runs the unit tests                                 (Daniel Henrique Barboza)
 * [82d17ad] Redesign Volume Group UI                                                       (peterpennings)
 * [c5f3193] Redesign SAN Adapters UI                                                       (peterpennings)
 * [415b8cb] Show wok error message if firmware update fails                                (Lucio Correia)
 * [f3843e8] Reenable firmware package path field after task is finished                    (Lucio Correia)
 * [44b08f1] pep8 fix on model/firmware.py                                                  (Daniel Henrique Barboza)
 * [0a7c000] Update firmware upgrade tests to use single async task                         (Lucio Correia)
 * [09104e5] Update firmware upgrade UI to use single async task                            (Lucio Correia)
 * [44b6494] Fix firmware commit and reject operations                                      (Lucio Correia)
 * [fd9be7d] Use single async task for firmware upgrade                                     (Lucio Correia)
 * [421c2fc] Add the ability to disable SR-IOV                                              (Socorro Stoppler)
 * [b9ecdc1] Issue #367 : VG Name only seen when a particular partition is looked up        (Pooja Kulkarni)
 * [06c7e4a] Implementing listing of NFS shares for specified server                        (Pooja Kulkarni)
 * [63d4fe4] Implementing listing of NFS shares for specified server                        (Pooja Kulkarni)
 * [6f71dea] Implementing listing of NFS shares for specified server                        (Pooja Kulkarni)
 * [2ef3394] Issue #348. Activation of physical device and BOND/VLAN.                       (Megha Smriti)
 * [342059d] Make sure all log messages have required parameters                            (Lucio Correia)
 * [da9daca] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [b7435ca] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [3135796] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [bfb088c] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [a8175f7] Password Change feature for Users                                              (Suresh Babu Angadi)
 * [5216c8b] Password Change feature for Users                                              (Suresh Babu Angadi)
 * [ff11621] Password Change feature for Users                                              (Suresh Babu Angadi)
 * [2bf9e05] ChangeLog and Version update to 2.2                                            (Daniel Henrique Barboza)
 * [02ca226] Updating translation files                                                     (Daniel Henrique Barboza)
 * [46a9be2] Remomving break-lines from i18n.py                                             (Daniel Henrique Barboza)
 * [079d825] Issue #320: Redesign 'Sensor Monitor' UI                                       (Samuel Guimarães)
 * [63b5258] Issue #366 : Filtering on partitions needs to be improved to match exact dev.. (Pooja Kulkarni)
 * [b7ac4fd] Issue #360: Refreshing volume groups keeps on loading                          (Samuel Guimarães)
 * [54a215c] Fixed Issue #363 - Issue while updating MTU in network interface file          (Rajat Gupta)
 * [da19756] Fixed Issue #362 - NW operation failed for cfginterface with "BOOTPROTO":"au.. (Rajat Gupta)
 * [4a0548c] Issue #364 : No need to show 'tmpfs' type in filesystem listing                (Pooja Kulkarni)
 * [8d10aae] test_interfaces.py: adding tests to VF = 0 scenario                            (Daniel Henrique Barboza)
 * [d705dda] SR-IOV for ConnectX-4: 0 (zero) VF setup changes                               (Daniel Henrique Barboza)
 * [d911bd0] Disable CX4 SR-IOV setup when selecting a VF                                   (Daniel Henrique Barboza)
 * [4661157] Adding nic_type to interfaces: UI changes                                      (Daniel Henrique Barboza)
 * [4c2633d] Adding nic_type to interfaces: control and model changes                       (Daniel Henrique Barboza)
 * [76ff07c] Adding nic_type to interfaces: doc changes                                     (Daniel Henrique Barboza)
 * [8106721] Issue #355 : Fix for partition listing API taking long time                    (Pooja Kulkarni)
 * [2e2e2c0] Issue #361 : Delete operation on swap file does not remove the file            (Pooja Kulkarni)
 * [21860c6] Include VG name in partitions details                                          (Pooja Kulkarni)
 * [36c645f] model/services.py: fixing cgroup parsing                                       (Daniel Henrique Barboza)
 * [942c147] model/services.py: adding docstrings and pylint fixes                          (Daniel Henrique Barboza)
 * [6e5c7ba] Fix sensor unit verification                                                   (Ramon Medeiros)
 * [2a67946] Issue #349 : Replace converters to use locale converters defined in wok        (Pooja Kulkarni)
 * [c769b5a] Issue #357 - Listing of PVs shows size in different units                      (Pooja Kulkarni)
 * [00dd2d8] model/sanadapters.py: adding docstring and pylint fixes                        (Daniel Henrique Barboza)
 * [5e6b353] Add 'port_type' to sanadapters API: UI changes                                 (Daniel Henrique Barboza)
 * [c3f9962] Add 'port_type' to sanadapters API: model changes                              (Daniel Henrique Barboza)
 * [a10909a] Add 'port_type' to sanadapters API: docs/API.md changes                        (Daniel Henrique Barboza)
 * [efa0d6e] Substitute quotes by apostrophe in configuration file                          (Rodrigo Trujillo)
 * [6929a57] ui/pages/Makefile.am: adding wildcard to add .tmpl files                       (Daniel Henrique Barboza)
 * [13db946] Issue# 342 : Sysmodules HYGIENE Unload of a kernel module is not persistent .. (Atreyee Mukhopadhyay)
 * [cbf6620] Issue #125: Delete volumegroup fails with 500                                  (Harshal Patil)
 * [c022260] Issue #334: Ginger spec file is restarting Wokd service twice                  (Ramon Medeiros)
 * [2fbae22] Show error message when update_flash fails.                                    (Paulo Vital)
 * [160610e] Fix UI notification of Firmware Update.                                        (Paulo Vital)
 * [6fcfd84] Fix overwrite-perm processing in Firmware Update                               (Paulo Vital)
 * [49798b5] model/interfaces.py: mlx5_core driver SR-IOV delay workaround                  (Daniel Henrique Barboza)
 * [57fb193] SR-IOV fixes after hardware testing: unit test changes                         (Daniel Henrique Barboza)
 * [d764c9a] SR-IOV fixes after hardware testing - nw_interfaces_utils.py                   (Daniel Henrique Barboza)
 * [864c3a5] SR-IOV fixes after hardware testing - model/interfaces.py                      (Daniel Henrique Barboza)
 * [45d74bc] Issue #129 : Reduce Volume Group fails with 500 status code.                   (Harshal Patil)
 * [0fff82d] Edit interface mac address: UI changes                                         (Daniel Henrique Barboza)
 * [a45efa7] Edit interface mac address: test changes                                       (Daniel Henrique Barboza)
 * [0fa01af] Edit interface mac address: doc and model changes                              (Daniel Henrique Barboza)
 * [0d88b97] Issue #128 : PVs part of existing VGs should not be allowed to be extended i.. (Harshal Patil)
 * [27ad7d0] Externalised strings and updated .pot and *.po files                           (Pooja Kulkarni)
 * [db2ee78] fix for issue #340                                                             (Suresh Babu Angadi)
 * [3c9c241] Issue #325 : vgdisplay api failed on ubuntu                                    (Harshal Patil)
 * [e28daf4] Issue #325 : Test cases for lvm version code                                   (Harshal Patil)
 * [02ff4eb] Ginger issue #336, raise ValueError if type is not bonding or vlan             (Jayavardhan Katta)
 * [72a033a] Changing is_feature_enabled of OVSBridgesModel                                 (Daniel Henrique Barboza)
 * [f879f46] SR-IOV enablement for mellanox connectx4 card                                  (peterpennings)
 * [202571c] Update sensors tests                                                           (Ramon Medeiros)
 * [264ebd3] Issue #320: Redesign "Sensor Monitor" UI                                       (Ramon Medeiros)
 * [541b771] Issue #304. Check for carrier value of each interface after activation         (Megha Smriti)
 * [b6f941c] Keeping 'Add User' panel in sync with users listing                            (Suresh Babu Angadi)
 * [7865c13] fix for issue #338                                                             (Suresh Babu Angadi)
 * [310abf9] Use past verbs and other log message improvements                              (Lucio Correia)
 * [ad32f97] Translate user request log messages                                            (Lucio Correia)
 * [5543aab] Issue # 335 : Settings page not opening for 'bonding'                          (Atreyee Mukhopadhyay)
 * [7328bfb] Removed the libvirt from contrib, docs, spec and UI help pages                 (Jayavardhan Katta)
 * [9430c8c] Removed the dependency of libvirt from network.py                              (Jayavardhan Katta)
 * [12169a1] Fix provided to assign variables based on distribution                         (Jayavardhan Katta)
 * [337bf95] Removed the dependency of libvirt from interfaces.py and removed correspondi.. (Jayavardhan Katta)
 * [bfe7d54] Make get_fc_path_elements arch-independent                                     (Lucio Correia)
 * [a225e35] Fixed issue #333 : Network Configuration BootGrid listing is not showing pro.. (Rajat Gupta)
 * [73f3354] System Services front-end                                                      (Samuel Guimarães)
 * [95b02a2] Multi-Culture support : Format storage related fields as per user locale       (Pooja Kulkarni)
 * [6bca555] Multi-Culture support : Format datetime in configuration backup as per user .. (Pooja Kulkarni)
 * [c076230] ][PATCH v2 1/3] Multi-Culture support : Format fields as per locale            (Pooja Kulkarni)
 * [01a2645] Adding missing copyright in js and css files                                   (Daniel Henrique Barboza)
 * [e41cf6b] OVS Bridges front-end                                                          (sguimaraes943@gmail.com)
 * [7cda76b] Add unit for each sensor and add 0 when value is N/A                           (Ramon Medeiros)
 * [aaf6af1] Interfaces model: adding 'rdma_enabled' attribute                              (Daniel Henrique Barboza)
 * [ef30828] Remove any cherrypy configuration from gingerbase.conf file                    (Aline Manera)
 * [93dfd35] Remove cherrypy root configuration from gingerbase.conf file                   (Aline Manera)
 * [73e9822] Migration to Gingerbase netinfo: deleting model/netinfo.py                     (Daniel Henrique Barboza)
 * [2ccc41b] Migration to Gingerbase netinfo: test changes                                  (Daniel Henrique Barboza)
 * [393a75b] Migration to Gingerbase netinfo: in-code netinfo parameters                    (Daniel Henrique Barboza)
 * [62e16b1] Migration to Gingerbase netinfo: changing imports                              (Daniel Henrique Barboza)
 * [b84fa3d] Add wok-robot header to /sensors requests                                      (Aline Manera)
 * [9f6010f] Issue #317: removing 's390x' references from po files                          (Daniel Henrique Barboza)
 * [54efb97] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [18420a0] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [53cc370] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [d27149c] Issue #317: Ginger should NOT depend on Gingers390x.                           (Atreyee Mukhopadhyay)
 * [a4eb2b6] Fix paths and keep symbolic link when updating                                 (Ramon Medeiros)
 * [5c9e3f3] RDMA support for ConnectX-4 cards - UI                                         (peterpennings)
 * [aa7f346] Fix some PEP8 issues                                                           (Rodrigo Trujillo)
 * [c5eee8e] SR-IOV for ConnectX-4: adding script config calls in task                      (Daniel Henrique Barboza)
 * [278ebc5] tests/test_interfaces.py: script manipulation use cases                        (Daniel Henrique Barboza)
 * [4977446] SR-IOV for ConnectX-4: script managing functions                               (Daniel Henrique Barboza)
 * [cbc9247] Support non-ascii characters in nw_interfaces_utils by handling UTF-8 support. (Archana Singh)
 * [0434075] Support non-ascii characters in nw_cfginterfaces_utils by handling UTF-8 sup.. (Archana Singh)
 * [7bca153] Support non-ascii characters in network by handling UTF-8 support.             (Archana Singh)
 * [d33f6e3] Support non-ascii characters in netinfo by handling UTF-8 support.             (Archana Singh)
 * [6f03c8b] Support non-ascii characters in interfaces by handling UTF-8 support.          (Archana Singh)
 * [a7d9b57] Support non-ascii characters in cfginterfaces by handling UTF-8 support.       (Archana Singh)
 * [e093ca5] Issue #329 : Error message not getting displayed                               (Harshal Patil)
 * [f24f623] tests/test_interfaces.py: adapting to the API rename                           (Daniel Henrique Barboza)
 * [f7d9a59] SR-IOV for ConnectX-4: API change                                              (Daniel Henrique Barboza)
 * [d7827f8] tests/test_interfaces: asynchronous backend changes                            (Daniel Henrique Barboza)
 * [9c561da] SR-IOV for ConnectX-4: asynchronous backend                                    (Daniel Henrique Barboza)
 * [122d20f] Issue # 328 : Gateway field in Global Network configuration taking invalid v.. (Atreyee Mukhopadhyay)
 * [00a9f1a] Issue #323 Move gridfield titles, button labels and other messages to i18n     (Pooja Kulkarni)
 * [746a862] Issue #324 : In Storage section: Tape devices and SAN adapters are misaligned  (Nagamani Chennuboina)
 * [1f5e151] Fixing ui/css/ginger.css license mismatch after compiling it                   (Daniel Henrique Barboza)
 * [e7254fb] SR-IOV for ConnectX-4 pre-check: test changes                                  (Daniel Henrique Barboza)
 * [f69736c] SR-IOV for ConnectX-4 pre-check: model changes                                 (Daniel Henrique Barboza)
 * [bc17e6f] tests/test_backup.py: inserting task.wait() call                               (Daniel Henrique Barboza)
 * [d9a4ea8] Issue #326 : In Network tab, Mispelled message about DNS server change.        (Nagamani Chennuboina)
 * [728bfef] Issue #321 : Config backup timeout fix                                         (Harshal Patil)
 * [1220ea1] fix for issue #322                                                             (Suresh Babu Angadi)
 * [a22a666] UI changes to accomodate user profile change                                   (Harshal Patil)
 * [16b152b] Modified unit tests with mock module                                           (Suresh Babu Angadi)
 * [ebc3d05] Multiple fixes                                                                 (Suresh Babu Angadi)
 * [efc0f6b] test/test_cfginterfaces.py: new unit tests                                     (Daniel Henrique Barboza)
 * [9232806] model/nw_cfginterfaces_utils.py: create a new config file                      (Daniel Henrique Barboza)
 * [4579605] Only remove method from interfaces if index exists                             (Ramon Medeiros)
 * [913ee05] Removed Typeahead.js CSS from Ginger                                           (Samuel Guimarães)
 * [5be9712] Fixed Issue #312 Preserve the latest backups is not selectable.                (Rajat Gupta)
 * [4f17899] Issue # 315 : Storage Device listing shows "Not Record Found" till the time .. (Atreyee Mukhopadhyay)
 * [a6d43ba] Issue #296 Bad recovery for entry of a faulty DNS address                      (Jayavardhan Katta)
 * [b11de2c] Issue #310 : Large number of DASD format operations                            (Harshal Patil)
 * [63b3d5c] Fixing JS error in ui/js/util.js                                               (Daniel Henrique Barboza)
 * [cd1dfaf] Fixed issue #311 IPV6 fields UI Validation                                     (Nagamani Chennuboina)
 * [a5966b6] Fixed issue #309 configuration backup UI enhancement                           (Rajat Gupta)
 * [1871b8b] Issue #305 Interfaces with existing ethernet device cannot be created and er.. (Megha Smriti)
 * [ca8114e] Issue #303. Error thrown when an interface is deleted and the ifcfg file doe.. (Megha Smriti)
 * [d8c53fd] Services backend: test changes                                                 (Daniel Henrique Barboza)
 * [81eaffe] Services backend: model changes                                                (Daniel Henrique Barboza)
 * [b44b7a8] Services backend: ginger.py and control changes                                (Daniel Henrique Barboza)
 * [d6e6421] Services backend: i18n and docs/API.md changes                                 (Daniel Henrique Barboza)
 * [4586fcc] Issue #249 - Part 2 - Sorting on size gives incorrect results                  (Pooja Kulkarni)
 * [826a60f] Fixed tracking devices counter for storage devices                             (Rajat Gupta)
 * [4c0803c] Modified the unit testcases as per fine tuned code.                            (Megha Smriti)
 * [791c15a] Added cfginterfaces utils file as a part of networking fine tuned code.        (Megha Smriti)
 * [e9354b1] Added interfaces utils file as a part of networking fine tuned code.           (Megha Smriti)
 * [121b479] Networking Fine tuned code for interfaces.                                     (Megha Smriti)
 * [77d6289] Networking Fine tuned code for cfginterfaces.                                  (Megha Smriti)
 * [65d5b46] Modified netinfo and i18n.py as a part of fine tuned code.                     (Megha Smriti)
 * [e8aaa6f] ui/js/host-network-enable-sriov.js: code style fixes                           (Daniel Henrique Barboza)
 * [8a317a2] SR-IOV modal for mlx5-core interfaces                                          (peterpennings)
 * [214b723] Issue #249 Sorting on size gives incorrect results                             (Pooja Kulkarni)
 * [ac4991a] Added support for UTF-8 encoding in user management.                           (Archana Singh)
 * [708b018] Added support for UTF-8 encoding in storage devices.                           (Archana Singh)
 * [fde8194] Added support for UTF-8 encoding in dasd storage.                              (Archana Singh)
 * [8295336] Added support for UTF-8 encoding in backup configuration.                      (Archana Singh)
 * [a3453c4] Fixed Issue #235 ADMIN:Create Backup Panel will not work                       (Rajat Gupta)
 * [fc945a6] fix for issue #227 and #234                                                    (Suresh Babu Angadi)
 * [d8f33a6] Modifying error codes on model/interfaces.py                                   (Daniel Henrique Barboza)
 * [a649117] SR-IOV for mlx5 interfaces: test changes                                       (Daniel Henrique Barboza)
 * [0990297] SR-IOV for mlx5 interfaces: control and model changes                          (Daniel Henrique Barboza)
 * [197c927] SR-IOV for mlx5 interfaces: docs/api.md and i18n changes                       (Daniel Henrique Barboza)
 * [9399aa4] Adding 'module' into interfaces API: test changes                              (Daniel Henrique Barboza)
 * [036a8fe] Adding 'module' into interfaces API: model changes                             (Daniel Henrique Barboza)
 * [739834e] Adding 'module' into interfaces API: sysmodule changes                         (Daniel Henrique Barboza)
 * [f71b016] Adding 'module' into interfaces API: docs and control changes                  (Daniel Henrique Barboza)
 * [885ad6e] Github #260: packaging changes and wok version restiction                      (Daniel Henrique Barboza)
 * [b04ea6e] ChangeLog for 2.1.0 release                                                    (Daniel Henrique Barboza)
 * [79b48f8] po files update prior to 2.1 release                                           (Daniel Henrique Barboza)
 * [ab717b7] Fixing i18n.py and ui/pages/i18n.json.tmpl messages                            (Daniel Henrique Barboza)
 * [130e5c2] Fixed Issue #233 error message appears in closeable format                     (Rajat Gupta)
 * [2582b41] Issue # 230 and #231.                                                          (Megha Smriti)
 * [c09657e] Issue # 232 : In Storage tab the bottom lines are miss-aligned on each secti.. (Atreyee Mukhopadhyay)
 * [53575df] Fixed issues in VLAN and BOND creation                                         (Jayavardhan Katta)
 * [2b875a6] Fix for issue #215                                                             (Suresh Babu Angadi)
 * [ca9f1d8] Issue #102 Create partition fails with 500                                     (Harshal Patil)
 * [200898e] Issue #133 Delete physical volume fails with 500 status code                   (Pooja Kulkarni)
 * [618f7c1] Ginger Issue #113: Delete operation for /dasdpartitions fails with 500         (Pawan Kumar)
 * [539092c] Issue #140 : Create swap file fails                                            (Harshal Patil)
 * [fc38b7d] Improve user request log messages                                              (Lucio Correia)
 * [2ceb7b2] OVS backend: Avoid error message in WoK start                                  (Daniel Henrique Barboza)
 * [4bd5862] Issue #223: list isn't refreshing after unload                                 (Samuel Guimarães)
 * [873dec7] Issue #225 Storage devices listing API timesout if large number of FC device.. (Pooja Kulkarni)
 * [bd4ef81] Fix Ginger UI: SEP container is hidden after start service                     (Rodrigo Trujillo)
 * [cdd9b9e] Updated Ginger SCSS to import new Wok accordion mixin                          (Samuel Guimarães)
 * [18b4c61] OVS bridges backend: new tests file test_ovsbridges.py                         (Daniel Henrique Barboza)
 * [9b2ccf0] OVS bridges backend: new model/ovsbridges.py module                            (Daniel Henrique Barboza)
 * [1786406] OVS bridges backend: changes in controls, ginger.py and model/model.py         (Daniel Henrique Barboza)
 * [c628f04] OVS bridges backend: docs/API.md and i18n.py changes                           (Daniel Henrique Barboza)
 * [a66167d] Customize user request log messages                                            (Lucio Correia)
 * [476afc0] Adding svg files to ginger spec file                                           (Daniel Henrique Barboza)
 * [2b20636] Adding svg pictures to IBM blacklist                                           (Daniel Henrique Barboza)
 * [6a7cb11] Added Ginger new SVG logo for login page, footer and about window              (Samuel Guimarães)
 * [5d2f4cc] Github #224: adding all JS files in ui/js/Makefile.am                          (Daniel Henrique Barboza)
 * [f8c6071] Removing rstrip() calls just after strip()                                     (Daniel Henrique Barboza)
 * [5ce7c92] Fix PEP8 issues according to 1.5.7 version                                     (Aline Manera)
 * [a9bb201] Update pkg-version script to work with submodules                              (Aline Manera)
 * [0b6ddd2] Expose Ginger version on /config URI                                           (Aline Manera)
 * [a7e9aec] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [580cca5] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [26b1534] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [290e46c] Multiple UI Fixes                                                              (Jan Schneider)
 * [83779b9] Multiple UI Fixes                                                              (Suresh Babu Angadi)
 * [a67cccb] Multiple UI Fixes                                                              (Suresh Babu Angadi)
 * [ccefa8f] Multiple UI Fixes                                                              (Rajat Gupta)
 * [191602e] Multiple UI Fixes                                                              (Rajat Gupta)
 * [6144b1f] Multiple UI Fixes                                                              (Rajat Gupta)
 * [d629442] Copyright fixes for sysmodules UI files                                        (Daniel Henrique Barboza)
 * [9588c87] Sysmodules modal window and form validation v3                                 (Samuel Guimarães)
 * [f8b4ed7] Sysmodules (SR-IOV) details accordion v3                                       (Samuel Guimarães)
 * [755179c] Sysmodules (SRIOV) tab initial implementation v2                               (Andre Teodoro)
 * [45c29be] Implement locking for network functions                                        (Jayavardhan Katta)
 * [ce99c8c] Changes for ginger to fix the Issue# 28 in Wok.                                (Atreyee Mukhopadhyay)
 * [95e62d8] Add missing license header                                                     (Aline Manera)
 * [d1d7209] Use check-IBM-license-header.sh from Wok                                       (Aline Manera)
 * [bfb75ed] Fix PEP8 according to PEP8 1.5.7 version                                       (Aline Manera)
 * [9f8b9b9] Issue #217 Storage devices listing API timesout if large number of DASD devi.. (Pooja Kulkarni)
 * [3455e0e] Ginger Issue #216:Inconsistency in display of DASD and FCLUNS size.            (Pawan Kumar)
 * [69ec91b] Issue #209 GUI shows wrong units for swap devices                              (Harshal Patil)
 * [58e46ca] Issue #210 Multipath friendly names not showing correct number of paths        (Pooja Kulkarni)
 * [549aa2e] Issue #205 List storage device fails when FC devices are removed in multithr.. (Pooja Kulkarni)
 * [1100f06] Adjustments after issue #202 fix                                               (Daniel Henrique Barboza)
 * [b16b6cf] Wok failed to start due Ginger dependency on libvirt                           (Chandra Shekhar Reddy Potula)
 * [b638fb1] Help page content update to reflect the current UI pages                       (Chandra Shekhar Reddy Potula)
 * [465dc9a] Fix ginger issues as #67 #71 #139 #141 #163                                    (Megha Smriti)
 * [e68c0a0] Fix for issue #199                                                             (Suresh Babu Angadi)
 * [bc55068] Fix for issue #198                                                             (Suresh Babu Angadi)
 * [817a95c] vlan UI html changes to relax interface naming convention                      (Chandra Shekhar Reddy Potula)
 * [ce0bd02] vlan UI js changes to relax interface naming convention                        (Chandra Shekhar Reddy Potula)
 * [ab92d8b] Fixing vlan and bond issues in cfginterfaces                                   (Jayavardhan Katta)
 * [02272a8] IBM copyright changes across the board                                         (Daniel Henrique Barboza)
 * [20d4da8] Adding IBM license verification in check-local                                 (Daniel Henrique Barboza)
 * [07118b2] Address-List-Issues-In-Interface                                               (abhiramk)
 * [57287cb] test_physicalvol: fixing error messages match                                  (Daniel Henrique Barboza)
 * [f1d9245] Fix PEP8 issues according to PEP8 1.5.7 version                                (Aline Manera)
 * [515dd06] Require authentication to APIs which provide detailed system information       (Aline Manera)
 * [907eeb3] Add authorization tests to confirm Ginger continues working as expected with.. (Aline Manera)
 * [55e7ee1] Use UrlSubNode to enable resource authentication                               (Aline Manera)
 * [b27d560] Github #193: Modified the ipv4 and ipv6 code to accept valid values            (Megha Smriti)
 * [58470e6] Issue #161: Storage device listing buttons are always enabled                  (Jan Schneider)
 * [cbeb7e9] sysmodules backend: adding 'mlx4_core' alias                                   (Daniel Henrique Barboza)
 * [8851ca6] Makefile.am targets enhancements                                               (Daniel Henrique Barboza)
 * [d9a643b] Fix Issue #192                                                                 (Rajat Gupta)
 * [599a5e1] Updated API.md file to update the doc for the information for the URI /plugi.. (Megha Smriti)
 * [8ae7952] Unit tests: changing 'models' to 'model'                                       (Daniel Henrique Barboza)
 * [9c5ad57] Renaming 'models' to 'model': changes in Makefiles                             (Daniel Henrique Barboza)
 * [f96561a] Renaming 'models' directory to 'model'                                         (Daniel Henrique Barboza)
 * [2095409] Changes in RPM spec:                                                           (Daniel Henrique Barboza)
 * [9a2e3aa] Rename 'controls' to 'control' in Ginger files                                 (Daniel Henrique Barboza)
 * [8fde01e] Rename 'controls' dir to 'control'                                             (Daniel Henrique Barboza)
 * [529ac7a] Fix ginger issue #191. Clean routes.                                           (abhiramk)
 * [aff9ed2] Revert "Adding sub_nodes to __init__.py"                                       (Daniel Henrique Barboza)
 * [f4ebbc2] Fix ginger issue #108                                                          (abhiramk)
 * [cd36819] UI page new look for global network configuration                              (Chandra Shekhar Reddy Potula)
 * [9a2280f] Javascipt changes to global network configuration                              (Chandra Shekhar Reddy Potula)
 * [b582bd2] CSS code changes to global network configuration                               (Chandra Shekhar Reddy Potula)
 * [497352e] Code changes to global network configuration back end                          (Chandra Shekhar Reddy Potula)
 * [a85e2f6] Issue #162: Format DASD UI messages are corrected                              (Rajat Gupta)
 * [0c0c1d7] Issue #188: DASD format/remove fails with no reason specified.                 (Pawan Kumar)
 * [4c0b928] tests/test_partitions: test failing when real sdb1 mounted                     (Daniel Henrique Barboza)
 * [6c47159] Update API.md for interface API. Issue #69                                     (abhiramk)
 * [44b22d2] Fix bond and vlan creation issue                                               (abhiramk)
 * [80227f9] Fixing tests/test_cfginterfaces                                                (Daniel Henrique Barboza)
 * [3ac39d3] This patch addresses ginger issues #109 , #110 , #124, #126                    (Abhiram Kulkarni)
 * [15a70c8] Adding sub_nodes to __init__.py                                                (Daniel Henrique Barboza)
 * [59eda64] Update Ginger configuration according to recent changes on Wok                 (Aline Manera)
 * [4123f0e] Fix for ginger issue #70 with double quotes.                                   (Megha Smriti)
 * [06200b3] Bug fixing in the Network page (#159 and #179)                                 (Chandra Shekhar Reddy Potula)
 * [6b1267f] Fix for issue #180                                                             (Suresh Babu Angadi)
 * [ed6b494] Issue #23 : SAN Adapters Listing is not proper on UI                           (Harshal Patil)
 * [cfb2191] Fixes for modal network bond page                                              (Chandra Shekhar Reddy Potula)
 * [2a7120e] Fixes for modal network settings page                                          (Chandra Shekhar Reddy Potula)
 * [e8b0f42] Fixes for modal network vlan page                                              (Chandra Shekhar Reddy Potula)
 * [e2ce2e2] Fix Firmware Update arguments parsing.                                         (Paulo Vital)
 * [b579d7e] fix for Issue# 143                                                             (Rajat Gupta)
 * [ccb158d] Fixing test_firmwareprogress and copyrights                                    (Daniel Henrique Barboza)
 * [1087fc0] Update test_firmware.                                                          (Paulo Vital)
 * [11e37cd] Change Firmware Update command from PUT to POST                                (Paulo Vital)
 * [7cba67d] Fix serviceable package name                                                   (Jose Ricardo Ziviani)
 * [bb15e99] Fix for issue #169 in ginger plugin                                            (Megha Smriti)
 * [abd6652] Issue #185 VLAN interface UI issues                                            (Chandra Shekhar Reddy Potula)
 * [eb0ac3f] Fix ginger issue #144                                                          (abhiramk)
 * [f8dcc02] Issue #177 Incorrect multipath count for DASD devices                          (Harshal Patil)
 * [4556314] test_dasdpartitions: fixing import                                             (Daniel Henrique Barboza)
 * [c653c0d] Issue #101 GET /plugins/ginger/dasdpartitions/dasdi fails with 500             (Pooja Kulkarni)
 * [b88d114] Issue #164 Missing "device_name" in /filesystems                               (Pooja Kulkarni)
 * [6ec3963] Issue #178 Removing UUID from the tape device information affects the FCP ta.. (Pooja Kulkarni)
 * [2fb10e3] Fix error in wok_log.error() in models/users.py                                (Daniel Henrique Barboza)
 * [578cf61] Fixing i18n message of sysmodules                                              (Daniel Henrique Barboza)
 * [ab131f1] Issue #22 & #24 in ginger390x                                                  (Suresh Babu Angadi)
 * [3d629df] General unit test fixes in test_swap and test_firmwareprogress                 (Daniel Henrique Barboza)
 * [48dc3ed] Issue #171: NW UI: subchannels is not getting displayed in network setting p.. (Archana Singh)
 * [293b2df] Fixing issues with ginger - #82                                                (Jayavardhan Katta)
 * [415d60a] Prevent AsyncTask timeout error during FW Update.                              (Paulo Vital)
 * [c76f966] I18n changes and input field validation for bond                               (Atreyee Mukhopadhyay)
 * [5acd837] Issue# 157 : Hide settings, vlan and bond options on Ubuntu and SuSe           (Atreyee Mukhopadhyay)
 * [d43447e] Github #170: availability check of dasddevs API                                (Daniel Henrique Barboza)
 * [5401322] tests/test_sysmodules.py: additional tests                                     (Daniel Henrique Barboza)
 * [790da40] Github #137: model and API changes for sysmodule features                      (Daniel Henrique Barboza)
 * [0e6280a] Add FirmwareProgress UI                                                        (Paulo Vital)
 * [2f8f832] Github #168: wrong error code in lookup()                                      (Daniel Henrique Barboza)
 * [c0413ab] Fixing models.utils._pvdisplay_out() error codes                               (Daniel Henrique Barboza)
 * [b5b584b] Unit test changes for tests/test_physical_vol.py                               (Daniel Henrique Barboza)
 * [cbb2b2e] Github #133: fix status code and error message of remove_pv                    (Daniel Henrique Barboza)
 * [ab19f91] Issue #146 #147 #149 #151: configuration backup issues                         (Jose Ricardo Ziviani)
 * [48624eb] Issue #150: configuration backup records on click open and close multiple ti.. (Jose Ricardo Ziviani)
 * [86f2bc7] Issue #148: New Custom Backup allows blank data                                (Jose Ricardo Ziviani)
 * [bbc2c99] GET of interfaces to include inactibe Bond and Vlan interfaces                 (abhiramk)
 * [16bd192] Html page for Network UI VLAN page                                             (Chandra Shekhar Reddy Potula)
 * [75f8616] JS file changes for Networking UI VLAN page                                    (Chandra Shekhar Reddy Potula)
 * [9410d16] Html file changes for Network UI Bond page                                     (Atreyee Mukhopadhyay)
 * [abb244a] JS file changes for Network Bond UI page                                       (Atreyee Mukhopadhyay)
 * [bfb2e56] CSS changes for Network UI Bond page                                           (Atreyee Mukhopadhyay)
 * [4a78da4] makefile changes for network settings UI.                                      (Archana Singh)
 * [43b5450] i18n for network settings UI.                                                  (Archana Singh)
 * [3458198] html for network setting UI.                                                   (Archana Singh)
 * [b01365d] JS for network settings UI.                                                    (Archana Singh)
 * [37dd8aa] CSS for network settings UI.                                                   (Archana Singh)
 * [f6638f0] Fix for ginger issue #131                                                      (abhiramk)
 * [2322770] Fixing id of device element in ui/js/host-network.js                           (Daniel Henrique Barboza)
 * [3bbc785] Update API.md with user management information                                 (Jose Ricardo Ziviani)
 * [a60f426] Github #135: test cases in tests/test_swap.py                                  (Daniel Henrique Barboza)
 * [b9b61df] Github #135: Swap API return codes                                             (Daniel Henrique Barboza)
 * [9b77292] Fix ginger issues #42 , #109 , #110 , #111 and #112                            (abhiramk)
 * [686cecc] Fixing ginger issues #105 , #106 and #114                                      (Jayavardhan Katta)
 * [46ca1a3] Help page for storage tab for Ginger                                           (Chandra Shekhar Reddy Potula)
 * [8958a4e] Issue #115 : Few Links to the pages are missing under Storage Devices          (Chandra Shekhar Reddy Potula)
 * [86dd259] Issue #134: Missing group name lead to general error in ginger                 (Jose Ricardo Ziviani)
 * [e7da160] Adding CfginterfacesModel to the Capabilities API                              (Daniel Henrique Barboza)
 * [f0049d8] tests/test_ibmsep.py - Unit tests for IBM Sep models                           (Daniel Henrique Barboza)
 * [dd6dedb] models/sensors.py: adding 'hddtemp' as a prerequirement                        (Daniel Henrique Barboza)
 * [9473e0d] Unit test for Sensors model                                                    (Daniel Henrique Barboza)
 * [00fab54] Issue #120: Change Power Management Options does not work on a Power System    (Jose Ricardo Ziviani)
 * [94136cf] Issue #122: Cannot add a new user using Ginger interface                       (Jose Ricardo Ziviani)
 * [c4f43e8] Issue #100 : failed to comply with json schema for dasd device                 (Harshal Patil)
 * [93bdad4] Issue #98 : GET /plugins/ginger/stgdevs fails with 500                         (Harshal Patil)
 * [38c98ab] Fix python-ethtool repository and typos                                        (Lucio Correia)
 * [888cadf] Unit tests for models/backup.py models                                         (Daniel Henrique Barboza)
 * [91230a2] Github #119: adding sysmodules files to Makefile.am                            (Daniel Henrique Barboza)
 * [ff2238d] Adding unit tests for Firmware model                                           (Daniel Henrique Barboza)
 * [d9dd4a8] Unit tests for the PowerManagement model                                       (Daniel Henrique Barboza)
 * [0976922] SysModules backend: unit tests                                                 (Daniel Henrique Barboza)
 * [0c366fd] SysModules backend: model classes                                              (Daniel Henrique Barboza)
 * [d4e6a16] SysModules backend: control classes                                            (Daniel Henrique Barboza)
 * [79231fa] SysModules backend: docs/API.md and i18n changes                               (Daniel Henrique Barboza)
 * [58eb94f] Makefile.am: adding AUTOMAKE_OPTIONS=foreign                                   (Daniel Henrique Barboza)
 * [4802889] Issue #87 : GET operation /plugin/ginger/dasddevs/<bus id> fails with 500 st.. (Harshal Patil)
 * [b129721] Issue #90: GET on /plugins/ginger/filesystems/<mount point> fails with 500     (Ramon Medeiros)
 * [706f9e7] Update README.md                                                               (Paulo Vital)
 * [033077e] Moved README to docs dir and make it MK supported.                             (Paulo Vital)
 * [e0c20f5] Github issue #99                                                               (abhiramk)
 * [3ab2b94] Update README                                                                  (Lucio Correia)
 * [854ad28] ginger.spec.in: adding files using wildcard                                    (Daniel Henrique Barboza)
 * [bb1254d] Add FirmwareProgress unit test.                                                (Paulo Vital)
 * [2951678] Add FirmwareProgress classes.                                                  (Paulo Vital)
 * [9f951d3] Change to update firmware as AsyncTask.                                        (Paulo Vital)
 * [4c091c1] Fixing issues with cfginterfaces - #77 and #78                                 (Jayavardhan Katta)
 * [bbd4a37] Updating ginger.css                                                            (Daniel Henrique Barboza)
 * [dc60b46] Storage tab Implementation for Ginger plugin.                                  (Atreyee Mukhopadhyay)
 * [cd3b1e2] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [e5f1efe] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [e13565b] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [d37d8fa] Do not rely on python-pip to install build dependencies                        (Aline Manera)
 * [3872548] Keep one single CSS file per application                                       (Aline Manera)
 * [6c3b543] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [9223e41] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [188ce35] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [f3e95b2] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [7efe387] test_filesystems: using -F (force) option in create_file                       (Daniel Henrique Barboza)
 * [dd2ec19] Issue 88 : Missing unformatted DASD devices from storage API                   (Harshal Patil)
 * [3199b55] Issue #81: Failed to format a device/partition with type 'xfs'                 (Pooja Kulkarni)

#### [2.0.1] ####
 * [5e94c75] Fix 2.0.0 spec file                                                            (Daniel Henrique Barboza)

#### [2.2.0] ####
 * [2bf9e05] ChangeLog and Version update to 2.2                                            (Daniel Henrique Barboza)
 * [02ca226] Updating translation files                                                     (Daniel Henrique Barboza)
 * [46a9be2] Remomving break-lines from i18n.py                                             (Daniel Henrique Barboza)
 * [079d825] Issue #320: Redesign 'Sensor Monitor' UI                                       (Samuel Guimarães)
 * [63b5258] Issue #366 : Filtering on partitions needs to be improved to match exact dev.. (Pooja Kulkarni)
 * [b7ac4fd] Issue #360: Refreshing volume groups keeps on loading                          (Samuel Guimarães)
 * [54a215c] Fixed Issue #363 - Issue while updating MTU in network interface file          (Rajat Gupta)
 * [da19756] Fixed Issue #362 - NW operation failed for cfginterface with "BOOTPROTO":"au.. (Rajat Gupta)
 * [4a0548c] Issue #364 : No need to show 'tmpfs' type in filesystem listing                (Pooja Kulkarni)
 * [8d10aae] test_interfaces.py: adding tests to VF = 0 scenario                            (Daniel Henrique Barboza)
 * [d705dda] SR-IOV for ConnectX-4: 0 (zero) VF setup changes                               (Daniel Henrique Barboza)
 * [d911bd0] Disable CX4 SR-IOV setup when selecting a VF                                   (Daniel Henrique Barboza)
 * [4661157] Adding nic_type to interfaces: UI changes                                      (Daniel Henrique Barboza)
 * [4c2633d] Adding nic_type to interfaces: control and model changes                       (Daniel Henrique Barboza)
 * [76ff07c] Adding nic_type to interfaces: doc changes                                     (Daniel Henrique Barboza)
 * [8106721] Issue #355 : Fix for partition listing API taking long time                    (Pooja Kulkarni)
 * [2e2e2c0] Issue #361 : Delete operation on swap file does not remove the file            (Pooja Kulkarni)
 * [21860c6] Include VG name in partitions details                                          (Pooja Kulkarni)
 * [36c645f] model/services.py: fixing cgroup parsing                                       (Daniel Henrique Barboza)
 * [942c147] model/services.py: adding docstrings and pylint fixes                          (Daniel Henrique Barboza)
 * [6e5c7ba] Fix sensor unit verification                                                   (Ramon Medeiros)
 * [2a67946] Issue #349 : Replace converters to use locale converters defined in wok        (Pooja Kulkarni)
 * [c769b5a] Issue #357 - Listing of PVs shows size in different units                      (Pooja Kulkarni)
 * [00dd2d8] model/sanadapters.py: adding docstring and pylint fixes                        (Daniel Henrique Barboza)
 * [5e6b353] Add 'port_type' to sanadapters API: UI changes                                 (Daniel Henrique Barboza)
 * [c3f9962] Add 'port_type' to sanadapters API: model changes                              (Daniel Henrique Barboza)
 * [a10909a] Add 'port_type' to sanadapters API: docs/API.md changes                        (Daniel Henrique Barboza)
 * [efa0d6e] Substitute quotes by apostrophe in configuration file                          (Rodrigo Trujillo)
 * [6929a57] ui/pages/Makefile.am: adding wildcard to add .tmpl files                       (Daniel Henrique Barboza)
 * [13db946] Issue# 342 : Sysmodules HYGIENE Unload of a kernel module is not persistent .. (Atreyee Mukhopadhyay)
 * [cbf6620] Issue #125: Delete volumegroup fails with 500                                  (Harshal Patil)
 * [c022260] Issue #334: Ginger spec file is restarting Wokd service twice                  (Ramon Medeiros)
 * [2fbae22] Show error message when update_flash fails.                                    (Paulo Vital)
 * [160610e] Fix UI notification of Firmware Update.                                        (Paulo Vital)
 * [6fcfd84] Fix overwrite-perm processing in Firmware Update                               (Paulo Vital)
 * [49798b5] model/interfaces.py: mlx5_core driver SR-IOV delay workaround                  (Daniel Henrique Barboza)
 * [57fb193] SR-IOV fixes after hardware testing: unit test changes                         (Daniel Henrique Barboza)
 * [d764c9a] SR-IOV fixes after hardware testing - nw_interfaces_utils.py                   (Daniel Henrique Barboza)
 * [864c3a5] SR-IOV fixes after hardware testing - model/interfaces.py                      (Daniel Henrique Barboza)
 * [45d74bc] Issue #129 : Reduce Volume Group fails with 500 status code.                   (Harshal Patil)
 * [0fff82d] Edit interface mac address: UI changes                                         (Daniel Henrique Barboza)
 * [a45efa7] Edit interface mac address: test changes                                       (Daniel Henrique Barboza)
 * [0fa01af] Edit interface mac address: doc and model changes                              (Daniel Henrique Barboza)
 * [0d88b97] Issue #128 : PVs part of existing VGs should not be allowed to be extended i.. (Harshal Patil)
 * [27ad7d0] Externalised strings and updated .pot and *.po files                           (Pooja Kulkarni)
 * [db2ee78] fix for issue #340                                                             (Suresh Babu Angadi)
 * [3c9c241] Issue #325 : vgdisplay api failed on ubuntu                                    (Harshal Patil)
 * [e28daf4] Issue #325 : Test cases for lvm version code                                   (Harshal Patil)
 * [02ff4eb] Ginger issue #336, raise ValueError if type is not bonding or vlan             (Jayavardhan Katta)
 * [72a033a] Changing is_feature_enabled of OVSBridgesModel                                 (Daniel Henrique Barboza)
 * [f879f46] SR-IOV enablement for mellanox connectx4 card                                  (peterpennings)
 * [202571c] Update sensors tests                                                           (Ramon Medeiros)
 * [264ebd3] Issue #320: Redesign "Sensor Monitor" UI                                       (Ramon Medeiros)
 * [541b771] Issue #304. Check for carrier value of each interface after activation         (Megha Smriti)
 * [b6f941c] Keeping 'Add User' panel in sync with users listing                            (Suresh Babu Angadi)
 * [7865c13] fix for issue #338                                                             (Suresh Babu Angadi)
 * [310abf9] Use past verbs and other log message improvements                              (Lucio Correia)
 * [ad32f97] Translate user request log messages                                            (Lucio Correia)
 * [5543aab] Issue # 335 : Settings page not opening for 'bonding'                          (Atreyee Mukhopadhyay)
 * [7328bfb] Removed the libvirt from contrib, docs, spec and UI help pages                 (Jayavardhan Katta)
 * [9430c8c] Removed the dependency of libvirt from network.py                              (Jayavardhan Katta)
 * [12169a1] Fix provided to assign variables based on distribution                         (Jayavardhan Katta)
 * [337bf95] Removed the dependency of libvirt from interfaces.py and removed correspondi.. (Jayavardhan Katta)
 * [bfe7d54] Make get_fc_path_elements arch-independent                                     (Lucio Correia)
 * [a225e35] Fixed issue #333 : Network Configuration BootGrid listing is not showing pro.. (Rajat Gupta)
 * [73f3354] System Services front-end                                                      (Samuel Guimarães)
 * [95b02a2] Multi-Culture support : Format storage related fields as per user locale       (Pooja Kulkarni)
 * [6bca555] Multi-Culture support : Format datetime in configuration backup as per user .. (Pooja Kulkarni)
 * [c076230] ][PATCH v2 1/3] Multi-Culture support : Format fields as per locale            (Pooja Kulkarni)
 * [01a2645] Adding missing copyright in js and css files                                   (Daniel Henrique Barboza)
 * [e41cf6b] OVS Bridges front-end                                                          (sguimaraes943@gmail.com)
 * [7cda76b] Add unit for each sensor and add 0 when value is N/A                           (Ramon Medeiros)
 * [aaf6af1] Interfaces model: adding 'rdma_enabled' attribute                              (Daniel Henrique Barboza)
 * [ef30828] Remove any cherrypy configuration from gingerbase.conf file                    (Aline Manera)
 * [93dfd35] Remove cherrypy root configuration from gingerbase.conf file                   (Aline Manera)
 * [73e9822] Migration to Gingerbase netinfo: deleting model/netinfo.py                     (Daniel Henrique Barboza)
 * [2ccc41b] Migration to Gingerbase netinfo: test changes                                  (Daniel Henrique Barboza)
 * [393a75b] Migration to Gingerbase netinfo: in-code netinfo parameters                    (Daniel Henrique Barboza)
 * [62e16b1] Migration to Gingerbase netinfo: changing imports                              (Daniel Henrique Barboza)
 * [b84fa3d] Add wok-robot header to /sensors requests                                      (Aline Manera)
 * [9f6010f] Issue #317: removing 's390x' references from po files                          (Daniel Henrique Barboza)
 * [54efb97] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [18420a0] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [53cc370] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [d27149c] Issue #317: Ginger should NOT depend on Gingers390x.                           (Atreyee Mukhopadhyay)
 * [a4eb2b6] Fix paths and keep symbolic link when updating                                 (Ramon Medeiros)
 * [5c9e3f3] RDMA support for ConnectX-4 cards - UI                                         (peterpennings)
 * [aa7f346] Fix some PEP8 issues                                                           (Rodrigo Trujillo)
 * [c5eee8e] SR-IOV for ConnectX-4: adding script config calls in task                      (Daniel Henrique Barboza)
 * [278ebc5] tests/test_interfaces.py: script manipulation use cases                        (Daniel Henrique Barboza)
 * [4977446] SR-IOV for ConnectX-4: script managing functions                               (Daniel Henrique Barboza)
 * [cbc9247] Support non-ascii characters in nw_interfaces_utils by handling UTF-8 support. (Archana Singh)
 * [0434075] Support non-ascii characters in nw_cfginterfaces_utils by handling UTF-8 sup.. (Archana Singh)
 * [7bca153] Support non-ascii characters in network by handling UTF-8 support.             (Archana Singh)
 * [d33f6e3] Support non-ascii characters in netinfo by handling UTF-8 support.             (Archana Singh)
 * [6f03c8b] Support non-ascii characters in interfaces by handling UTF-8 support.          (Archana Singh)
 * [a7d9b57] Support non-ascii characters in cfginterfaces by handling UTF-8 support.       (Archana Singh)
 * [e093ca5] Issue #329 : Error message not getting displayed                               (Harshal Patil)
 * [f24f623] tests/test_interfaces.py: adapting to the API rename                           (Daniel Henrique Barboza)
 * [f7d9a59] SR-IOV for ConnectX-4: API change                                              (Daniel Henrique Barboza)
 * [d7827f8] tests/test_interfaces: asynchronous backend changes                            (Daniel Henrique Barboza)
 * [9c561da] SR-IOV for ConnectX-4: asynchronous backend                                    (Daniel Henrique Barboza)
 * [122d20f] Issue # 328 : Gateway field in Global Network configuration taking invalid v.. (Atreyee Mukhopadhyay)
 * [00a9f1a] Issue #323 Move gridfield titles, button labels and other messages to i18n     (Pooja Kulkarni)
 * [746a862] Issue #324 : In Storage section: Tape devices and SAN adapters are misaligned  (Nagamani Chennuboina)
 * [1f5e151] Fixing ui/css/ginger.css license mismatch after compiling it                   (Daniel Henrique Barboza)
 * [e7254fb] SR-IOV for ConnectX-4 pre-check: test changes                                  (Daniel Henrique Barboza)
 * [f69736c] SR-IOV for ConnectX-4 pre-check: model changes                                 (Daniel Henrique Barboza)
 * [bc17e6f] tests/test_backup.py: inserting task.wait() call                               (Daniel Henrique Barboza)
 * [d9a4ea8] Issue #326 : In Network tab, Mispelled message about DNS server change.        (Nagamani Chennuboina)
 * [728bfef] Issue #321 : Config backup timeout fix                                         (Harshal Patil)
 * [1220ea1] fix for issue #322                                                             (Suresh Babu Angadi)
 * [a22a666] UI changes to accomodate user profile change                                   (Harshal Patil)
 * [16b152b] Modified unit tests with mock module                                           (Suresh Babu Angadi)
 * [ebc3d05] Multiple fixes                                                                 (Suresh Babu Angadi)
 * [efc0f6b] test/test_cfginterfaces.py: new unit tests                                     (Daniel Henrique Barboza)
 * [9232806] model/nw_cfginterfaces_utils.py: create a new config file                      (Daniel Henrique Barboza)
 * [4579605] Only remove method from interfaces if index exists                             (Ramon Medeiros)
 * [913ee05] Removed Typeahead.js CSS from Ginger                                           (Samuel Guimarães)
 * [5be9712] Fixed Issue #312 Preserve the latest backups is not selectable.                (Rajat Gupta)
 * [4f17899] Issue # 315 : Storage Device listing shows "Not Record Found" till the time .. (Atreyee Mukhopadhyay)
 * [a6d43ba] Issue #296 Bad recovery for entry of a faulty DNS address                      (Jayavardhan Katta)
 * [b11de2c] Issue #310 : Large number of DASD format operations                            (Harshal Patil)
 * [63b3d5c] Fixing JS error in ui/js/util.js                                               (Daniel Henrique Barboza)
 * [cd1dfaf] Fixed issue #311 IPV6 fields UI Validation                                     (Nagamani Chennuboina)
 * [a5966b6] Fixed issue #309 configuration backup UI enhancement                           (Rajat Gupta)
 * [1871b8b] Issue #305 Interfaces with existing ethernet device cannot be created and er.. (Megha Smriti)
 * [ca8114e] Issue #303. Error thrown when an interface is deleted and the ifcfg file doe.. (Megha Smriti)
 * [d8c53fd] Services backend: test changes                                                 (Daniel Henrique Barboza)
 * [81eaffe] Services backend: model changes                                                (Daniel Henrique Barboza)
 * [b44b7a8] Services backend: ginger.py and control changes                                (Daniel Henrique Barboza)
 * [d6e6421] Services backend: i18n and docs/API.md changes                                 (Daniel Henrique Barboza)
 * [4586fcc] Issue #249 - Part 2 - Sorting on size gives incorrect results                  (Pooja Kulkarni)
 * [826a60f] Fixed tracking devices counter for storage devices                             (Rajat Gupta)
 * [4c0803c] Modified the unit testcases as per fine tuned code.                            (Megha Smriti)
 * [791c15a] Added cfginterfaces utils file as a part of networking fine tuned code.        (Megha Smriti)
 * [e9354b1] Added interfaces utils file as a part of networking fine tuned code.           (Megha Smriti)
 * [121b479] Networking Fine tuned code for interfaces.                                     (Megha Smriti)
 * [77d6289] Networking Fine tuned code for cfginterfaces.                                  (Megha Smriti)
 * [65d5b46] Modified netinfo and i18n.py as a part of fine tuned code.                     (Megha Smriti)
 * [e8aaa6f] ui/js/host-network-enable-sriov.js: code style fixes                           (Daniel Henrique Barboza)
 * [8a317a2] SR-IOV modal for mlx5-core interfaces                                          (peterpennings)
 * [214b723] Issue #249 Sorting on size gives incorrect results                             (Pooja Kulkarni)
 * [ac4991a] Added support for UTF-8 encoding in user management.                           (Archana Singh)
 * [708b018] Added support for UTF-8 encoding in storage devices.                           (Archana Singh)
 * [fde8194] Added support for UTF-8 encoding in dasd storage.                              (Archana Singh)
 * [8295336] Added support for UTF-8 encoding in backup configuration.                      (Archana Singh)
 * [a3453c4] Fixed Issue #235 ADMIN:Create Backup Panel will not work                       (Rajat Gupta)
 * [fc945a6] fix for issue #227 and #234                                                    (Suresh Babu Angadi)
 * [d8f33a6] Modifying error codes on model/interfaces.py                                   (Daniel Henrique Barboza)
 * [a649117] SR-IOV for mlx5 interfaces: test changes                                       (Daniel Henrique Barboza)
 * [0990297] SR-IOV for mlx5 interfaces: control and model changes                          (Daniel Henrique Barboza)
 * [197c927] SR-IOV for mlx5 interfaces: docs/api.md and i18n changes                       (Daniel Henrique Barboza)
 * [9399aa4] Adding 'module' into interfaces API: test changes                              (Daniel Henrique Barboza)
 * [036a8fe] Adding 'module' into interfaces API: model changes                             (Daniel Henrique Barboza)
 * [739834e] Adding 'module' into interfaces API: sysmodule changes                         (Daniel Henrique Barboza)
 * [f71b016] Adding 'module' into interfaces API: docs and control changes                  (Daniel Henrique Barboza)

#### [2.1.0] ####
 * [885ad6e] Github #260: packaging changes and wok version restiction                      (Daniel Henrique Barboza)
 * [b04ea6e] ChangeLog for 2.1.0 release                                                    (Daniel Henrique Barboza)
 * [79b48f8] po files update prior to 2.1 release                                           (Daniel Henrique Barboza)
 * [ab717b7] Fixing i18n.py and ui/pages/i18n.json.tmpl messages                            (Daniel Henrique Barboza)
 * [130e5c2] Fixed Issue #233 error message appears in closeable format                     (Rajat Gupta)
 * [2582b41] Issue # 230 and #231.                                                          (Megha Smriti)
 * [c09657e] Issue # 232 : In Storage tab the bottom lines are miss-aligned on each secti.. (Atreyee Mukhopadhyay)
 * [53575df] Fixed issues in VLAN and BOND creation                                         (Jayavardhan Katta)
 * [2b875a6] Fix for issue #215                                                             (Suresh Babu Angadi)
 * [ca9f1d8] Issue #102 Create partition fails with 500                                     (Harshal Patil)
 * [200898e] Issue #133 Delete physical volume fails with 500 status code                   (Pooja Kulkarni)
 * [618f7c1] Ginger Issue #113: Delete operation for /dasdpartitions fails with 500         (Pawan Kumar)
 * [539092c] Issue #140 : Create swap file fails                                            (Harshal Patil)
 * [fc38b7d] Improve user request log messages                                              (Lucio Correia)
 * [2ceb7b2] OVS backend: Avoid error message in WoK start                                  (Daniel Henrique Barboza)
 * [4bd5862] Issue #223: list isn't refreshing after unload                                 (Samuel Guimarães)
 * [873dec7] Issue #225 Storage devices listing API timesout if large number of FC device.. (Pooja Kulkarni)

#### [2.1.0-rc1] ####
 * [bd4ef81] Fix Ginger UI: SEP container is hidden after start service                     (Rodrigo Trujillo)
 * [cdd9b9e] Updated Ginger SCSS to import new Wok accordion mixin                          (Samuel Guimarães)
 * [18b4c61] OVS bridges backend: new tests file test_ovsbridges.py                         (Daniel Henrique Barboza)
 * [9b2ccf0] OVS bridges backend: new model/ovsbridges.py module                            (Daniel Henrique Barboza)
 * [1786406] OVS bridges backend: changes in controls, ginger.py and model/model.py         (Daniel Henrique Barboza)
 * [c628f04] OVS bridges backend: docs/API.md and i18n.py changes                           (Daniel Henrique Barboza)
 * [a66167d] Customize user request log messages                                            (Lucio Correia)
 * [476afc0] Adding svg files to ginger spec file                                           (Daniel Henrique Barboza)
 * [2b20636] Adding svg pictures to IBM blacklist                                           (Daniel Henrique Barboza)
 * [6a7cb11] Added Ginger new SVG logo for login page, footer and about window              (Samuel Guimarães)
 * [5d2f4cc] Github #224: adding all JS files in ui/js/Makefile.am                          (Daniel Henrique Barboza)
 * [f8c6071] Removing rstrip() calls just after strip()                                     (Daniel Henrique Barboza)
 * [5ce7c92] Fix PEP8 issues according to 1.5.7 version                                     (Aline Manera)
 * [a9bb201] Update pkg-version script to work with submodules                              (Aline Manera)
 * [0b6ddd2] Expose Ginger version on /config URI                                           (Aline Manera)
 * [a7e9aec] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [580cca5] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [26b1534] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [290e46c] Multiple UI Fixes                                                              (Jan Schneider)
 * [83779b9] Multiple UI Fixes                                                              (Suresh Babu Angadi)
 * [a67cccb] Multiple UI Fixes                                                              (Suresh Babu Angadi)
 * [ccefa8f] Multiple UI Fixes                                                              (Rajat Gupta)
 * [191602e] Multiple UI Fixes                                                              (Rajat Gupta)
 * [6144b1f] Multiple UI Fixes                                                              (Rajat Gupta)
 * [d629442] Copyright fixes for sysmodules UI files                                        (Daniel Henrique Barboza)
 * [9588c87] Sysmodules modal window and form validation v3                                 (Samuel Guimarães)
 * [f8b4ed7] Sysmodules (SR-IOV) details accordion v3                                       (Samuel Guimarães)
 * [755179c] Sysmodules (SRIOV) tab initial implementation v2                               (Andre Teodoro)
 * [45c29be] Implement locking for network functions                                        (Jayavardhan Katta)
 * [ce99c8c] Changes for ginger to fix the Issue# 28 in Wok.                                (Atreyee Mukhopadhyay)
 * [95e62d8] Add missing license header                                                     (Aline Manera)
 * [d1d7209] Use check-IBM-license-header.sh from Wok                                       (Aline Manera)
 * [bfb75ed] Fix PEP8 according to PEP8 1.5.7 version                                       (Aline Manera)
 * [9f8b9b9] Issue #217 Storage devices listing API timesout if large number of DASD devi.. (Pooja Kulkarni)
 * [3455e0e] Ginger Issue #216:Inconsistency in display of DASD and FCLUNS size.            (Pawan Kumar)
 * [69ec91b] Issue #209 GUI shows wrong units for swap devices                              (Harshal Patil)
 * [58e46ca] Issue #210 Multipath friendly names not showing correct number of paths        (Pooja Kulkarni)
 * [549aa2e] Issue #205 List storage device fails when FC devices are removed in multithr.. (Pooja Kulkarni)
 * [1100f06] Adjustments after issue #202 fix                                               (Daniel Henrique Barboza)
 * [b16b6cf] Wok failed to start due Ginger dependency on libvirt                           (Chandra Shekhar Reddy Potula)
 * [b638fb1] Help page content update to reflect the current UI pages                       (Chandra Shekhar Reddy Potula)
 * [465dc9a] Fix ginger issues as #67 #71 #139 #141 #163                                    (Megha Smriti)
 * [e68c0a0] Fix for issue #199                                                             (Suresh Babu Angadi)
 * [bc55068] Fix for issue #198                                                             (Suresh Babu Angadi)
 * [817a95c] vlan UI html changes to relax interface naming convention                      (Chandra Shekhar Reddy Potula)
 * [ce0bd02] vlan UI js changes to relax interface naming convention                        (Chandra Shekhar Reddy Potula)
 * [ab92d8b] Fixing vlan and bond issues in cfginterfaces                                   (Jayavardhan Katta)
 * [02272a8] IBM copyright changes across the board                                         (Daniel Henrique Barboza)
 * [20d4da8] Adding IBM license verification in check-local                                 (Daniel Henrique Barboza)
 * [07118b2] Address-List-Issues-In-Interface                                               (abhiramk)
 * [57287cb] test_physicalvol: fixing error messages match                                  (Daniel Henrique Barboza)
 * [f1d9245] Fix PEP8 issues according to PEP8 1.5.7 version                                (Aline Manera)
 * [515dd06] Require authentication to APIs which provide detailed system information       (Aline Manera)
 * [907eeb3] Add authorization tests to confirm Ginger continues working as expected with.. (Aline Manera)
 * [55e7ee1] Use UrlSubNode to enable resource authentication                               (Aline Manera)
 * [b27d560] Github #193: Modified the ipv4 and ipv6 code to accept valid values            (Megha Smriti)
 * [58470e6] Issue #161: Storage device listing buttons are always enabled                  (Jan Schneider)
 * [cbeb7e9] sysmodules backend: adding 'mlx4_core' alias                                   (Daniel Henrique Barboza)
 * [8851ca6] Makefile.am targets enhancements                                               (Daniel Henrique Barboza)
 * [d9a643b] Fix Issue #192                                                                 (Rajat Gupta)
 * [599a5e1] Updated API.md file to update the doc for the information for the URI /plugi.. (Megha Smriti)
 * [8ae7952] Unit tests: changing 'models' to 'model'                                       (Daniel Henrique Barboza)
 * [9c5ad57] Renaming 'models' to 'model': changes in Makefiles                             (Daniel Henrique Barboza)
 * [f96561a] Renaming 'models' directory to 'model'                                         (Daniel Henrique Barboza)
 * [2095409] Changes in RPM spec:                                                           (Daniel Henrique Barboza)
 * [9a2e3aa] Rename 'controls' to 'control' in Ginger files                                 (Daniel Henrique Barboza)
 * [8fde01e] Rename 'controls' dir to 'control'                                             (Daniel Henrique Barboza)
 * [529ac7a] Fix ginger issue #191. Clean routes.                                           (abhiramk)
 * [aff9ed2] Revert "Adding sub_nodes to __init__.py"                                       (Daniel Henrique Barboza)
 * [f4ebbc2] Fix ginger issue #108                                                          (abhiramk)
 * [cd36819] UI page new look for global network configuration                              (Chandra Shekhar Reddy Potula)
 * [9a2280f] Javascipt changes to global network configuration                              (Chandra Shekhar Reddy Potula)
 * [b582bd2] CSS code changes to global network configuration                               (Chandra Shekhar Reddy Potula)
 * [497352e] Code changes to global network configuration back end                          (Chandra Shekhar Reddy Potula)
 * [a85e2f6] Issue #162: Format DASD UI messages are corrected                              (Rajat Gupta)
 * [0c0c1d7] Issue #188: DASD format/remove fails with no reason specified.                 (Pawan Kumar)
 * [4c0b928] tests/test_partitions: test failing when real sdb1 mounted                     (Daniel Henrique Barboza)
 * [6c47159] Update API.md for interface API. Issue #69                                     (abhiramk)
 * [44b22d2] Fix bond and vlan creation issue                                               (abhiramk)
 * [80227f9] Fixing tests/test_cfginterfaces                                                (Daniel Henrique Barboza)
 * [3ac39d3] This patch addresses ginger issues #109 , #110 , #124, #126                    (Abhiram Kulkarni)
 * [15a70c8] Adding sub_nodes to __init__.py                                                (Daniel Henrique Barboza)
 * [59eda64] Update Ginger configuration according to recent changes on Wok                 (Aline Manera)
 * [4123f0e] Fix for ginger issue #70 with double quotes.                                   (Megha Smriti)
 * [06200b3] Bug fixing in the Network page (#159 and #179)                                 (Chandra Shekhar Reddy Potula)
 * [6b1267f] Fix for issue #180                                                             (Suresh Babu Angadi)
 * [ed6b494] Issue #23 : SAN Adapters Listing is not proper on UI                           (Harshal Patil)
 * [cfb2191] Fixes for modal network bond page                                              (Chandra Shekhar Reddy Potula)
 * [2a7120e] Fixes for modal network settings page                                          (Chandra Shekhar Reddy Potula)
 * [e8b0f42] Fixes for modal network vlan page                                              (Chandra Shekhar Reddy Potula)
 * [e2ce2e2] Fix Firmware Update arguments parsing.                                         (Paulo Vital)
 * [b579d7e] fix for Issue# 143                                                             (Rajat Gupta)
 * [ccb158d] Fixing test_firmwareprogress and copyrights                                    (Daniel Henrique Barboza)
 * [1087fc0] Update test_firmware.                                                          (Paulo Vital)
 * [11e37cd] Change Firmware Update command from PUT to POST                                (Paulo Vital)
 * [7cba67d] Fix serviceable package name                                                   (Jose Ricardo Ziviani)
 * [bb15e99] Fix for issue #169 in ginger plugin                                            (Megha Smriti)
 * [abd6652] Issue #185 VLAN interface UI issues                                            (Chandra Shekhar Reddy Potula)
 * [eb0ac3f] Fix ginger issue #144                                                          (abhiramk)
 * [f8dcc02] Issue #177 Incorrect multipath count for DASD devices                          (Harshal Patil)
 * [4556314] test_dasdpartitions: fixing import                                             (Daniel Henrique Barboza)
 * [c653c0d] Issue #101 GET /plugins/ginger/dasdpartitions/dasdi fails with 500             (Pooja Kulkarni)
 * [b88d114] Issue #164 Missing "device_name" in /filesystems                               (Pooja Kulkarni)
 * [6ec3963] Issue #178 Removing UUID from the tape device information affects the FCP ta.. (Pooja Kulkarni)
 * [2fb10e3] Fix error in wok_log.error() in models/users.py                                (Daniel Henrique Barboza)
 * [578cf61] Fixing i18n message of sysmodules                                              (Daniel Henrique Barboza)
 * [ab131f1] Issue #22 & #24 in ginger390x                                                  (Suresh Babu Angadi)
 * [3d629df] General unit test fixes in test_swap and test_firmwareprogress                 (Daniel Henrique Barboza)
 * [48dc3ed] Issue #171: NW UI: subchannels is not getting displayed in network setting p.. (Archana Singh)
 * [293b2df] Fixing issues with ginger - #82                                                (Jayavardhan Katta)
 * [415d60a] Prevent AsyncTask timeout error during FW Update.                              (Paulo Vital)
 * [c76f966] I18n changes and input field validation for bond                               (Atreyee Mukhopadhyay)
 * [5acd837] Issue# 157 : Hide settings, vlan and bond options on Ubuntu and SuSe           (Atreyee Mukhopadhyay)
 * [d43447e] Github #170: availability check of dasddevs API                                (Daniel Henrique Barboza)
 * [5401322] tests/test_sysmodules.py: additional tests                                     (Daniel Henrique Barboza)
 * [790da40] Github #137: model and API changes for sysmodule features                      (Daniel Henrique Barboza)
 * [0e6280a] Add FirmwareProgress UI                                                        (Paulo Vital)
 * [2f8f832] Github #168: wrong error code in lookup()                                      (Daniel Henrique Barboza)
 * [c0413ab] Fixing models.utils._pvdisplay_out() error codes                               (Daniel Henrique Barboza)
 * [b5b584b] Unit test changes for tests/test_physical_vol.py                               (Daniel Henrique Barboza)
 * [cbb2b2e] Github #133: fix status code and error message of remove_pv                    (Daniel Henrique Barboza)
 * [ab19f91] Issue #146 #147 #149 #151: configuration backup issues                         (Jose Ricardo Ziviani)
 * [48624eb] Issue #150: configuration backup records on click open and close multiple ti.. (Jose Ricardo Ziviani)
 * [86f2bc7] Issue #148: New Custom Backup allows blank data                                (Jose Ricardo Ziviani)
 * [bbc2c99] GET of interfaces to include inactibe Bond and Vlan interfaces                 (abhiramk)
 * [16bd192] Html page for Network UI VLAN page                                             (Chandra Shekhar Reddy Potula)
 * [75f8616] JS file changes for Networking UI VLAN page                                    (Chandra Shekhar Reddy Potula)
 * [9410d16] Html file changes for Network UI Bond page                                     (Atreyee Mukhopadhyay)
 * [abb244a] JS file changes for Network Bond UI page                                       (Atreyee Mukhopadhyay)
 * [bfb2e56] CSS changes for Network UI Bond page                                           (Atreyee Mukhopadhyay)
 * [4a78da4] makefile changes for network settings UI.                                      (Archana Singh)
 * [43b5450] i18n for network settings UI.                                                  (Archana Singh)
 * [3458198] html for network setting UI.                                                   (Archana Singh)
 * [b01365d] JS for network settings UI.                                                    (Archana Singh)
 * [37dd8aa] CSS for network settings UI.                                                   (Archana Singh)
 * [f6638f0] Fix for ginger issue #131                                                      (abhiramk)
 * [2322770] Fixing id of device element in ui/js/host-network.js                           (Daniel Henrique Barboza)
 * [3bbc785] Update API.md with user management information                                 (Jose Ricardo Ziviani)
 * [a60f426] Github #135: test cases in tests/test_swap.py                                  (Daniel Henrique Barboza)
 * [b9b61df] Github #135: Swap API return codes                                             (Daniel Henrique Barboza)
 * [9b77292] Fix ginger issues #42 , #109 , #110 , #111 and #112                            (abhiramk)
 * [686cecc] Fixing ginger issues #105 , #106 and #114                                      (Jayavardhan Katta)
 * [46ca1a3] Help page for storage tab for Ginger                                           (Chandra Shekhar Reddy Potula)
 * [8958a4e] Issue #115 : Few Links to the pages are missing under Storage Devices          (Chandra Shekhar Reddy Potula)
 * [86dd259] Issue #134: Missing group name lead to general error in ginger                 (Jose Ricardo Ziviani)
 * [e7da160] Adding CfginterfacesModel to the Capabilities API                              (Daniel Henrique Barboza)
 * [f0049d8] tests/test_ibmsep.py - Unit tests for IBM Sep models                           (Daniel Henrique Barboza)
 * [dd6dedb] models/sensors.py: adding 'hddtemp' as a prerequirement                        (Daniel Henrique Barboza)
 * [9473e0d] Unit test for Sensors model                                                    (Daniel Henrique Barboza)
 * [00fab54] Issue #120: Change Power Management Options does not work on a Power System    (Jose Ricardo Ziviani)
 * [94136cf] Issue #122: Cannot add a new user using Ginger interface                       (Jose Ricardo Ziviani)
 * [c4f43e8] Issue #100 : failed to comply with json schema for dasd device                 (Harshal Patil)
 * [93bdad4] Issue #98 : GET /plugins/ginger/stgdevs fails with 500                         (Harshal Patil)
 * [38c98ab] Fix python-ethtool repository and typos                                        (Lucio Correia)
 * [888cadf] Unit tests for models/backup.py models                                         (Daniel Henrique Barboza)
 * [91230a2] Github #119: adding sysmodules files to Makefile.am                            (Daniel Henrique Barboza)
 * [ff2238d] Adding unit tests for Firmware model                                           (Daniel Henrique Barboza)
 * [d9dd4a8] Unit tests for the PowerManagement model                                       (Daniel Henrique Barboza)
 * [0976922] SysModules backend: unit tests                                                 (Daniel Henrique Barboza)
 * [0c366fd] SysModules backend: model classes                                              (Daniel Henrique Barboza)
 * [d4e6a16] SysModules backend: control classes                                            (Daniel Henrique Barboza)
 * [79231fa] SysModules backend: docs/API.md and i18n changes                               (Daniel Henrique Barboza)
 * [58eb94f] Makefile.am: adding AUTOMAKE_OPTIONS=foreign                                   (Daniel Henrique Barboza)
 * [4802889] Issue #87 : GET operation /plugin/ginger/dasddevs/<bus id> fails with 500 st.. (Harshal Patil)
 * [b129721] Issue #90: GET on /plugins/ginger/filesystems/<mount point> fails with 500     (Ramon Medeiros)
 * [706f9e7] Update README.md                                                               (Paulo Vital)
 * [033077e] Moved README to docs dir and make it MK supported.                             (Paulo Vital)
 * [e0c20f5] Github issue #99                                                               (abhiramk)
 * [3ab2b94] Update README                                                                  (Lucio Correia)
 * [854ad28] ginger.spec.in: adding files using wildcard                                    (Daniel Henrique Barboza)
 * [bb1254d] Add FirmwareProgress unit test.                                                (Paulo Vital)
 * [2951678] Add FirmwareProgress classes.                                                  (Paulo Vital)
 * [9f951d3] Change to update firmware as AsyncTask.                                        (Paulo Vital)
 * [4c091c1] Fixing issues with cfginterfaces - #77 and #78                                 (Jayavardhan Katta)
 * [bbd4a37] Updating ginger.css                                                            (Daniel Henrique Barboza)
 * [dc60b46] Storage tab Implementation for Ginger plugin.                                  (Atreyee Mukhopadhyay)
 * [cd3b1e2] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [e5f1efe] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [e13565b] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [d37d8fa] Do not rely on python-pip to install build dependencies                        (Aline Manera)
 * [3872548] Keep one single CSS file per application                                       (Aline Manera)
 * [6c3b543] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [9223e41] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [188ce35] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [f3e95b2] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [7efe387] test_filesystems: using -F (force) option in create_file                       (Daniel Henrique Barboza)
 * [dd2ec19] Issue 88 : Missing unformatted DASD devices from storage API                   (Harshal Patil)
 * [3199b55] Issue #81: Failed to format a device/partition with type 'xfs'                 (Pooja Kulkarni)

#### [2.0.0] ####
 * [b738301] Updated ChangeLog for 2.0.0                                                    (Daniel Henrique Barboza)
 * [ee1f8cb] Issue 84: User Management UI issues                                            (samhenri)
 * [7c3938b] Fixed error messages not showing in Ginger                                     (samhenri)
 * [8bf94d7] Fixes after the CSS and media query commits                                    (Daniel Henrique Barboza)
 * [15eef0e] Adding Media Query support for Ginger                                          (samhenri)
 * [0cb33ae] Fixed minor CSS issues with Ginger                                             (samhenri)
 * [6f9ece8] Wraping things up for 2.0.0 release                                            (Daniel Henrique Barboza)
 * [58728b9] Issue 72 : listing of storage devices has missing parameters to remove the d.. (Harshal Patil)
 * [bab5ea8] Implementing common functionalities related to jquery bootgrid                 (Atreyee Mukhopadhyay)
 * [7fec65f] Fixing rpm generation after CSS changes                                        (Daniel Henrique Barboza)
 * [c57e033] Use correct gettext package for building                                       (Lucio Correia)
 * [ad27b40] Fixing issues with cfginterfaces                                               (Jayavardhan Katta)
 * [85d1933] Remove special character from host-admin.js to it be interpreted as ASCII Text (Aline Manera)
 * [cb73b40] Issue #53:Introduced macaddr and derive status value from operstate            (Jayavardhan Katta)
 * [c04a068] Issue #76 : Failed to create swap device using multipath and whole devices     (Pooja Kulkarni)
 * [9d23060] Fixed SCSS Makefile                                                            (samhenri)
 * [8bbb8cc] Adding Admin New Custom Backup history                                         (Andre Teodoro)
 * [94d0487] Upgrade Ginger objectstore schema.                                             (Paulo Vital)
 * [b485b2b] Use always flag as a fallback                                                  (Lucio Correia)
 * [de193ed] Issue #63 : Failed to create physical volumes using whole devices rather tha.. (Pooja Kulkarni)
 * [489856a] Issue #61: multipath device with filesystem issue                              (Pooja Kulkarni)
 * [8dbdf23] Fix DEB dependencies                                                           (Lucio Correia)
 * [d12d5fb] Fix issue #22 - Add workaround for libuser bug                                 (Lucio Correia)
 * [ce29993] Fixing unit tests after lsblk changes                                          (Daniel Henrique Barboza)
 * [f7f1e3a] Fixing broken packaging due to wrong variable                                  (Daniel Henrique Barboza)
 * [a145e82] Expose HTML tabs files in a specific /tabs URI                                 (Aline Manera)
 * [81e7009] Issue #57: Incorrect multipath device name being returned by list storage de.. (Pooja Kulkarni)
 * [6bfe40a] Make Ginger RPM noarch                                                         (Lucio Correia)
 * [b2f562f] Issue #56 : Rest API for storage devices fails on Ubuntu 14.04                 (Harshal Patil)
 * [6c6c4ef] Do not expose /images URI                                                      (Aline Manera)
 * [60a0e9f] Applying new ui to Admin New Custom Backup                                     (Andre Teodoro)
 * [ff08fc5] Issue #35                                                                      (Jayavardhan Katta)
 * [7771909] Github #48 and #50: unit tests changes                                         (Daniel Henrique Barboza)
 * [8d8e225] Adding data subdir to gitignore                                                (Daniel Henrique Barboza)
 * [bb6ac98] Github #22: adding workaround for libuser in README                            (Daniel Henrique Barboza)
 * [d1ca6e4] Issue 38 : Missing package dependencies in spec files                          (Chandra Shekhar Reddy Potula)
 * [fda7c49] Fixing minor issues at Admin Backup Batch Delete Modal                         (Andre Teodoro)
 * [5ccb24d] Applying new ui at Admin Backup Batch Delete Modal                             (Andre Teodoro)
 * [a69f344] Applying new ui at Admin User Management Modal                                 (Andre Teodoro)
 * [0167eb2] Applying new-ui at SEP Configuration Modal                                     (Andre Teodoro)
 * [ce48f7c] Applying new-ui at SEP Configuration Panel                                     (Andre Teodoro)
 * [80d6811] Applying new ui at Administration tab                                          (Andre Teodoro)
 * [bcc5447] Applying new-ui at SAN Adapters Admin panel                                    (Andre Teodoro)
 * [a20f619] Changing Collapse from Admin Screen to Bootstrap Accodion                      (Andre Teodoro)
 * [12db7c0] ipv4 and ipv6 routes support                                                   (abhiramk)
 * [8e2ab6f] Delete operation on interface of types "Bond" and "Vlan"                       (Jayavardhan Katta)
 * [4a802fb3] Added SCSS assets                                                              (samhenri)
 * [f5559e7] Fixing unused messages in i18n.py and models/utils.py                          (Daniel Henrique Barboza)
 * [6a75337] Listing available storage devices                                              (Pooja Kulkarni)
 * [721e79e] Test Cases for storage devices API                                             (Pooja Kulkarni)
 * [c18c610] Updated API doc for storage devices                                            (Pooja Kulkarni)
 * [0c7eaa9] Missing files from previous merges                                             (Daniel Henrique Barboza)
 * [55c7467] Ginger Task API: unit tests changes                                            (Daniel Henrique Barboza)
 * [cbb44ef] Ginger Task API: model changes                                                 (Daniel Henrique Barboza)
 * [0b236e0] Ginger task API: docs/API.md changes                                           (Daniel Henrique Barboza)
 * [d0889c8] Test Cases for Logical Volume support in Ginger                                (Pooja Kulkarni)
 * [20f21cd] Updated API doc for Logical Volumes support in Ginger                          (Pooja Kulkarni)
 * [521f7d8] Support for list, create and delete operations on Logical Volumes on the host  (Pooja Kulkarni)
 * [68387e0] Test cases for volume groups support in Ginger                                 (Pooja Kulkarni)
 * [10efe2f] Updated API doc for volume group support                                       (Pooja Kulkarni)
 * [f4d3e53] Support for list, create, modify and delete volume groups on host              (Pooja Kulkarni)
 * [72a0929] Test Cases for physical volumes support in Ginger                              (Pooja Kulkarni)
 * [52f26c1] Updated API doc for physical volume support                                    (Pooja Kulkarni)
 * [b539d4b] Support for list, create and remove physical volumes on host                   (Pooja Kulkarni)
 * [c86b80d] Test cases for disk partition support                                          (Pooja Kulkarni)
 * [84a46d7] Updated API doc for disk partition support                                     (Pooja Kulkarni)
 * [a634c24] Support for list, create and delete disk partitions on host                    (Pooja Kulkarni)
 * [5998c30] Create an interface of type "Vlan"                                             (Jayavardhan Katta)
 * [a768c05] Support DASD (ECKD) devices : Test Cases                                       (Pawan Kumar)
 * [0bb1507] Support DASD (ECKD) devices : Docs and base files                              (Pawan Kumar)
 * [1b90db5] Support DASD (ECKD) devices : Model files                                      (Pawan Kumar)
 * [8b9e9c7] Support DASD (ECKD) devices : Control files                                    (Pawan Kumar)
 * [a25622f] make check-local whiteline fixes                                               (Daniel Henrique Barboza)
 * [9d96ff0] Github #44: make check-local improvements                                      (Daniel Henrique Barboza)
 * [64e63bf] Remove obsolete message GINSP00018E                                            (Aline Manera)
 * [a5e6809] Remove obsolete message GINNET0030E                                            (Aline Manera)
 * [989b8f9] Adjust Ginger for the new navigation bar                                       (Aline Manera)
 * [5ba6aa0] API doc for POST action on collection - "cfginterfaces"                        (Jayavardhan Katta)
 * [d69effa] Create interface of type "Bond"                                                (Jayavardhan Katta)
 * [648366e] For RFC editing the interface with ipv6 configuration(PUT operation continued) (abhiramk)
 * [a0cc2a3] Fix Firmware level information of BMC-based machines.                          (Paulo Vital)
 * [3116152] pep8 fix in tests/test_filesystems.py                                          (Daniel Henrique Barboza)
 * [bf23bbd] Added testcases for NFS mount operation.                                       (Pooja Kulkarni)
 * [4a0f7b1] Modify API documentation to support NFS mount operation.                       (Pooja Kulkarni)
 * [a26b6b7] Extend filesystem code to support NFS mount.                                   (Pooja Kulkarni)
 * [bb4b6b3] Updated API documentation for swap device support                              (Harshal Patil)
 * [20058da] Test cases for swap device management in Ginger                                (Harshal Patil)
 * [44506c4] List/add/remove the swap devices used by the host                              (Harshal Patil)
 * [a0e6de0] Support PUT operation to edit the interface cfg files.                         (abhiramk)
 * [fe5f67c] Implementation of POST actions activate/deactivate on interfaces.              (Jayavardhan Katta)
 * [5d305f1] Github #36: cleaning up python augeas object                                   (Daniel Henrique Barboza)
 * [e7b1199] Missing filesystem files                                                       (Daniel Henrique Barboza)
 * [eedd813] Test cases for filesystem support                                              (Pooja Kulkarni)
 * [6f83c4f] Updating API docs for filesystem support                                       (Pooja Kulkarni)
 * [148aed9] Adding filesystem list/mount/unmount support to Ginger                         (Pooja Kulkarni)
 * [4905c34] Listing the information from ifcfg files                                       (abhiramk)
 * [4ff1320] Fixing Ginger tests after WoK                                                  (Daniel Henrique Barboza)
 * [ecc57a9] Fix for the issue #26 https://github.com/kimchi-project/ginger/issues/26       (abhiramk)
 * [84f36db] Update UI string related to FW update files.                                   (Paulo Vital)
 * [59db493] Add support to update Power FW using not only RPM files.                       (Paulo Vital)
 * [0810eac] Show 'progress' image while sensor monitor data is being retrieved             (Socorro Stoppler)
 * [f4827d4] pep8 fixes for models/users.py                                                 (Daniel Henrique Barboza)
 * [fd4be1f] Adding static UI files path in ginger.conf                                     (Daniel Henrique Barboza)
 * [e94735c] Wok updates                                                                    (Pooja)
 * [b0cc0fa] Adapt Ginger to use Wok - Webserver Originated from Kimchi                     (Lucio Correia)
 * [43b09f5] Fix user/groups id creation in user management                                 (Rodrigo Trujillo)
 * [147258c] Fix password encryption and salt generation                                    (Rodrigo Trujillo)
 * [f6b32ff] Add missing translations                                                       (Aline Manera)
 * [112b75e] Update missing translations                                                    (Ramon Medeiros)
 * [091323a] Add User panel to show correcly in all languages                               (Socorro Stoppler)
 * [bbb7752] Update help pages for ja_JP and zh_CN                                          (Aline Manera)
 * [56e96fd] Fix comment format on i18n.json                                                (Ramon Medeiros)
 * [6ff9be4] User model changes                                                             (Daniel Henrique Barboza)
 * [6aa05a7] Unit tests for user management                                                 (Daniel Henrique Barboza)
 * [27029a1] Fixing russian translation file                                                (Daniel Henrique Barboza)
 * [8e8e9fc] New translation files for Ginger                                               (Daniel Henrique Barboza)
 * [e02aac6] Help changes for ginger                                                        (Kersten)
 * [818c53a] Adding copyright disclaimer to files that didn't have.                         (Daniel Henrique Barboza)
 * [a074444] Fix Power Management availability for new tuned-adm versions                   (joserz@linux.vnet.ibm.com)
 * [dc1e37d] TRANSLATION: Add new languages and rebuild existent                            (Rodrigo Trujillo)
 * [26cf416] Translation: Change process - sort output and avoid fuzzy msgs                 (rodrigo.trujillo@linux.vnet.ibm.com)
 * [86c1d14] Improve SEP UI - multi subscription (FRONT-END)                                (rodrigo.trujillo@linux.vnet.ibm.com)
 * [a13a944] Improve SEP API - multi subscription (API.json/i18n.py)                        (rodrigo.trujillo@linux.vnet.ibm.com)
 * [b48aef6] Improve SEP API - multi subscription (control/model)                           (Ramon Medeiros)
 * [ebe1ca2] Add ppc64le support to Firmware is_feature_available()                         (christy@linux.vnet.ibm.com)
 * [d8bf0f1] Remove Kimchi LibvirtConnection dependency from network.py                     (rodrigo.trujillo@linux.vnet.ibm.com)
 * [779385b] Remove Kimchi LibvirtConnection dependency from interfaces.py                  (rodrigo.trujillo@linux.vnet.ibm.com)
 * [0459d44] Add html files and build-aux/compile to .gitignore list                        (rodrigo.trujillo@linux.vnet.ibm.com)
 * [5b8a541] Updating .po files                                                             (Daniel Henrique Barboza)
 * [ed405be] Changing ChangeLog generation                                                  (Daniel Henrique Barboza)

#### [1.3.0.1] ####
 * [3e69117] Github #9, #10 and #12 fixes                                                   (Daniel Henrique Barboza)
 * [9a5567a] i18n.py: deleting the merge with kimchi messages                               (Daniel Henrique Barboza)
 * [a8a6514] Enhancing Power Management error messages                                      (Daniel Henrique Barboza)
 * [8c5ea3a] ChangeLog file for Ginger                                                      (Daniel Henrique Barboza)
 * [4c81977] Make check fixes                                                               (Daniel Henrique Barboza)

#### [ginger-1.3.0] ####
 * [0e4806c] Debian/Ubuntu packaging files                                                  (Daniel Henrique Barboza)
 * [23ded96] README: adding Ubuntu/Debian info.                                             (Daniel Henrique Barboza)
 * [f0c3be7] models/ibm_sep.py: adding 'is_feature_available()' method                      (Daniel Henrique Barboza)
 * [c332517] models/interfaces.py: fixing an 'is not defined' error                         (Daniel Henrique Barboza)
 * [fd5c176] UI: Capabilities for ginger                                                    (wenwang@linux.vnet.ibm.com)
 * [b60e80a] Capabilities API: adding support to some existing models                       (Daniel Henrique Barboza)
 * [b911174] Adding capabilities API to Makefiles                                           (Daniel Henrique Barboza)
 * [6441dbf] Adding new API: Capabilities                                                   (Daniel Henrique Barboza)
 * [8aa841f] Fix delete user return error                                                   (Rodrigo Trujillo)
 * [e8453fc] Have Firmware inherit from Object                                              (christy@linux.vnet.ibm.com)
 * [b7589c6] Changing the network interfaces listing                                        (Daniel Henrique Barboza)
 * [a7f2e08] UI: Ginger User Management                                                     (Wen Wang)
 * [b76a7e2] models/interfaces.py: removing ip/netmask on blank input                       (danielhb@linux.vnet.ibm.com)
 * [1e1011f] Add Ginger Help files                                                          (Rodrigo Trujillo)

#### [ginger-1.2.1.1] ####
 * [a8bff3e] Packaging: Let Ginger Depend on Latest Kimchi                                  (Zhou Zheng Sheng)
 * [3345353] Deal with bad hdd sensor data                                                  (christy@linux.vnet.ibm.com)
 * [6eb90a5] Bugfix: Make buttons display properly when the text is long                    (Wen Wang)
 * [e7ed072] Enhancement: Change the SEP status style from text to a status dot             (Wen Wang)
 * [468149e] host-admin.js: disabling OK button when processing                             (danielhb@linux.vnet.ibm.com)
 * [daecbfc] Update Makefile.am to add autogen.sh in tarball.                               (Paulo Vital)
 * [3cc5181] Add timeout check for configuration backup                                     (Zhou Zheng Sheng)
 * [9a3b682] Bugfix Takes time to activate tuned profile in "Power Options"                 (Wen Wang)
 * [db95b9e] IBM SEP bug fix: Update _get_subscribe info                                    (Paulo Vital)
 * [eac260e] Bugfix: Change ginger's text for translation                                   (wenwang@linux.vnet.ibm.com)
 * [1e1905b] UI: SEP(ESA) initial setup                                                     (Wen Wang)
 * [b6f83bc] IBM Serviceable Event Provider (SEP): Update build files                       (Paulo Vital)
 * [c5869b6] IBM Serviceable Event Provider (SEP): Backend support                          (Paulo Vital)
 * [66db9fd] IBM Serviceable Event Provider (SEP): Update configuration files               (Paulo Vital)
 * [646a0c1] UI: Host sensors data visualization                                            (Wen Wang)
 * [ea67e95] 'tuned' troubleshot information in README file                                 (danielhb@linux.vnet.ibm.com)
 * [91ebfc3] Add sensors backend functionality                                              (christy@linux.vnet.ibm.com)
 * [9e5dccc] Fix pyflakes and pep 8 errors                                                  (Zhou Zheng Sheng)
 * [4fac9cc] Updated .gitignore to Address Generated Files                                  (hlwang@linux.vnet.ibm.com)
 * [5ce4a73] Adapt to new Kimchi authorization scheme                                       (Zhou Zheng Sheng)

#### [] ####
 * [e5b9422] Updating PO files                                                              (Daniel Henrique Barboza)
 * [503be72] Move System Modules to a sidebar entry                                         (Aline Manera)
 * [ffca4f7] Move Audit features to a sidebar entry                                         (Aline Manera)
 * [33a343c] Ginger sidebar                                                                 (Aline Manera)
 * [b3bb340] Fix expand/collpase widget configuration in Network tab                        (Aline Manera)
 * [aedb1e5] Updated PO files                                                               (Rajat Gupta)
 * [b3510f0] Fix mocking of test_get_list_of_audit_conf                                     (Lucio Correia)
 * [9551e0a] Skip tests that need sudo                                                      (Lucio Correia)
 * [744e29c] Fix and mock test_update for Audit rules                                       (Lucio Correia)
 * [044a8f4] Fix and improve test_get_list_of_pre_rules                                     (Lucio Correia)
 * [16b6a20] Adapt filesystem tests to also run without sudo permission                     (Lucio Correia)
 * [bcbd516] Bug fix #378: Change confirmation dialog of password mismatch in Add User wi.. (Bianca Carvalho)
 * [cb20d1a] Fixing copyright date after previous commits                                   (Daniel Henrique Barboza)
 * [f406292] Externalized active value in audit dispatcher details and list sections.       (Rajat Gupta)
 * [ff80f99] Fixed duplication of user list in user management user list                    (Rajat Gupta)
 * [f61d64d] Introducing Volume group action buttons                                        (Rajat Gupta)
 * [e89a82c] Added validation and fixed error message while adding swap device              (Rajat Gupta)
 * [c29973c] Fixed volume group listing will not refresh after extend/reduce volume         (Rajat Gupta)
 * [34e32f8] Fixed Apply button of audit config can be clicked when no changes was made t.. (Rajat Gupta)
 * [b5afa32] Issue #527.Adding /dev/dasd based swap device yields an error.                 (Megha Smriti)
 * [9560100] Fixing copyright date of UI files                                              (Daniel Henrique Barboza)
 * [68c6ecf] Changes to show translated value of rules types in rules listing and edit ru.. (Rajat Gupta)
 * [bc9b25d] Externalise Network on-off button for ipv4/ipv6 panels and Host Administrati.. (rajat gupta)
 * [7296802] Multi culture UI issues fixed                                                  (Rajat Gupta)
 * [6721ad8] Collapse all Network tab sections                                              (Aline Manera)
 * [f0f20b3] Issue #520. Auto refresh of ovsbridges.                                        (Megha Smriti)
 * [57b0e8f] Update run_server() calls to do not pass model instance                        (Aline Manera)
 * [b203d32] Fixing test_interfaces.py                                                      (Daniel Henrique Barboza)
 * [30e65e7] disable remove button for iscsi devices                                        (Suresh Babu Angadi)
 * [2536442] Fixing copyright of host-network-ovs.js and host-system-services.js            (Daniel Henrique Barboza)
 * [bbddec8] Fixed system service tab missed to list all active services                    (Rajat Gupta)
 * [186a740] Fixed ovs bond interface menu will not exit when save changes and close "Edi.. (Rajat Gupta)
 * [84872f7] Fix for issue #529 and #530                                                    (Suresh Babu Angadi)
 * [10be1fa] Adding self.depends in ginger root                                             (Daniel Henrique Barboza)
 * [f283380] Fixing copyright of ui/js/host-storage-vg.js                                   (Daniel Henrique Barboza)
 * [c2d2bd0] Fixed GINVG00001E and GINVG00009E error received while creating a new volume.. (Rajat Gupta)
 * [1cf1359] Fixed missing apply step when try to extend volume group                       (Rajat Gupta)
 * [ce2b385] Fixed window hangs at the 'loading' step when cancel the physical volume cre.. (Rajat Gupta)
 * [df814a0] Corrected wrong spelling of warning info while creating physical volume.       (Rajat Gupta)
 * [271a4d9] Fixed issue #521 Audit UI: Auditlog filters which doesn't require field valu.. (Rajat Gupta)
 * [c3ee2b0] Fix for refresh button will select all newly added file system automatically.  (Rajat Gupta)
 * [b27aba5] Fixed Audit Logs: unable to open the value input box for 'Event Start' and '.. (Rajat Gupta)
 * [93f4ebb] Fixing copyright date                                                          (Daniel Henrique Barboza)
 * [f43b9ca] Issue #531 Removed refresh of networkdevices on cancellation.                  (Megha Smriti)
 * [6fd2c63] Issue #525. Disabling Set OSA Port option for bond/vlan.                       (Megha Smriti)
 * [e73e078] Bug fix #528                                                                   (Megha Smriti)
 * [0711217] Remove role_key parameter                                                      (Aline Manera)
 * [f015905] Fixing copyright year of UI files after previous commit                        (Daniel Henrique Barboza)
 * [905d098] Bug fix #517: Restore system backup                                            (Bianca Carvalho)
 * [62f1414] Minor issue fixes in create partition                                          (Suresh Babu Angadi)
 * [9b75863] Fixing copyright year of storage_devs.py                                       (Daniel Henrique Barboza)
 * [a3b8cdb] Fix for ginger issue #526                                                      (Megha Smriti)
 * [d6c7a2f] Updating ginger.css with latest changes                                        (Daniel Henrique Barboza)
 * [efa56f9] Remove related functions to VGs Actions                                        (Ramon Medeiros)
 * [dab1560] Bug fix #149: No Option for LVM Logical Volumes                                (Ramon Medeiros)
 * [ad6b775] Fix for confirmation message for delete partition                              (Suresh Babu Angadi)
 * [b7f51b2] Fixing URI of Archives Resource in API.md                                      (Daniel Henrique Barboza)
 * [0c0e894] Bug fix #517: Restore system backup                                            (Bianca Carvalho)
 * [a3def78] Fixing copyright year after the previous commits                               (Daniel Henrique Barboza)
 * [b010d4e] Bug fix #469: Invalid argument when try to bring an interface up               (Ramon Medeiros)
 * [0267c99] Support Bond type for bonding interfaces                                       (Ramon Medeiros)
 * [385db34] Bug fix #390: Ubuntu-16.04: Make Network Configuration able to manage with /.. (Ramon Medeiros)
 * [cc04471] Fix for ginger issue #523                                                      (Megha Smriti)
 * [cb76be8] Fixing copyright year of host-network.js                                       (Daniel Henrique Barboza)
 * [1d39f18] Fix for ginger issue #520                                                      (Megha Smriti)
 * [292a33a] SR-IOV option not being shown                                                  (Daniel Henrique Barboza)
 * [1aba901] Add dependency on libuser to avoid bug                                         (Lucio Correia)
 * [0113c57] Fixed issue #513 wrong error info when creating a user                         (Rajat Gupta)
 * [15b15b3] Fix for ginger issue #518                                                      (Megha Smriti)
 * [ada4fbb] Fix for the ginger issue # 511                                                 (Jayavardhan Katta)
 * [a471a6f] Fix for Issue #512 - Create partition fails with 500 for iSCSI and FCP devices (Pooja Kulkarni)
 * [2252dc5] Fix for ginger issue #509 and #510                                             (Megha Smriti)
 * [b038f17] Fix for Issue #508 - NFS mounting automatically adds _netdev option even whe.. (Pooja Kulkarni)
 * [6fec087] Fix for Issue #499                                                             (Pooja Kulkarni)
 * [d3b8b63] Issue #504 - Removing missing package references from README.md                (Daniel Henrique Barboza)
 * [2a2c074] Bug fix #507: Reduce JS lines to be > 512 characters                           (Aline Manera)
 * [fc899a4] Fix for issue #506                                                             (Suresh Babu Angadi)
 * [6ae5c02] Fix for issue #486 - part 2                                                    (Suresh Babu Angadi)
 * [556484b] Fix for the ginger issue #505                                                  (Jayavardhan Katta)
 * [d688fea] Bug fix #428: wrong parameter in OperationFailed message                       (Daniel Henrique Barboza)
 * [9dad1e1] Use success message for success case                                           (Lucio Correia)
 * [a9db23f] Fix key error while translating error message                                  (Lucio Correia)
 * [8d3cc28] Bug fix #426: adding 'err' parameter in error handling function                (Daniel Henrique Barboza)
 * [52724eb] Bug fix #426: fixing 'join' call in services.py                                (Daniel Henrique Barboza)
 * [7e745ab] Removing the 'Server' UI tab from 'Host' super tab                             (Daniel Henrique Barboza)
 * [4afb0c7] Bug fix #498: Action buttons in Storage and Network tab not aligned properly   (Atreyee Mukhopadhyay)
 * [189d6a3] Globalization implementation for admin systemrule and iSCSI pages              (Rajat Gupta)
 * [6ab9335] Removing commented code from model/cfginterfaces.py                            (Daniel Henrique Barboza)
 * [173c975] Fixed ginger issue #497                                                        (Jayavardhan Katta)
 * [35458fc] Fix for Issue #489 Listing of partitions for a block device or during mount .. (Pooja Kulkarni)
 * [2cfcd9b] Fix for Multi-culture UI issues in Ginger plugin.                              (Nagamani Chennuboina)
 * [22a8cff] Removed console log messages from ginger util                                  (Rajat Gupta)
 * [fe72d6d] Fix for issue #486                                                             (Suresh Babu Angadi)
 * [2ae952a] Issue # 491: Usage icon is not displayed for File System and Swap Devices.     (Atreyee Mukhopadhyay)
 * [1a23ab8] Issue #492: Nfs server Ip field does not validate iPv4 address or hostname.    (Atreyee Mukhopadhyay)
 * [613c8ca] Issue #490 Partitions API should be called with device IDs for FC and iSCSI .. (Pooja Kulkarni)
 * [9872f17] Fix for ginger issue #487                                                      (Megha Smriti)
 * [f39a1b5] Issue #488: OVS Bridge Name allows special characters while creating Ovs bri.. (Atreyee Mukhopadhyay)
 * [05f5b73] Fix for issue #483                                                             (Suresh Babu Angadi)
 * [c50376b] Fix for ginger issue #480 and remove button in User management changed to red. (Megha Smriti)
 * [7d394c9] Fix for ginger issue #478                                                      (Megha Smriti)
 * [aa9e359] Fix for the issue #468                                                         (Jayavardhan Katta)
 * [37d2dbb] Bug fix #482: removing refreshSensors when leaving Admin tab                   (Daniel Henrique Barboza)
 * [c253544] Issue #481 :Audit rules details section in Administration is getting distort.. (Atreyee Mukhopadhyay)
 * [4c439e8] Fix for issue #475                                                             (Suresh Babu Angadi)
 * [c4f784c] Issue #476: Non formatted dasd devices are allowed for create partition.       (Atreyee Mukhopadhyay)
 * [0f7d7dd] Bug fix #473: Refresh on User Mgmt                                             (Prakash Ramasamy)
 * [5d033d0] Fix for issue #474                                                             (Suresh Babu Angadi)
 * [9bd1f63] Bug fix #396: Network Configuration - Add/Delete BOND interface errors         (Bianca Carvalho)
 * [abcc531] Update tests to new service list code                                          (Ramon Medeiros)
 * [deba849] Bug fix #414: service disapear after stopping it at opensuse 42.1              (Ramon Medeiros)
 * [e74295d] Fix for ginger issue #467                                                      (Megha Smriti)
 * [ffa1680] Issue # 472 : System Services Filter does not show messssage "No records fou.. (Atreyee Mukhopadhyay)
 * [39a0564] Fix for ginger issue #471                                                      (Megha Smriti)
 * [a1f202d] Fix for ginger issue #470                                                      (Megha Smriti)
 * [4834098] Fixing typo in GINAUD0031E message of i18n.py                                  (Daniel Henrique Barboza)
 * [21d48fa] Fix for ginger issue #461 #462                                                 (Megha Smriti)
 * [a44c9ea] Fix for issue #466                                                             (Suresh Babu Angadi)
 * [1e756db] Issue #465:UI validaiton missing for Audit rule creation/ modification.        (Atreyee Mukhopadhyay)
 * [5f8876b] Update Ginger code due chnages on Wok configuration parameters                 (Aline Manera)
 * [3ad0c11] Fixed issue #440 filter or messages are not visible while scrolling the serv.. (Rajat Gupta)
 * [cebb044] Issue #457 : Minor UI issues Related to "Audit Logs" section                   (Nagamani Chennuboina)
 * [3c3bcd4] Issue # 463 : UI issues for System Call rule.                                  (Atreyee)
 * [dba174e] Fix for issue #439                                                             (Suresh Babu Angadi)
 * [e145a84] Update po files with latest changes in System Modules                          (Daniel Henrique Barboza)
 * [07f46bb] Updated .po and .pot files                                                     (Pooja Kulkarni)
 * [1edb1f8] Externalize missed strings in Ginger                                           (Pooja Kulkarni)
 * [b8c669d] Update UI to list all modules available to be loaded                           (Ramon Medeiros)
 * [59d496b] Bug fix #406: Ginger should display only unloaded modules to be loaded         (Ramon Medeiros)
 * [ae2a8d5] Bug fix #452: Cannot enable/disable network interfaces                         (Bianca Carvalho)
 * [168c80e] Changing VERSION to 2.3.0                                                      (Daniel Henrique Barboza)
 * [156e1d6] Improve SystemID details in Volume Group                                       (Pooja Kulkarni)
 * [3672d0b] Fixed issue #459 iscsi settings update fails                                   (Rajat Gupta)
 * [a3633c4] Fixed issue #455 Validate IP address and add label for port no in iSCSI disc.. (Rajat Gupta)
 * [7447ed2] Issue # 458 : UI issues related to Volume group.                               (Atreyee Mukhopadhyay)
 * [1bb2ec5] Issue # 454: File system filter not working.                                   (Atreyee Mukhopadhyay)
 * [2cb67f9] Remove URI configuration from ginger.conf file                                 (Aline Manera)
 * [80e9cae] Issue #397 - Fedora 24: Network Configuration - Bring VLAN interface up        (Bianca Carvalho)
 * [93075c0] Wok issue #173: Set tab color on tab-ext.xml and update SCSS files             (Aline Manera)
 * [68ba86a] Wok issue #174: Let Wok create the whole navigation bar                        (Aline Manera)
 * [1346ba3] Issue # 447 : Validation failing for DNS field in Global Network Configurati.. (Atreyee Mukhopadhyay)
 * [1d9132c] Fix for multi-culture Audit UI issues                                          (Nagamani Chennuboina)
 * [ec67435] Introducing OSA port & Buffer count functionalities                            (Nagamani Chennuboina)
 * [6b6e217] Introducing OSA port & Buffer count functionalities                            (Nagamani Chennuboina)
 * [d8c1c95] Removing commented code in ui/js/host-network-vlan.js                          (Daniel Henrique Barboza)
 * [ba07e58] Issue #450 : Seperate the buttons from datatable configuration for Network C.. (Atreyee Mukhopadhyay)
 * [ce22a3d] Issue #448 iSCSI get operation on invalid IQN fails with 500                   (Pooja Kulkarni)
 * [0ed29c9] Improve error message propagation in Filesystems                               (Pooja Kulkarni)
 * [17dcadf] Modified the network code to support OPTIONS in ifcfg file.                    (Megha Smriti)
 * [bb77781] Changed 'volumn' to 'volume' in ui/pages/i18n.json.tmpl                        (Daniel Henrique Barboza)
 * [8b7f3ed] Changed message for delete partition if VG name exist                          (Rajat Gupta)
 * [4b857a1] Fixed Issue #449 Loading icon is always visible while creating partition       (Rajat Gupta)
 * [59b29e7] For FC and Iscsi devices while creating partition pass device ID as paramete.. (Rajat Gupta)
 * [0675a21] Iscsi action login and logout event register onselect event                    (Rajat Gupta)
 * [7e8a821] Fixed issue #446 iSCSI login action button is active for logged in device      (Rajat Gupta)
 * [e9712aa] Fixed Issue #444 : iSCSI Target Authentication config fails to update          (Rajat Gupta)
 * [af3d183] Fix for the size slider in storage devices.                                    (Prakash Ramasamy)
 * [8bd1e88] Check for file path for create swap API                                        (Pooja Kulkarni)
 * [bff791c] Issue #226: Show GiB instead of g for Volume Group sizes                       (Bianca Carvalho)
 * [2c74003] Issue #442 DASD create partition API does not give an error for more than 3 .. (Pooja Kulkarni)
 * [e15b831] test_rules.py: fixing repeated 'key' in dict                                   (Daniel Henrique Barboza)
 * [129ba8d] Fix for multi-culture UI issues                                                (Nagamani Chennuboina)
 * [c2d9ba6] Improving Swap Device Partition listing                                        (Nagamani Chennuboina)
 * [924b726] Issue # 437 :Volume Group list is not getting refreshed post deletion of vol.. (Atreyee Mukhopadhyay)
 * [aaf5535] tests/test_powermanagement.py: changes after model refactoring                 (Daniel Henrique Barboza)
 * [770564f] Powermanagement model refactoring                                              (Daniel Henrique Barboza)
 * [c2680c7] Github #434: Removing tuned.adm service dependency                             (Daniel Henrique Barboza)
 * [9a62259] Returning "rows_indexes" as part of ginger.listNetworkConfig object.           (Atreyee Mukhopadhyay)
 * [10b6cf3] Issue #414: service disapear after stopping it at opensuse 42.1                (Ramon Medeiros)
 * [47a842d] Fixed minor bugs and introduced minor enhancements for Audit rules             (Nagamani Chennuboina)
 * [57deb11] Fixed minor bugs and introduced minor enhancements for Audit rules             (Nagamani Chennuboina)
 * [b1e50c0] Fixed minor bugs and introduced minor enhancements for Audit rules             (Nagamani Chennuboina)
 * [ec29c8a] Change in name of rules and fixed minor issues.                                (Megha Smriti)
 * [0a6c1b3] UI changes for listing FRU devices for Platform Management                     (Yash)
 * [ebbf2b2] Updating po files                                                              (Daniel Henrique Barboza)
 * [30aaaac] Backend changes for listing FRU devices for Platform Management                (Shilpa Sudhakaran)
 * [6088bcf] Fixed URI for "Importing predefined Rules"                                     (Nagamani Chennuboina)
 * [79afabc] Introducing Audit dispatcher functionality.                                    (Atreyee Mukhopadhyay)
 * [0d5bf9a] Introducing Audit dispatcher functionality                                     (Atreyee Mukhopadhyay)
 * [4b02bb4] Introducing Audit Dispatcher functionality.                                    (Atreyee Mukhopadhyay)
 * [7016532] Introducing Audit Dispatcher functionality.                                    (Atreyee Mukhopadhyay)
 * [80e6e5a] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [63bb3a7] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [87be7fc] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [dd4e342] Introducing Audit Rule Functionalities                                         (Nagamani Chennuboina)
 * [cc9c4a8] Added UT for the backend code, API.doc and error messages in i18n.py file      (Jayavardhan Katta)
 * [e7055c1] Backend code implementation for audit dispatcher                               (Jayavardhan Katta)
 * [e7e7a66] Introducing Audit Log functionality.                                           (Atreyee Mukhopadhyay)
 * [e018270] Introducing Audit Log functionality                                            (Atreyee Mukhopadhyay)
 * [97f3651] Introducing Audit Log functionality.                                           (Atreyee Mukhopadhyay)
 * [09155be] Introducing Audit Log functionality.                                           (Atreyee Mukhopadhyay)
 * [7751ca8] UI changes of Update Functionality of Platform Management                      (Yash)
 * [d93506d] Fixing is_feature_available method of model/graph.py                           (Daniel Henrique Barboza)
 * [08bbee2] Issue # 61 :'Add Adapter' button missing in Host -> Network tab.               (Atreyee Mukhopadhyay)
 * [e10dcf9] Issue #412: python-pygraphviz not listed as dependency                         (Ramon Medeiros)
 * [31fe7ed] Fix build process                                                              (Aline Manera)
 * [16af49e] Fix make-rpm target                                                            (Aline Manera)
 * [f5a47c3] Issue #413: spec asks for python2-crypto on opensuse 42.1, which does not ex.. (Ramon Medeiros)
 * [c943211] Issue #433: refactor rpm building                                              (Ramon Medeiros)
 * [f5f371e] Moving Platform Management data to state_dir                                   (Daniel Henrique Barboza)
 * [79224cd] Github #407: hide 'Audit Rules' UI when auditctl isn't found                   (Daniel Henrique Barboza)
 * [98bd241] Issue #403 - Make system services UI more failproof                            (Lucio Correia)
 * [b359903] Makefile.am: CLEANFILES must clean pyc files                                   (Daniel Henrique Barboza)
 * [1bb4036] Issue#408:System Platform does not follow Wok style                            (Manjunath)
 * [1519b22] Issue #381: 'make clean' does not revert its changes from 'make rpm'           (Bianca Carvalho)
 * [0eab874] Fix PEP8 issues                                                                (Lucio Correia)
 * [0d89f4d] Issue # 430 :UI displays blank in 'Volume Group' list when checking more det.. (Atreyee Mukhopadhyay)
 * [0eaf985] Fixes on tests/test_graph.py:                                                  (Daniel Henrique Barboza)
 * [b4873ca] Issue #384 : Fixing the broken /ginger/stgdevs API                             (Pooja Kulkarni)
 * [5fc74b6] Issue #418 : Disable iscsi target discovery auth methods for individual IQNs   (Harshal Patil)
 * [e920f13] Issue #415 : Disable auth for iSCSI target and initiator selectively           (Harshal Patil)
 * [fac72e2] Added columns in detailed report for graph creation.                           (Megha Smriti)
 * [3b7eab8] Implemented audit graph backend.                                               (Jayavardhan Katta)
 * [89bf175] Issue #389 : iSCSI Auth model class loading fix                                (Harshal Patil)
 * [b06e89a] Changes for System Platform Management                                         (Manjunath)
 * [5db9f52] Update functionalities for Platform Management                                 (Yash)
 * [828954b] UT implemented for the new features implemented.                               (mesmriti)
 * [c3f2169] Audit graph backend implemetation.                                             (mesmriti)
 * [048ef9c] Audit predefined rules backend implementation.                                 (mesmriti)
 * [23d78a5] Updated docs and i18n.py for the new features implemented.                     (mesmriti)
 * [fc56acf] Backend code implemented to get list of system calls.                          (mesmriti)
 * [b5d336f] Audit report implementation from the backend.                                  (mesmriti)
 * [192c6e9] Audit log implementation from the backend.                                     (mesmriti)
 * [00c40c5] Audit conf implemented in the backend.                                         (mesmriti)
 * [253c8ee] Modified audit rules code for comments and added new features.                 (mesmriti)
 * [165f4d0] Issue #166 : nfs mount fails with 500                                          (Pooja Kulkarni)
 * [e9118a9] Backend Changes for Sensor Data Records for Platform Management                (Shilpa)
 * [c825d7a] Update usage of add_task() method.                                             (Paulo Vital)
 * [0b0c662] Handle exception for create dasd partition                                     (Pooja Kulkarni)
 * [7288959] Enable dasd partition to be used to create a PV                                (Pooja Kulkarni)
 * [ea19737] Issue #300: Redesign Network Configuration                                     (Samuel Guimarães)
 * [349c55b] Initial UI changes for platform management enhancements                        (Manjunath)
 * [ca5a774] Removing console.log calls from ui/js/host-storage-partition.js                (Daniel Henrique Barboza)
 * [112f8a8] Multiple iSCSI UI changes                                                      (Rajat Gupta)
 * [eee0293] Update package dependencies.                                                   (Paulo Vital)
 * [9f372c3] Back-end Changes for System Event Logs for Platform Management                 (Hari G M)
 * [9d22dd0] Multiple UI changes for Storage device partition module                        (Rajat Gupta)
 * [2133e84] Introducing audit functionality.                                               (Atreyee Mukhopadhyay)
 * [ca386fa] Fixing miscellaneous issue in file system and volume group.                    (Atreyee Mukhopadhyay)
 * [0018152] Github #27: remove the clutter from Ginger model.py                            (Daniel Henrique Barboza)
 * [5f90ddc] dasd_utils.py: fixing imports                                                  (Daniel Henrique Barboza)
 * [9bae072] test_storage_devs.py: import adjustments                                       (Daniel Henrique Barboza)
 * [6fad9be] Removing circular reference between utils and dasd_utils                       (Daniel Henrique Barboza)
 * [2b4f810] Initial Back-end changes for platform management enhancements                  (Hari G M)
 * [d0e2af2] Introducing iSCSI implementation for Storage devices                           (Rajat Gupta)
 * [afe3402] Issue #382: Add user access logs to iSCSI Auth                                 (Harshal Patil)
 * [c4e16d6] Issue #382: iSCSI target specific and global auth config                       (Harshal Patil)
 * [4b9924f] Issue #381: 'make clean' does not revert its changes from 'make rpm'           (Bianca Carvalho)
 * [6fec29c] Capabilities API: get current feature state                                    (Daniel Henrique Barboza)
 * [2b9565f] Make all is_feature_available methods static                                   (Daniel Henrique Barboza)
 * [317d4d7] Fixing miscellaneous issues in swap functionalities                            (Nagamani Chennuboina)
 * [6c73928] Fixing miscellaneous issues in swap functionalities                            (Nagamani Chennuboina)
 * [10af984] Add missing user request log messages                                          (Lucio Correia)
 * [762e2e9] Remove duplicated entry                                                        (Lucio Correia)
 * [4826f3b] Revert "Use past verbs and other log message improvements"                     (Lucio Correia)
 * [56b0aaa] Move audit error messages along to correct section                             (Lucio Correia)
 * [260e87b] Ginger control: import control classes using sub_node                          (Daniel Henrique Barboza)
 * [9bd9ee1] test/test_authorization.py: test changes after urlsubnode change               (Daniel Henrique Barboza)
 * [ba0c086] Removing control/nfsshares.py file                                             (Daniel Henrique Barboza)
 * [5affd69] Control classes: fixing @UrlSubNode calls                                      (Daniel Henrique Barboza)
 * [a1054c2] Issue #372 : Add support for target rescan                                     (Harshal Patil)
 * [0efe826] docs/API.md : adding configuration backup APIs                                 (Daniel Henrique Barboza)
 * [3fac3f0] docs/API.md: removing duplicated ibm_sep entry                                 (Daniel Henrique Barboza)
 * [3988eab] Introducing Volume Group related operations.                                   (Atreyee Mukhopadhyay)
 * [6df0850] Introducing Volume group related operations.                                   (Atreyee Mukhopadhyay)
 * [17cca53] Introducing Volume group related operations.                                   (Atreyee Mukhopadhyay)
 * [597159e] Update stringutils imports                                                     (Lucio Correia)
 * [fb9b53d] Issue #377 : Full Width and Arabic digits not accepted for batch delete of c.. (Pooja Kulkarni)
 * [e4beb6d] Revert "Globalisation support - externalize all remaining strings for ginger.. (Daniel Henrique Barboza)
 * [3b3a91b] Issue #372 : Add support to target authentication                              (Harshal Patil)
 * [7a762e6] Globalisation support - externalize all remaining strings for ginger plugin.   (Pooja Kulkarni)
 * [e79ead0] Modify the info returned by partitions listing API                             (Pooja Kulkarni)
 * [9dbae80] Issue #375 :Fifteen Character VLAN device name not being recognized as a val.. (Atreyee Mukhopadhyay)
 * [85317f0] Issue #376:Unable to edit the text field or click submit/cancel after press .. (Atreyee Mukhopadhyay)
 * [74182c9] Time out while generating config back up file leave the tar file behind        (Bianca Carvalho)
 * [9439806] Issue #372 : iSCSI Discovery and IQN actions support                           (Harshal Patil)
 * [a84c1c5] Audit rules backend: new tests file test_rules                                 (Megha Smriti)
 * [617cf53] Audit rules backend: changes in controls, ginger.py and model/model.py         (Megha Smriti)
 * [bbeea7b] Audit rules backend: API doc and i18n.py changes.                              (Megha Smriti)
 * [ebce57e] Audit rules backend: new model/rules.py module                                 (Megha Smriti)
 * [a1e3df9] Introducing File system related operations.                                    (Atreyee Mukhopadhyay)
 * [26e0858] Introducing File system related operations.                                    (Atreyee Mukhopadhyay)
 * [f93c2f6] Introducing File system related operations.                                    (Atreyee Mukhopadhyay)
 * [b85b15f] Extend Filesystem mounting to include mount options                            (Pooja Kulkarni)
 * [4de6c14] Added cursor for tasks in progress                                             (Samuel Guimarães)
 * [e3d5254] Improvements on Configuration Backup UI                                        (peterpennings)
 * [670fdf8] Github #94: OpenSUSE network support                                           (Daniel Henrique Barboza)
 * [ba7623c] Implementation of Partition for storage devices                                (Rajat Gupta)
 * [97f0d08] Issue #371 : Create disk partitions takes integer input for size               (Pooja Kulkarni)
 * [4c1f481] Github #121: WoK log flooded by hddtemp messages                               (Daniel Henrique Barboza)
 * [84f43d5] Issue #300 : Redesign "Network Configuration" UI                               (Nagamani Chennuboina)
 * [4cb9b33] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [6811742] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [aea7709] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [32f2841] Fixing wok_log redundancy and i18n.py error messages                           (Daniel Henrique Barboza)
 * [930c71d] Issue #299: Redesign "Global Network Configuration" UI                         (Samuel Guimarães)
 * [3529cd9] Removing debug info from model/users.py                                        (Daniel Henrique Barboza)
 * [35b6160] Github #222: do not allow reload of modules                                    (Daniel Henrique Barboza)
 * [bec075c] ginger.spec.in: rpmlint fixes                                                  (Daniel Henrique Barboza)
 * [d7f4833] Github #195 - adding %dir directives in ginger.spec.in                         (Daniel Henrique Barboza)
 * [707669b] Issue 341: Add scrollbar to Sysmodules and System Services                     (Samuel Guimarães)
 * [af75818] tests/test_backup.py: adding new unit test                                     (Daniel Henrique Barboza)
 * [cee16d5] Removing the config files (using command line) not reflecting in the UI        (Bianca Carvalho)
 * [9c652ea] Github #31: make check now runs the unit tests                                 (Daniel Henrique Barboza)
 * [82d17ad] Redesign Volume Group UI                                                       (peterpennings)
 * [c5f3193] Redesign SAN Adapters UI                                                       (peterpennings)
 * [415b8cb] Show wok error message if firmware update fails                                (Lucio Correia)
 * [f3843e8] Reenable firmware package path field after task is finished                    (Lucio Correia)
 * [44b08f1] pep8 fix on model/firmware.py                                                  (Daniel Henrique Barboza)
 * [0a7c000] Update firmware upgrade tests to use single async task                         (Lucio Correia)
 * [09104e5] Update firmware upgrade UI to use single async task                            (Lucio Correia)
 * [44b6494] Fix firmware commit and reject operations                                      (Lucio Correia)
 * [fd9be7d] Use single async task for firmware upgrade                                     (Lucio Correia)
 * [421c2fc] Add the ability to disable SR-IOV                                              (Socorro Stoppler)
 * [b9ecdc1] Issue #367 : VG Name only seen when a particular partition is looked up        (Pooja Kulkarni)
 * [06c7e4a] Implementing listing of NFS shares for specified server                        (Pooja Kulkarni)
 * [63d4fe4] Implementing listing of NFS shares for specified server                        (Pooja Kulkarni)
 * [6f71dea] Implementing listing of NFS shares for specified server                        (Pooja Kulkarni)
 * [2ef3394] Issue #348. Activation of physical device and BOND/VLAN.                       (Megha Smriti)
 * [342059d] Make sure all log messages have required parameters                            (Lucio Correia)
 * [da9daca] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [b7435ca] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [3135796] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [bfb088c] Implementing Swap functionalities                                              (Nagamani Chennuboina)
 * [a8175f7] Password Change feature for Users                                              (Suresh Babu Angadi)
 * [5216c8b] Password Change feature for Users                                              (Suresh Babu Angadi)
 * [ff11621] Password Change feature for Users                                              (Suresh Babu Angadi)
 * [2bf9e05] ChangeLog and Version update to 2.2                                            (Daniel Henrique Barboza)
 * [02ca226] Updating translation files                                                     (Daniel Henrique Barboza)
 * [46a9be2] Remomving break-lines from i18n.py                                             (Daniel Henrique Barboza)
 * [079d825] Issue #320: Redesign 'Sensor Monitor' UI                                       (Samuel Guimarães)
 * [63b5258] Issue #366 : Filtering on partitions needs to be improved to match exact dev.. (Pooja Kulkarni)
 * [b7ac4fd] Issue #360: Refreshing volume groups keeps on loading                          (Samuel Guimarães)
 * [54a215c] Fixed Issue #363 - Issue while updating MTU in network interface file          (Rajat Gupta)
 * [da19756] Fixed Issue #362 - NW operation failed for cfginterface with "BOOTPROTO":"au.. (Rajat Gupta)
 * [4a0548c] Issue #364 : No need to show 'tmpfs' type in filesystem listing                (Pooja Kulkarni)
 * [8d10aae] test_interfaces.py: adding tests to VF = 0 scenario                            (Daniel Henrique Barboza)
 * [d705dda] SR-IOV for ConnectX-4: 0 (zero) VF setup changes                               (Daniel Henrique Barboza)
 * [d911bd0] Disable CX4 SR-IOV setup when selecting a VF                                   (Daniel Henrique Barboza)
 * [4661157] Adding nic_type to interfaces: UI changes                                      (Daniel Henrique Barboza)
 * [4c2633d] Adding nic_type to interfaces: control and model changes                       (Daniel Henrique Barboza)
 * [76ff07c] Adding nic_type to interfaces: doc changes                                     (Daniel Henrique Barboza)
 * [8106721] Issue #355 : Fix for partition listing API taking long time                    (Pooja Kulkarni)
 * [2e2e2c0] Issue #361 : Delete operation on swap file does not remove the file            (Pooja Kulkarni)
 * [21860c6] Include VG name in partitions details                                          (Pooja Kulkarni)
 * [36c645f] model/services.py: fixing cgroup parsing                                       (Daniel Henrique Barboza)
 * [942c147] model/services.py: adding docstrings and pylint fixes                          (Daniel Henrique Barboza)
 * [6e5c7ba] Fix sensor unit verification                                                   (Ramon Medeiros)
 * [2a67946] Issue #349 : Replace converters to use locale converters defined in wok        (Pooja Kulkarni)
 * [c769b5a] Issue #357 - Listing of PVs shows size in different units                      (Pooja Kulkarni)
 * [00dd2d8] model/sanadapters.py: adding docstring and pylint fixes                        (Daniel Henrique Barboza)
 * [5e6b353] Add 'port_type' to sanadapters API: UI changes                                 (Daniel Henrique Barboza)
 * [c3f9962] Add 'port_type' to sanadapters API: model changes                              (Daniel Henrique Barboza)
 * [a10909a] Add 'port_type' to sanadapters API: docs/API.md changes                        (Daniel Henrique Barboza)
 * [efa0d6e] Substitute quotes by apostrophe in configuration file                          (Rodrigo Trujillo)
 * [6929a57] ui/pages/Makefile.am: adding wildcard to add .tmpl files                       (Daniel Henrique Barboza)
 * [13db946] Issue# 342 : Sysmodules HYGIENE Unload of a kernel module is not persistent .. (Atreyee Mukhopadhyay)
 * [cbf6620] Issue #125: Delete volumegroup fails with 500                                  (Harshal Patil)
 * [c022260] Issue #334: Ginger spec file is restarting Wokd service twice                  (Ramon Medeiros)
 * [2fbae22] Show error message when update_flash fails.                                    (Paulo Vital)
 * [160610e] Fix UI notification of Firmware Update.                                        (Paulo Vital)
 * [6fcfd84] Fix overwrite-perm processing in Firmware Update                               (Paulo Vital)
 * [49798b5] model/interfaces.py: mlx5_core driver SR-IOV delay workaround                  (Daniel Henrique Barboza)
 * [57fb193] SR-IOV fixes after hardware testing: unit test changes                         (Daniel Henrique Barboza)
 * [d764c9a] SR-IOV fixes after hardware testing - nw_interfaces_utils.py                   (Daniel Henrique Barboza)
 * [864c3a5] SR-IOV fixes after hardware testing - model/interfaces.py                      (Daniel Henrique Barboza)
 * [45d74bc] Issue #129 : Reduce Volume Group fails with 500 status code.                   (Harshal Patil)
 * [0fff82d] Edit interface mac address: UI changes                                         (Daniel Henrique Barboza)
 * [a45efa7] Edit interface mac address: test changes                                       (Daniel Henrique Barboza)
 * [0fa01af] Edit interface mac address: doc and model changes                              (Daniel Henrique Barboza)
 * [0d88b97] Issue #128 : PVs part of existing VGs should not be allowed to be extended i.. (Harshal Patil)
 * [27ad7d0] Externalised strings and updated .pot and *.po files                           (Pooja Kulkarni)
 * [db2ee78] fix for issue #340                                                             (Suresh Babu Angadi)
 * [3c9c241] Issue #325 : vgdisplay api failed on ubuntu                                    (Harshal Patil)
 * [e28daf4] Issue #325 : Test cases for lvm version code                                   (Harshal Patil)
 * [02ff4eb] Ginger issue #336, raise ValueError if type is not bonding or vlan             (Jayavardhan Katta)
 * [72a033a] Changing is_feature_enabled of OVSBridgesModel                                 (Daniel Henrique Barboza)
 * [f879f46] SR-IOV enablement for mellanox connectx4 card                                  (peterpennings)
 * [202571c] Update sensors tests                                                           (Ramon Medeiros)
 * [264ebd3] Issue #320: Redesign "Sensor Monitor" UI                                       (Ramon Medeiros)
 * [541b771] Issue #304. Check for carrier value of each interface after activation         (Megha Smriti)
 * [b6f941c] Keeping 'Add User' panel in sync with users listing                            (Suresh Babu Angadi)
 * [7865c13] fix for issue #338                                                             (Suresh Babu Angadi)
 * [310abf9] Use past verbs and other log message improvements                              (Lucio Correia)
 * [ad32f97] Translate user request log messages                                            (Lucio Correia)
 * [5543aab] Issue # 335 : Settings page not opening for 'bonding'                          (Atreyee Mukhopadhyay)
 * [7328bfb] Removed the libvirt from contrib, docs, spec and UI help pages                 (Jayavardhan Katta)
 * [9430c8c] Removed the dependency of libvirt from network.py                              (Jayavardhan Katta)
 * [12169a1] Fix provided to assign variables based on distribution                         (Jayavardhan Katta)
 * [337bf95] Removed the dependency of libvirt from interfaces.py and removed correspondi.. (Jayavardhan Katta)
 * [bfe7d54] Make get_fc_path_elements arch-independent                                     (Lucio Correia)
 * [a225e35] Fixed issue #333 : Network Configuration BootGrid listing is not showing pro.. (Rajat Gupta)
 * [73f3354] System Services front-end                                                      (Samuel Guimarães)
 * [95b02a2] Multi-Culture support : Format storage related fields as per user locale       (Pooja Kulkarni)
 * [6bca555] Multi-Culture support : Format datetime in configuration backup as per user .. (Pooja Kulkarni)
 * [c076230] ][PATCH v2 1/3] Multi-Culture support : Format fields as per locale            (Pooja Kulkarni)
 * [01a2645] Adding missing copyright in js and css files                                   (Daniel Henrique Barboza)
 * [e41cf6b] OVS Bridges front-end                                                          (sguimaraes943@gmail.com)
 * [7cda76b] Add unit for each sensor and add 0 when value is N/A                           (Ramon Medeiros)
 * [aaf6af1] Interfaces model: adding 'rdma_enabled' attribute                              (Daniel Henrique Barboza)
 * [ef30828] Remove any cherrypy configuration from gingerbase.conf file                    (Aline Manera)
 * [93dfd35] Remove cherrypy root configuration from gingerbase.conf file                   (Aline Manera)
 * [73e9822] Migration to Gingerbase netinfo: deleting model/netinfo.py                     (Daniel Henrique Barboza)
 * [2ccc41b] Migration to Gingerbase netinfo: test changes                                  (Daniel Henrique Barboza)
 * [393a75b] Migration to Gingerbase netinfo: in-code netinfo parameters                    (Daniel Henrique Barboza)
 * [62e16b1] Migration to Gingerbase netinfo: changing imports                              (Daniel Henrique Barboza)
 * [b84fa3d] Add wok-robot header to /sensors requests                                      (Aline Manera)
 * [9f6010f] Issue #317: removing 's390x' references from po files                          (Daniel Henrique Barboza)
 * [54efb97] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [18420a0] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [53cc370] Issue #317: Ginger should NOT depend on Gingers390x                            (Atreyee Mukhopadhyay)
 * [d27149c] Issue #317: Ginger should NOT depend on Gingers390x.                           (Atreyee Mukhopadhyay)
 * [a4eb2b6] Fix paths and keep symbolic link when updating                                 (Ramon Medeiros)
 * [5c9e3f3] RDMA support for ConnectX-4 cards - UI                                         (peterpennings)
 * [aa7f346] Fix some PEP8 issues                                                           (Rodrigo Trujillo)
 * [c5eee8e] SR-IOV for ConnectX-4: adding script config calls in task                      (Daniel Henrique Barboza)
 * [278ebc5] tests/test_interfaces.py: script manipulation use cases                        (Daniel Henrique Barboza)
 * [4977446] SR-IOV for ConnectX-4: script managing functions                               (Daniel Henrique Barboza)
 * [cbc9247] Support non-ascii characters in nw_interfaces_utils by handling UTF-8 support. (Archana Singh)
 * [0434075] Support non-ascii characters in nw_cfginterfaces_utils by handling UTF-8 sup.. (Archana Singh)
 * [7bca153] Support non-ascii characters in network by handling UTF-8 support.             (Archana Singh)
 * [d33f6e3] Support non-ascii characters in netinfo by handling UTF-8 support.             (Archana Singh)
 * [6f03c8b] Support non-ascii characters in interfaces by handling UTF-8 support.          (Archana Singh)
 * [a7d9b57] Support non-ascii characters in cfginterfaces by handling UTF-8 support.       (Archana Singh)
 * [e093ca5] Issue #329 : Error message not getting displayed                               (Harshal Patil)
 * [f24f623] tests/test_interfaces.py: adapting to the API rename                           (Daniel Henrique Barboza)
 * [f7d9a59] SR-IOV for ConnectX-4: API change                                              (Daniel Henrique Barboza)
 * [d7827f8] tests/test_interfaces: asynchronous backend changes                            (Daniel Henrique Barboza)
 * [9c561da] SR-IOV for ConnectX-4: asynchronous backend                                    (Daniel Henrique Barboza)
 * [122d20f] Issue # 328 : Gateway field in Global Network configuration taking invalid v.. (Atreyee Mukhopadhyay)
 * [00a9f1a] Issue #323 Move gridfield titles, button labels and other messages to i18n     (Pooja Kulkarni)
 * [746a862] Issue #324 : In Storage section: Tape devices and SAN adapters are misaligned  (Nagamani Chennuboina)
 * [1f5e151] Fixing ui/css/ginger.css license mismatch after compiling it                   (Daniel Henrique Barboza)
 * [e7254fb] SR-IOV for ConnectX-4 pre-check: test changes                                  (Daniel Henrique Barboza)
 * [f69736c] SR-IOV for ConnectX-4 pre-check: model changes                                 (Daniel Henrique Barboza)
 * [bc17e6f] tests/test_backup.py: inserting task.wait() call                               (Daniel Henrique Barboza)
 * [d9a4ea8] Issue #326 : In Network tab, Mispelled message about DNS server change.        (Nagamani Chennuboina)
 * [728bfef] Issue #321 : Config backup timeout fix                                         (Harshal Patil)
 * [1220ea1] fix for issue #322                                                             (Suresh Babu Angadi)
 * [a22a666] UI changes to accomodate user profile change                                   (Harshal Patil)
 * [16b152b] Modified unit tests with mock module                                           (Suresh Babu Angadi)
 * [ebc3d05] Multiple fixes                                                                 (Suresh Babu Angadi)
 * [efc0f6b] test/test_cfginterfaces.py: new unit tests                                     (Daniel Henrique Barboza)
 * [9232806] model/nw_cfginterfaces_utils.py: create a new config file                      (Daniel Henrique Barboza)
 * [4579605] Only remove method from interfaces if index exists                             (Ramon Medeiros)
 * [913ee05] Removed Typeahead.js CSS from Ginger                                           (Samuel Guimarães)
 * [5be9712] Fixed Issue #312 Preserve the latest backups is not selectable.                (Rajat Gupta)
 * [4f17899] Issue # 315 : Storage Device listing shows "Not Record Found" till the time .. (Atreyee Mukhopadhyay)
 * [a6d43ba] Issue #296 Bad recovery for entry of a faulty DNS address                      (Jayavardhan Katta)
 * [b11de2c] Issue #310 : Large number of DASD format operations                            (Harshal Patil)
 * [63b3d5c] Fixing JS error in ui/js/util.js                                               (Daniel Henrique Barboza)
 * [cd1dfaf] Fixed issue #311 IPV6 fields UI Validation                                     (Nagamani Chennuboina)
 * [a5966b6] Fixed issue #309 configuration backup UI enhancement                           (Rajat Gupta)
 * [1871b8b] Issue #305 Interfaces with existing ethernet device cannot be created and er.. (Megha Smriti)
 * [ca8114e] Issue #303. Error thrown when an interface is deleted and the ifcfg file doe.. (Megha Smriti)
 * [d8c53fd] Services backend: test changes                                                 (Daniel Henrique Barboza)
 * [81eaffe] Services backend: model changes                                                (Daniel Henrique Barboza)
 * [b44b7a8] Services backend: ginger.py and control changes                                (Daniel Henrique Barboza)
 * [d6e6421] Services backend: i18n and docs/API.md changes                                 (Daniel Henrique Barboza)
 * [4586fcc] Issue #249 - Part 2 - Sorting on size gives incorrect results                  (Pooja Kulkarni)
 * [826a60f] Fixed tracking devices counter for storage devices                             (Rajat Gupta)
 * [4c0803c] Modified the unit testcases as per fine tuned code.                            (Megha Smriti)
 * [791c15a] Added cfginterfaces utils file as a part of networking fine tuned code.        (Megha Smriti)
 * [e9354b1] Added interfaces utils file as a part of networking fine tuned code.           (Megha Smriti)
 * [121b479] Networking Fine tuned code for interfaces.                                     (Megha Smriti)
 * [77d6289] Networking Fine tuned code for cfginterfaces.                                  (Megha Smriti)
 * [65d5b46] Modified netinfo and i18n.py as a part of fine tuned code.                     (Megha Smriti)
 * [e8aaa6f] ui/js/host-network-enable-sriov.js: code style fixes                           (Daniel Henrique Barboza)
 * [8a317a2] SR-IOV modal for mlx5-core interfaces                                          (peterpennings)
 * [214b723] Issue #249 Sorting on size gives incorrect results                             (Pooja Kulkarni)
 * [ac4991a] Added support for UTF-8 encoding in user management.                           (Archana Singh)
 * [708b018] Added support for UTF-8 encoding in storage devices.                           (Archana Singh)
 * [fde8194] Added support for UTF-8 encoding in dasd storage.                              (Archana Singh)
 * [8295336] Added support for UTF-8 encoding in backup configuration.                      (Archana Singh)
 * [a3453c4] Fixed Issue #235 ADMIN:Create Backup Panel will not work                       (Rajat Gupta)
 * [fc945a6] fix for issue #227 and #234                                                    (Suresh Babu Angadi)
 * [d8f33a6] Modifying error codes on model/interfaces.py                                   (Daniel Henrique Barboza)
 * [a649117] SR-IOV for mlx5 interfaces: test changes                                       (Daniel Henrique Barboza)
 * [0990297] SR-IOV for mlx5 interfaces: control and model changes                          (Daniel Henrique Barboza)
 * [197c927] SR-IOV for mlx5 interfaces: docs/api.md and i18n changes                       (Daniel Henrique Barboza)
 * [9399aa4] Adding 'module' into interfaces API: test changes                              (Daniel Henrique Barboza)
 * [036a8fe] Adding 'module' into interfaces API: model changes                             (Daniel Henrique Barboza)
 * [739834e] Adding 'module' into interfaces API: sysmodule changes                         (Daniel Henrique Barboza)
 * [f71b016] Adding 'module' into interfaces API: docs and control changes                  (Daniel Henrique Barboza)
 * [885ad6e] Github #260: packaging changes and wok version restiction                      (Daniel Henrique Barboza)
 * [b04ea6e] ChangeLog for 2.1.0 release                                                    (Daniel Henrique Barboza)
 * [79b48f8] po files update prior to 2.1 release                                           (Daniel Henrique Barboza)
 * [ab717b7] Fixing i18n.py and ui/pages/i18n.json.tmpl messages                            (Daniel Henrique Barboza)
 * [130e5c2] Fixed Issue #233 error message appears in closeable format                     (Rajat Gupta)
 * [2582b41] Issue # 230 and #231.                                                          (Megha Smriti)
 * [c09657e] Issue # 232 : In Storage tab the bottom lines are miss-aligned on each secti.. (Atreyee Mukhopadhyay)
 * [53575df] Fixed issues in VLAN and BOND creation                                         (Jayavardhan Katta)
 * [2b875a6] Fix for issue #215                                                             (Suresh Babu Angadi)
 * [ca9f1d8] Issue #102 Create partition fails with 500                                     (Harshal Patil)
 * [200898e] Issue #133 Delete physical volume fails with 500 status code                   (Pooja Kulkarni)
 * [618f7c1] Ginger Issue #113: Delete operation for /dasdpartitions fails with 500         (Pawan Kumar)
 * [539092c] Issue #140 : Create swap file fails                                            (Harshal Patil)
 * [fc38b7d] Improve user request log messages                                              (Lucio Correia)
 * [2ceb7b2] OVS backend: Avoid error message in WoK start                                  (Daniel Henrique Barboza)
 * [4bd5862] Issue #223: list isn't refreshing after unload                                 (Samuel Guimarães)
 * [873dec7] Issue #225 Storage devices listing API timesout if large number of FC device.. (Pooja Kulkarni)
 * [bd4ef81] Fix Ginger UI: SEP container is hidden after start service                     (Rodrigo Trujillo)
 * [cdd9b9e] Updated Ginger SCSS to import new Wok accordion mixin                          (Samuel Guimarães)
 * [18b4c61] OVS bridges backend: new tests file test_ovsbridges.py                         (Daniel Henrique Barboza)
 * [9b2ccf0] OVS bridges backend: new model/ovsbridges.py module                            (Daniel Henrique Barboza)
 * [1786406] OVS bridges backend: changes in controls, ginger.py and model/model.py         (Daniel Henrique Barboza)
 * [c628f04] OVS bridges backend: docs/API.md and i18n.py changes                           (Daniel Henrique Barboza)
 * [a66167d] Customize user request log messages                                            (Lucio Correia)
 * [476afc0] Adding svg files to ginger spec file                                           (Daniel Henrique Barboza)
 * [2b20636] Adding svg pictures to IBM blacklist                                           (Daniel Henrique Barboza)
 * [6a7cb11] Added Ginger new SVG logo for login page, footer and about window              (Samuel Guimarães)
 * [5d2f4cc] Github #224: adding all JS files in ui/js/Makefile.am                          (Daniel Henrique Barboza)
 * [f8c6071] Removing rstrip() calls just after strip()                                     (Daniel Henrique Barboza)
 * [5ce7c92] Fix PEP8 issues according to 1.5.7 version                                     (Aline Manera)
 * [a9bb201] Update pkg-version script to work with submodules                              (Aline Manera)
 * [0b6ddd2] Expose Ginger version on /config URI                                           (Aline Manera)
 * [a7e9aec] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [580cca5] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [26b1534] Multiple UI Fixes                                                              (Chandra Shekhar Reddy)
 * [290e46c] Multiple UI Fixes                                                              (Jan Schneider)
 * [83779b9] Multiple UI Fixes                                                              (Suresh Babu Angadi)
 * [a67cccb] Multiple UI Fixes                                                              (Suresh Babu Angadi)
 * [ccefa8f] Multiple UI Fixes                                                              (Rajat Gupta)
 * [191602e] Multiple UI Fixes                                                              (Rajat Gupta)
 * [6144b1f] Multiple UI Fixes                                                              (Rajat Gupta)
 * [d629442] Copyright fixes for sysmodules UI files                                        (Daniel Henrique Barboza)
 * [9588c87] Sysmodules modal window and form validation v3                                 (Samuel Guimarães)
 * [f8b4ed7] Sysmodules (SR-IOV) details accordion v3                                       (Samuel Guimarães)
 * [755179c] Sysmodules (SRIOV) tab initial implementation v2                               (Andre Teodoro)
 * [45c29be] Implement locking for network functions                                        (Jayavardhan Katta)
 * [ce99c8c] Changes for ginger to fix the Issue# 28 in Wok.                                (Atreyee Mukhopadhyay)
 * [95e62d8] Add missing license header                                                     (Aline Manera)
 * [d1d7209] Use check-IBM-license-header.sh from Wok                                       (Aline Manera)
 * [bfb75ed] Fix PEP8 according to PEP8 1.5.7 version                                       (Aline Manera)
 * [9f8b9b9] Issue #217 Storage devices listing API timesout if large number of DASD devi.. (Pooja Kulkarni)
 * [3455e0e] Ginger Issue #216:Inconsistency in display of DASD and FCLUNS size.            (Pawan Kumar)
 * [69ec91b] Issue #209 GUI shows wrong units for swap devices                              (Harshal Patil)
 * [58e46ca] Issue #210 Multipath friendly names not showing correct number of paths        (Pooja Kulkarni)
 * [549aa2e] Issue #205 List storage device fails when FC devices are removed in multithr.. (Pooja Kulkarni)
 * [1100f06] Adjustments after issue #202 fix                                               (Daniel Henrique Barboza)
 * [b16b6cf] Wok failed to start due Ginger dependency on libvirt                           (Chandra Shekhar Reddy Potula)
 * [b638fb1] Help page content update to reflect the current UI pages                       (Chandra Shekhar Reddy Potula)
 * [465dc9a] Fix ginger issues as #67 #71 #139 #141 #163                                    (Megha Smriti)
 * [e68c0a0] Fix for issue #199                                                             (Suresh Babu Angadi)
 * [bc55068] Fix for issue #198                                                             (Suresh Babu Angadi)
 * [817a95c] vlan UI html changes to relax interface naming convention                      (Chandra Shekhar Reddy Potula)
 * [ce0bd02] vlan UI js changes to relax interface naming convention                        (Chandra Shekhar Reddy Potula)
 * [ab92d8b] Fixing vlan and bond issues in cfginterfaces                                   (Jayavardhan Katta)
 * [02272a8] IBM copyright changes across the board                                         (Daniel Henrique Barboza)
 * [20d4da8] Adding IBM license verification in check-local                                 (Daniel Henrique Barboza)
 * [07118b2] Address-List-Issues-In-Interface                                               (abhiramk)
 * [57287cb] test_physicalvol: fixing error messages match                                  (Daniel Henrique Barboza)
 * [f1d9245] Fix PEP8 issues according to PEP8 1.5.7 version                                (Aline Manera)
 * [515dd06] Require authentication to APIs which provide detailed system information       (Aline Manera)
 * [907eeb3] Add authorization tests to confirm Ginger continues working as expected with.. (Aline Manera)
 * [55e7ee1] Use UrlSubNode to enable resource authentication                               (Aline Manera)
 * [b27d560] Github #193: Modified the ipv4 and ipv6 code to accept valid values            (Megha Smriti)
 * [58470e6] Issue #161: Storage device listing buttons are always enabled                  (Jan Schneider)
 * [cbeb7e9] sysmodules backend: adding 'mlx4_core' alias                                   (Daniel Henrique Barboza)
 * [8851ca6] Makefile.am targets enhancements                                               (Daniel Henrique Barboza)
 * [d9a643b] Fix Issue #192                                                                 (Rajat Gupta)
 * [599a5e1] Updated API.md file to update the doc for the information for the URI /plugi.. (Megha Smriti)
 * [8ae7952] Unit tests: changing 'models' to 'model'                                       (Daniel Henrique Barboza)
 * [9c5ad57] Renaming 'models' to 'model': changes in Makefiles                             (Daniel Henrique Barboza)
 * [f96561a] Renaming 'models' directory to 'model'                                         (Daniel Henrique Barboza)
 * [2095409] Changes in RPM spec:                                                           (Daniel Henrique Barboza)
 * [9a2e3aa] Rename 'controls' to 'control' in Ginger files                                 (Daniel Henrique Barboza)
 * [8fde01e] Rename 'controls' dir to 'control'                                             (Daniel Henrique Barboza)
 * [529ac7a] Fix ginger issue #191. Clean routes.                                           (abhiramk)
 * [aff9ed2] Revert "Adding sub_nodes to __init__.py"                                       (Daniel Henrique Barboza)
 * [f4ebbc2] Fix ginger issue #108                                                          (abhiramk)
 * [cd36819] UI page new look for global network configuration                              (Chandra Shekhar Reddy Potula)
 * [9a2280f] Javascipt changes to global network configuration                              (Chandra Shekhar Reddy Potula)
 * [b582bd2] CSS code changes to global network configuration                               (Chandra Shekhar Reddy Potula)
 * [497352e] Code changes to global network configuration back end                          (Chandra Shekhar Reddy Potula)
 * [a85e2f6] Issue #162: Format DASD UI messages are corrected                              (Rajat Gupta)
 * [0c0c1d7] Issue #188: DASD format/remove fails with no reason specified.                 (Pawan Kumar)
 * [4c0b928] tests/test_partitions: test failing when real sdb1 mounted                     (Daniel Henrique Barboza)
 * [6c47159] Update API.md for interface API. Issue #69                                     (abhiramk)
 * [44b22d2] Fix bond and vlan creation issue                                               (abhiramk)
 * [80227f9] Fixing tests/test_cfginterfaces                                                (Daniel Henrique Barboza)
 * [3ac39d3] This patch addresses ginger issues #109 , #110 , #124, #126                    (Abhiram Kulkarni)
 * [15a70c8] Adding sub_nodes to __init__.py                                                (Daniel Henrique Barboza)
 * [59eda64] Update Ginger configuration according to recent changes on Wok                 (Aline Manera)
 * [4123f0e] Fix for ginger issue #70 with double quotes.                                   (Megha Smriti)
 * [06200b3] Bug fixing in the Network page (#159 and #179)                                 (Chandra Shekhar Reddy Potula)
 * [6b1267f] Fix for issue #180                                                             (Suresh Babu Angadi)
 * [ed6b494] Issue #23 : SAN Adapters Listing is not proper on UI                           (Harshal Patil)
 * [cfb2191] Fixes for modal network bond page                                              (Chandra Shekhar Reddy Potula)
 * [2a7120e] Fixes for modal network settings page                                          (Chandra Shekhar Reddy Potula)
 * [e8b0f42] Fixes for modal network vlan page                                              (Chandra Shekhar Reddy Potula)
 * [e2ce2e2] Fix Firmware Update arguments parsing.                                         (Paulo Vital)
 * [b579d7e] fix for Issue# 143                                                             (Rajat Gupta)
 * [ccb158d] Fixing test_firmwareprogress and copyrights                                    (Daniel Henrique Barboza)
 * [1087fc0] Update test_firmware.                                                          (Paulo Vital)
 * [11e37cd] Change Firmware Update command from PUT to POST                                (Paulo Vital)
 * [7cba67d] Fix serviceable package name                                                   (Jose Ricardo Ziviani)
 * [bb15e99] Fix for issue #169 in ginger plugin                                            (Megha Smriti)
 * [abd6652] Issue #185 VLAN interface UI issues                                            (Chandra Shekhar Reddy Potula)
 * [eb0ac3f] Fix ginger issue #144                                                          (abhiramk)
 * [f8dcc02] Issue #177 Incorrect multipath count for DASD devices                          (Harshal Patil)
 * [4556314] test_dasdpartitions: fixing import                                             (Daniel Henrique Barboza)
 * [c653c0d] Issue #101 GET /plugins/ginger/dasdpartitions/dasdi fails with 500             (Pooja Kulkarni)
 * [b88d114] Issue #164 Missing "device_name" in /filesystems                               (Pooja Kulkarni)
 * [6ec3963] Issue #178 Removing UUID from the tape device information affects the FCP ta.. (Pooja Kulkarni)
 * [2fb10e3] Fix error in wok_log.error() in models/users.py                                (Daniel Henrique Barboza)
 * [578cf61] Fixing i18n message of sysmodules                                              (Daniel Henrique Barboza)
 * [ab131f1] Issue #22 & #24 in ginger390x                                                  (Suresh Babu Angadi)
 * [3d629df] General unit test fixes in test_swap and test_firmwareprogress                 (Daniel Henrique Barboza)
 * [48dc3ed] Issue #171: NW UI: subchannels is not getting displayed in network setting p.. (Archana Singh)
 * [293b2df] Fixing issues with ginger - #82                                                (Jayavardhan Katta)
 * [415d60a] Prevent AsyncTask timeout error during FW Update.                              (Paulo Vital)
 * [c76f966] I18n changes and input field validation for bond                               (Atreyee Mukhopadhyay)
 * [5acd837] Issue# 157 : Hide settings, vlan and bond options on Ubuntu and SuSe           (Atreyee Mukhopadhyay)
 * [d43447e] Github #170: availability check of dasddevs API                                (Daniel Henrique Barboza)
 * [5401322] tests/test_sysmodules.py: additional tests                                     (Daniel Henrique Barboza)
 * [790da40] Github #137: model and API changes for sysmodule features                      (Daniel Henrique Barboza)
 * [0e6280a] Add FirmwareProgress UI                                                        (Paulo Vital)
 * [2f8f832] Github #168: wrong error code in lookup()                                      (Daniel Henrique Barboza)
 * [c0413ab] Fixing models.utils._pvdisplay_out() error codes                               (Daniel Henrique Barboza)
 * [b5b584b] Unit test changes for tests/test_physical_vol.py                               (Daniel Henrique Barboza)
 * [cbb2b2e] Github #133: fix status code and error message of remove_pv                    (Daniel Henrique Barboza)
 * [ab19f91] Issue #146 #147 #149 #151: configuration backup issues                         (Jose Ricardo Ziviani)
 * [48624eb] Issue #150: configuration backup records on click open and close multiple ti.. (Jose Ricardo Ziviani)
 * [86f2bc7] Issue #148: New Custom Backup allows blank data                                (Jose Ricardo Ziviani)
 * [bbc2c99] GET of interfaces to include inactibe Bond and Vlan interfaces                 (abhiramk)
 * [16bd192] Html page for Network UI VLAN page                                             (Chandra Shekhar Reddy Potula)
 * [75f8616] JS file changes for Networking UI VLAN page                                    (Chandra Shekhar Reddy Potula)
 * [9410d16] Html file changes for Network UI Bond page                                     (Atreyee Mukhopadhyay)
 * [abb244a] JS file changes for Network Bond UI page                                       (Atreyee Mukhopadhyay)
 * [bfb2e56] CSS changes for Network UI Bond page                                           (Atreyee Mukhopadhyay)
 * [4a78da4] makefile changes for network settings UI.                                      (Archana Singh)
 * [43b5450] i18n for network settings UI.                                                  (Archana Singh)
 * [3458198] html for network setting UI.                                                   (Archana Singh)
 * [b01365d] JS for network settings UI.                                                    (Archana Singh)
 * [37dd8aa] CSS for network settings UI.                                                   (Archana Singh)
 * [f6638f0] Fix for ginger issue #131                                                      (abhiramk)
 * [2322770] Fixing id of device element in ui/js/host-network.js                           (Daniel Henrique Barboza)
 * [3bbc785] Update API.md with user management information                                 (Jose Ricardo Ziviani)
 * [a60f426] Github #135: test cases in tests/test_swap.py                                  (Daniel Henrique Barboza)
 * [b9b61df] Github #135: Swap API return codes                                             (Daniel Henrique Barboza)
 * [9b77292] Fix ginger issues #42 , #109 , #110 , #111 and #112                            (abhiramk)
 * [686cecc] Fixing ginger issues #105 , #106 and #114                                      (Jayavardhan Katta)
 * [46ca1a3] Help page for storage tab for Ginger                                           (Chandra Shekhar Reddy Potula)
 * [8958a4e] Issue #115 : Few Links to the pages are missing under Storage Devices          (Chandra Shekhar Reddy Potula)
 * [86dd259] Issue #134: Missing group name lead to general error in ginger                 (Jose Ricardo Ziviani)
 * [e7da160] Adding CfginterfacesModel to the Capabilities API                              (Daniel Henrique Barboza)
 * [f0049d8] tests/test_ibmsep.py - Unit tests for IBM Sep models                           (Daniel Henrique Barboza)
 * [dd6dedb] models/sensors.py: adding 'hddtemp' as a prerequirement                        (Daniel Henrique Barboza)
 * [9473e0d] Unit test for Sensors model                                                    (Daniel Henrique Barboza)
 * [00fab54] Issue #120: Change Power Management Options does not work on a Power System    (Jose Ricardo Ziviani)
 * [94136cf] Issue #122: Cannot add a new user using Ginger interface                       (Jose Ricardo Ziviani)
 * [c4f43e8] Issue #100 : failed to comply with json schema for dasd device                 (Harshal Patil)
 * [93bdad4] Issue #98 : GET /plugins/ginger/stgdevs fails with 500                         (Harshal Patil)
 * [38c98ab] Fix python-ethtool repository and typos                                        (Lucio Correia)
 * [888cadf] Unit tests for models/backup.py models                                         (Daniel Henrique Barboza)
 * [91230a2] Github #119: adding sysmodules files to Makefile.am                            (Daniel Henrique Barboza)
 * [ff2238d] Adding unit tests for Firmware model                                           (Daniel Henrique Barboza)
 * [d9dd4a8] Unit tests for the PowerManagement model                                       (Daniel Henrique Barboza)
 * [0976922] SysModules backend: unit tests                                                 (Daniel Henrique Barboza)
 * [0c366fd] SysModules backend: model classes                                              (Daniel Henrique Barboza)
 * [d4e6a16] SysModules backend: control classes                                            (Daniel Henrique Barboza)
 * [79231fa] SysModules backend: docs/API.md and i18n changes                               (Daniel Henrique Barboza)
 * [58eb94f] Makefile.am: adding AUTOMAKE_OPTIONS=foreign                                   (Daniel Henrique Barboza)
 * [4802889] Issue #87 : GET operation /plugin/ginger/dasddevs/<bus id> fails with 500 st.. (Harshal Patil)
 * [b129721] Issue #90: GET on /plugins/ginger/filesystems/<mount point> fails with 500     (Ramon Medeiros)
 * [706f9e7] Update README.md                                                               (Paulo Vital)
 * [033077e] Moved README to docs dir and make it MK supported.                             (Paulo Vital)
 * [e0c20f5] Github issue #99                                                               (abhiramk)
 * [3ab2b94] Update README                                                                  (Lucio Correia)
 * [854ad28] ginger.spec.in: adding files using wildcard                                    (Daniel Henrique Barboza)
 * [bb1254d] Add FirmwareProgress unit test.                                                (Paulo Vital)
 * [2951678] Add FirmwareProgress classes.                                                  (Paulo Vital)
 * [9f951d3] Change to update firmware as AsyncTask.                                        (Paulo Vital)
 * [4c091c1] Fixing issues with cfginterfaces - #77 and #78                                 (Jayavardhan Katta)
 * [bbd4a37] Updating ginger.css                                                            (Daniel Henrique Barboza)
 * [dc60b46] Storage tab Implementation for Ginger plugin.                                  (Atreyee Mukhopadhyay)
 * [cd3b1e2] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [e5f1efe] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [e13565b] Storage tab Implemention for Ginger plugin.                                    (Atreyee Mukhopadhyay)
 * [d37d8fa] Do not rely on python-pip to install build dependencies                        (Aline Manera)
 * [3872548] Keep one single CSS file per application                                       (Aline Manera)
 * [6c3b543] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [9223e41] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [188ce35] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [f3e95b2] Network tab page for plugin ginger.                                            (Chandra Shekhar Reddy Potula)
 * [7efe387] test_filesystems: using -F (force) option in create_file                       (Daniel Henrique Barboza)
 * [dd2ec19] Issue 88 : Missing unformatted DASD devices from storage API                   (Harshal Patil)
 * [3199b55] Issue #81: Failed to format a device/partition with type 'xfs'                 (Pooja Kulkarni)
 * [b738301] Updated ChangeLog for 2.0.0                                                    (Daniel Henrique Barboza)
 * [ee1f8cb] Issue 84: User Management UI issues                                            (samhenri)
 * [7c3938b] Fixed error messages not showing in Ginger                                     (samhenri)
 * [8bf94d7] Fixes after the CSS and media query commits                                    (Daniel Henrique Barboza)
 * [15eef0e] Adding Media Query support for Ginger                                          (samhenri)
 * [0cb33ae] Fixed minor CSS issues with Ginger                                             (samhenri)
 * [6f9ece8] Wraping things up for 2.0.0 release                                            (Daniel Henrique Barboza)
 * [58728b9] Issue 72 : listing of storage devices has missing parameters to remove the d.. (Harshal Patil)
 * [bab5ea8] Implementing common functionalities related to jquery bootgrid                 (Atreyee Mukhopadhyay)
 * [7fec65f] Fixing rpm generation after CSS changes                                        (Daniel Henrique Barboza)
 * [c57e033] Use correct gettext package for building                                       (Lucio Correia)
 * [ad27b40] Fixing issues with cfginterfaces                                               (Jayavardhan Katta)
 * [85d1933] Remove special character from host-admin.js to it be interpreted as ASCII Text (Aline Manera)
 * [cb73b40] Issue #53:Introduced macaddr and derive status value from operstate            (Jayavardhan Katta)
 * [c04a068] Issue #76 : Failed to create swap device using multipath and whole devices     (Pooja Kulkarni)
 * [9d23060] Fixed SCSS Makefile                                                            (samhenri)
 * [8bbb8cc] Adding Admin New Custom Backup history                                         (Andre Teodoro)
 * [94d0487] Upgrade Ginger objectstore schema.                                             (Paulo Vital)
 * [b485b2b] Use always flag as a fallback                                                  (Lucio Correia)
 * [de193ed] Issue #63 : Failed to create physical volumes using whole devices rather tha.. (Pooja Kulkarni)
 * [489856a] Issue #61: multipath device with filesystem issue                              (Pooja Kulkarni)
 * [8dbdf23] Fix DEB dependencies                                                           (Lucio Correia)
 * [d12d5fb] Fix issue #22 - Add workaround for libuser bug                                 (Lucio Correia)
 * [ce29993] Fixing unit tests after lsblk changes                                          (Daniel Henrique Barboza)
 * [f7f1e3a] Fixing broken packaging due to wrong variable                                  (Daniel Henrique Barboza)
 * [a145e82] Expose HTML tabs files in a specific /tabs URI                                 (Aline Manera)
 * [81e7009] Issue #57: Incorrect multipath device name being returned by list storage de.. (Pooja Kulkarni)
 * [6bfe40a] Make Ginger RPM noarch                                                         (Lucio Correia)
 * [b2f562f] Issue #56 : Rest API for storage devices fails on Ubuntu 14.04                 (Harshal Patil)
 * [6c6c4ef] Do not expose /images URI                                                      (Aline Manera)
 * [60a0e9f] Applying new ui to Admin New Custom Backup                                     (Andre Teodoro)
 * [ff08fc5] Issue #35                                                                      (Jayavardhan Katta)
 * [7771909] Github #48 and #50: unit tests changes                                         (Daniel Henrique Barboza)
 * [8d8e225] Adding data subdir to gitignore                                                (Daniel Henrique Barboza)
 * [bb6ac98] Github #22: adding workaround for libuser in README                            (Daniel Henrique Barboza)
 * [d1ca6e4] Issue 38 : Missing package dependencies in spec files                          (Chandra Shekhar Reddy Potula)
 * [fda7c49] Fixing minor issues at Admin Backup Batch Delete Modal                         (Andre Teodoro)
 * [5ccb24d] Applying new ui at Admin Backup Batch Delete Modal                             (Andre Teodoro)
 * [a69f344] Applying new ui at Admin User Management Modal                                 (Andre Teodoro)
 * [0167eb2] Applying new-ui at SEP Configuration Modal                                     (Andre Teodoro)
 * [ce48f7c] Applying new-ui at SEP Configuration Panel                                     (Andre Teodoro)
 * [80d6811] Applying new ui at Administration tab                                          (Andre Teodoro)
 * [bcc5447] Applying new-ui at SAN Adapters Admin panel                                    (Andre Teodoro)
 * [a20f619] Changing Collapse from Admin Screen to Bootstrap Accodion                      (Andre Teodoro)
 * [12db7c0] ipv4 and ipv6 routes support                                                   (abhiramk)
 * [8e2ab6f] Delete operation on interface of types "Bond" and "Vlan"                       (Jayavardhan Katta)
 * [4a802fb3] Added SCSS assets                                                              (samhenri)
 * [f5559e7] Fixing unused messages in i18n.py and models/utils.py                          (Daniel Henrique Barboza)
 * [6a75337] Listing available storage devices                                              (Pooja Kulkarni)
 * [721e79e] Test Cases for storage devices API                                             (Pooja Kulkarni)
 * [c18c610] Updated API doc for storage devices                                            (Pooja Kulkarni)
 * [0c7eaa9] Missing files from previous merges                                             (Daniel Henrique Barboza)
 * [55c7467] Ginger Task API: unit tests changes                                            (Daniel Henrique Barboza)
 * [cbb44ef] Ginger Task API: model changes                                                 (Daniel Henrique Barboza)
 * [0b236e0] Ginger task API: docs/API.md changes                                           (Daniel Henrique Barboza)
 * [d0889c8] Test Cases for Logical Volume support in Ginger                                (Pooja Kulkarni)
 * [20f21cd] Updated API doc for Logical Volumes support in Ginger                          (Pooja Kulkarni)
 * [521f7d8] Support for list, create and delete operations on Logical Volumes on the host  (Pooja Kulkarni)
 * [68387e0] Test cases for volume groups support in Ginger                                 (Pooja Kulkarni)
 * [10efe2f] Updated API doc for volume group support                                       (Pooja Kulkarni)
 * [f4d3e53] Support for list, create, modify and delete volume groups on host              (Pooja Kulkarni)
 * [72a0929] Test Cases for physical volumes support in Ginger                              (Pooja Kulkarni)
 * [52f26c1] Updated API doc for physical volume support                                    (Pooja Kulkarni)
 * [b539d4b] Support for list, create and remove physical volumes on host                   (Pooja Kulkarni)
 * [c86b80d] Test cases for disk partition support                                          (Pooja Kulkarni)
 * [84a46d7] Updated API doc for disk partition support                                     (Pooja Kulkarni)
 * [a634c24] Support for list, create and delete disk partitions on host                    (Pooja Kulkarni)
 * [5998c30] Create an interface of type "Vlan"                                             (Jayavardhan Katta)
 * [a768c05] Support DASD (ECKD) devices : Test Cases                                       (Pawan Kumar)
 * [0bb1507] Support DASD (ECKD) devices : Docs and base files                              (Pawan Kumar)
 * [1b90db5] Support DASD (ECKD) devices : Model files                                      (Pawan Kumar)
 * [8b9e9c7] Support DASD (ECKD) devices : Control files                                    (Pawan Kumar)
 * [a25622f] make check-local whiteline fixes                                               (Daniel Henrique Barboza)
 * [9d96ff0] Github #44: make check-local improvements                                      (Daniel Henrique Barboza)
 * [64e63bf] Remove obsolete message GINSP00018E                                            (Aline Manera)
 * [a5e6809] Remove obsolete message GINNET0030E                                            (Aline Manera)
 * [989b8f9] Adjust Ginger for the new navigation bar                                       (Aline Manera)
 * [5ba6aa0] API doc for POST action on collection - "cfginterfaces"                        (Jayavardhan Katta)
 * [d69effa] Create interface of type "Bond"                                                (Jayavardhan Katta)
 * [648366e] For RFC editing the interface with ipv6 configuration(PUT operation continued) (abhiramk)
 * [a0cc2a3] Fix Firmware level information of BMC-based machines.                          (Paulo Vital)
 * [3116152] pep8 fix in tests/test_filesystems.py                                          (Daniel Henrique Barboza)
 * [bf23bbd] Added testcases for NFS mount operation.                                       (Pooja Kulkarni)
 * [4a0f7b1] Modify API documentation to support NFS mount operation.                       (Pooja Kulkarni)
 * [a26b6b7] Extend filesystem code to support NFS mount.                                   (Pooja Kulkarni)
 * [bb4b6b3] Updated API documentation for swap device support                              (Harshal Patil)
 * [20058da] Test cases for swap device management in Ginger                                (Harshal Patil)
 * [44506c4] List/add/remove the swap devices used by the host                              (Harshal Patil)
 * [a0e6de0] Support PUT operation to edit the interface cfg files.                         (abhiramk)
 * [fe5f67c] Implementation of POST actions activate/deactivate on interfaces.              (Jayavardhan Katta)
 * [5d305f1] Github #36: cleaning up python augeas object                                   (Daniel Henrique Barboza)
 * [e7b1199] Missing filesystem files                                                       (Daniel Henrique Barboza)
 * [eedd813] Test cases for filesystem support                                              (Pooja Kulkarni)
 * [6f83c4f] Updating API docs for filesystem support                                       (Pooja Kulkarni)
 * [148aed9] Adding filesystem list/mount/unmount support to Ginger                         (Pooja Kulkarni)
 * [4905c34] Listing the information from ifcfg files                                       (abhiramk)
 * [4ff1320] Fixing Ginger tests after WoK                                                  (Daniel Henrique Barboza)
 * [ecc57a9] Fix for the issue #26 https://github.com/kimchi-project/ginger/issues/26       (abhiramk)
 * [84f36db] Update UI string related to FW update files.                                   (Paulo Vital)
 * [59db493] Add support to update Power FW using not only RPM files.                       (Paulo Vital)
 * [0810eac] Show 'progress' image while sensor monitor data is being retrieved             (Socorro Stoppler)
 * [f4827d4] pep8 fixes for models/users.py                                                 (Daniel Henrique Barboza)
 * [fd4be1f] Adding static UI files path in ginger.conf                                     (Daniel Henrique Barboza)
 * [e94735c] Wok updates                                                                    (Pooja)
 * [b0cc0fa] Adapt Ginger to use Wok - Webserver Originated from Kimchi                     (Lucio Correia)
 * [43b09f5] Fix user/groups id creation in user management                                 (Rodrigo Trujillo)
 * [147258c] Fix password encryption and salt generation                                    (Rodrigo Trujillo)
 * [f6b32ff] Add missing translations                                                       (Aline Manera)
 * [112b75e] Update missing translations                                                    (Ramon Medeiros)
 * [091323a] Add User panel to show correcly in all languages                               (Socorro Stoppler)
 * [bbb7752] Update help pages for ja_JP and zh_CN                                          (Aline Manera)
 * [56e96fd] Fix comment format on i18n.json                                                (Ramon Medeiros)
 * [6ff9be4] User model changes                                                             (Daniel Henrique Barboza)
 * [6aa05a7] Unit tests for user management                                                 (Daniel Henrique Barboza)
 * [27029a1] Fixing russian translation file                                                (Daniel Henrique Barboza)
 * [8e8e9fc] New translation files for Ginger                                               (Daniel Henrique Barboza)
 * [e02aac6] Help changes for ginger                                                        (Kersten)
 * [818c53a] Adding copyright disclaimer to files that didn't have.                         (Daniel Henrique Barboza)
 * [a074444] Fix Power Management availability for new tuned-adm versions                   (joserz@linux.vnet.ibm.com)
 * [dc1e37d] TRANSLATION: Add new languages and rebuild existent                            (Rodrigo Trujillo)
 * [26cf416] Translation: Change process - sort output and avoid fuzzy msgs                 (rodrigo.trujillo@linux.vnet.ibm.com)
 * [86c1d14] Improve SEP UI - multi subscription (FRONT-END)                                (rodrigo.trujillo@linux.vnet.ibm.com)
 * [a13a944] Improve SEP API - multi subscription (API.json/i18n.py)                        (rodrigo.trujillo@linux.vnet.ibm.com)
 * [b48aef6] Improve SEP API - multi subscription (control/model)                           (Ramon Medeiros)
 * [ebe1ca2] Add ppc64le support to Firmware is_feature_available()                         (christy@linux.vnet.ibm.com)
 * [d8bf0f1] Remove Kimchi LibvirtConnection dependency from network.py                     (rodrigo.trujillo@linux.vnet.ibm.com)
 * [779385b] Remove Kimchi LibvirtConnection dependency from interfaces.py                  (rodrigo.trujillo@linux.vnet.ibm.com)
 * [0459d44] Add html files and build-aux/compile to .gitignore list                        (rodrigo.trujillo@linux.vnet.ibm.com)
 * [5b8a541] Updating .po files                                                             (Daniel Henrique Barboza)
 * [ed405be] Changing ChangeLog generation                                                  (Daniel Henrique Barboza)
 * [3e69117] Github #9, #10 and #12 fixes                                                   (Daniel Henrique Barboza)
 * [9a5567a] i18n.py: deleting the merge with kimchi messages                               (Daniel Henrique Barboza)
 * [a8a6514] Enhancing Power Management error messages                                      (Daniel Henrique Barboza)
 * [8c5ea3a] ChangeLog file for Ginger                                                      (Daniel Henrique Barboza)
 * [4c81977] Make check fixes                                                               (Daniel Henrique Barboza)
 * [0e4806c] Debian/Ubuntu packaging files                                                  (Daniel Henrique Barboza)
 * [23ded96] README: adding Ubuntu/Debian info.                                             (Daniel Henrique Barboza)
 * [f0c3be7] models/ibm_sep.py: adding 'is_feature_available()' method                      (Daniel Henrique Barboza)
 * [c332517] models/interfaces.py: fixing an 'is not defined' error                         (Daniel Henrique Barboza)
 * [fd5c176] UI: Capabilities for ginger                                                    (wenwang@linux.vnet.ibm.com)
 * [b60e80a] Capabilities API: adding support to some existing models                       (Daniel Henrique Barboza)
 * [b911174] Adding capabilities API to Makefiles                                           (Daniel Henrique Barboza)
 * [6441dbf] Adding new API: Capabilities                                                   (Daniel Henrique Barboza)
 * [8aa841f] Fix delete user return error                                                   (Rodrigo Trujillo)
 * [e8453fc] Have Firmware inherit from Object                                              (christy@linux.vnet.ibm.com)
 * [b7589c6] Changing the network interfaces listing                                        (Daniel Henrique Barboza)
 * [a7f2e08] UI: Ginger User Management                                                     (Wen Wang)
 * [b76a7e2] models/interfaces.py: removing ip/netmask on blank input                       (danielhb@linux.vnet.ibm.com)
 * [1e1011f] Add Ginger Help files                                                          (Rodrigo Trujillo)
 * [a8bff3e] Packaging: Let Ginger Depend on Latest Kimchi                                  (Zhou Zheng Sheng)
 * [3345353] Deal with bad hdd sensor data                                                  (christy@linux.vnet.ibm.com)
 * [6eb90a5] Bugfix: Make buttons display properly when the text is long                    (Wen Wang)
 * [e7ed072] Enhancement: Change the SEP status style from text to a status dot             (Wen Wang)
 * [468149e] host-admin.js: disabling OK button when processing                             (danielhb@linux.vnet.ibm.com)
 * [daecbfc] Update Makefile.am to add autogen.sh in tarball.                               (Paulo Vital)
 * [3cc5181] Add timeout check for configuration backup                                     (Zhou Zheng Sheng)
 * [9a3b682] Bugfix Takes time to activate tuned profile in "Power Options"                 (Wen Wang)
 * [db95b9e] IBM SEP bug fix: Update _get_subscribe info                                    (Paulo Vital)
 * [eac260e] Bugfix: Change ginger's text for translation                                   (wenwang@linux.vnet.ibm.com)
 * [1e1905b] UI: SEP(ESA) initial setup                                                     (Wen Wang)
 * [b6f83bc] IBM Serviceable Event Provider (SEP): Update build files                       (Paulo Vital)
 * [c5869b6] IBM Serviceable Event Provider (SEP): Backend support                          (Paulo Vital)
 * [66db9fd] IBM Serviceable Event Provider (SEP): Update configuration files               (Paulo Vital)
 * [646a0c1] UI: Host sensors data visualization                                            (Wen Wang)
 * [ea67e95] 'tuned' troubleshot information in README file                                 (danielhb@linux.vnet.ibm.com)
 * [91ebfc3] Add sensors backend functionality                                              (christy@linux.vnet.ibm.com)
 * [9e5dccc] Fix pyflakes and pep 8 errors                                                  (Zhou Zheng Sheng)
 * [4fac9cc] Updated .gitignore to Address Generated Files                                  (hlwang@linux.vnet.ibm.com)
 * [5ce4a73] Adapt to new Kimchi authorization scheme                                       (Zhou Zheng Sheng)
 * [77a3b53] Removed all author references from Ginger files.                               (Paulo Vital)
 * [f19cf68] Changed the year of all IBM copyright mention to 2014.                         (Paulo Vital)
 * [28450db] Change project name in all files from Kimchi-ginger to Ginger.                 (Paulo Vital)
 * [a2ca125] Change build dependencies versions to support RHEL 6.X                         (Paulo Vital)
 * [70f03d2] i18n: GINNET0009E needs "err" key                                              (Zhou Zheng Sheng)
 * [0054436] Add pt_BR and zh_CN translations                                               (Zhou Zheng Sheng)
 * [ce61b51] Add Ginger i18n translation templates                                          (Zhou Zheng Sheng)
 * [f951825] Adapt to new Kinger front-end i18n mechanism                                   (Zhou Zheng Sheng)
 * [d669991] Kimchi-ginger: Declaration of Independence                                     (Zhou Zheng Sheng)
 * [5a7baae] Kimchi-Ginger i18n support: added support and marked strings to translation.   (Paulo Vital)
 * [cba117b] Add FW commit and reject capability.                                           (Christy Perez)
 * [19d013e] UI: Rename kimchi.template to kimchi.substitute                                (Zhou Zheng Sheng)
 * [99ebf08] UI: List SAN Adapters                                                          (Yu Xin Huo)
 * [82f4432] Add /var/spool/cron to default host configuration backup paths                 (Zhou Zheng Sheng)
 * [cd0bdc9] Packaging: ship with models/sandapters.py                                      (Zhou Zheng Sheng)
 * [4a3e80b] Power Profile Management - Front-end implementation                            (Yu Xin Huo)
 * [e9c3860] Only expose bare nics for configuration editing                                (Mark Wu)
 * [98db648] network configuration, interface, dns, gateway                                 (Yu Xin Huo)
 * [5c45243] Change default gateway update API                                              (Mark Wu)
 * [7d72d27] Backup Buttons Overlap when Labels are long                                    (Yu Xin Huo)
 * [93dae50] Creates Ginger API documentation file                                          (Rodrigo Trujillo)
 * [a4f2304] SAN adapters information                                                       (Rodrigo Trujillo)
 * [5656ca5] Host Backup: Sort the archive list returned to the front-end                   (Zhou Zheng Sheng)
 * [5ed91fc] Change labels for batch delete options of host config backup.                  (Paulo Vital)
 * [d87de90] Fix pep8 style issue in firmware.py                                            (Mark Wu)
 * [475c722] Host Backup: Make Include and Exclude Paths Configurable                       (Zhou Zheng Sheng)
 * [cc4a3f8] Turn Off Caching of Dynamic Generated Contents                                 (Zhou Zheng Sheng)
 * [c26b0a0] Host Backup: Refine Include and Exclude Rules                                  (Zhou Zheng Sheng)
 * [f809f1f] Rework error messages reported when updating the Power FW.                     (Christy Perez)
 * [a1f74d2] Enable Kimchi authentication on ginger URI                                     (Mark Wu)
 * [eb98f8a] host backup download: Use serve_file instead of internal redirect              (Zhou Zheng Sheng)
 * [4fb60ae] Packaging: Add Makefile.am and RPM spec entries for Ginger UI files            (Zhou Zheng Sheng)
 * [0d14203] Host Configuration Backup UI                                                   (Yu Xin Huo)
 * [7805a8a] Firmware Update UI                                                             (Yu Xin Huo)
 * [180396b] Improve host configuration backup back-end implementation                      (Zhou Zheng Sheng)
 * [e86bd3a] Fix the firmware image file name.                                              (Christy Perez)
 * [7d889bf] Host Configuration Backup Back-end Implmentation                               (Zhou Zheng Sheng)
 * [b6b6e04] Adding the backend firmware-update functionality.                              (Christy Perez)
 * [4b3195e] Make ginger root app inherit from kimchi Root class                            (Mark Wu)
 * [2e382c5] RootModel: replace RootModel with kimchi.basemodel.BaseModel                   (Zhou Zheng Sheng)
 * [582742b] Users Management: Add support to profile and i18n translation                  (Rodrigo Trujillo)
 * [321e5f5] Automatic rollback network configuration on failure                            (Zhou Zheng Sheng)
 * [44202ea] Update host network interface configuration                                    (Mark Wu)
 * [04e10b5] packaging: fix ginger plugin installing path                                   (Zhou Zheng Sheng)
 * [9d7f45d] Power management backend: fixing 'no active profile' condition                 (Daniel Henrique Barboza)
 * [58ad969] Adapt to the change of kimchi exception refactoring                            (Mark Wu)
 * [872ab3c] Add path vars for ginger plugin                                                (Mark Wu)
 * [4887cc1] Ginger users basic management back-end                                         (Rodrigo Trujillo)
 * [07f7163] PowerManagement backend: changes in common ginger files                        (Daniel Henrique Barboza)
 * [aae0a9c] PowerManagement backend: controller, model and API changes                     (Daniel Henrique Barboza)
 * [64936c6] Ginger plugin structure files                                                  (Rodrigo Trujillo)
