Metadata-Version: 2.1
Name: peekpoke
Version: 0.6.3
Summary: Remote hub memory tool for the Propeller microcontroller.
Home-page: http://siedell.com/projects/PeekPoke
Author: Chris Siedell
Author-email: chris@siedell.com
License: MIT
Project-URL: Python Documentation, https://github.com/chris-siedell/PeekPoke/wiki/PeekPoke-Python-Documentation
Project-URL: Spin Documentation, https://github.com/chris-siedell/PeekPoke/wiki/PeekPoke-Spin-Documentation
Project-URL: Source, https://github.com/chris-siedell/PeekPoke
Project-URL: Homepage, http://siedell.com/projects/PeekPoke
Description: # PeekPoke
        Status: _experimental_
        
        PeekPoke is a tool for reading and writing a Propeller's hub memory from a PC. It consists of two parts: a Python module for sending commands from the PC, and a Propeller program for responding to commands.
        
        The Python module has methods to read and write hub memory as bytes, strings, integers, and lists of integers.
        
        The Propeller program can be configured to restrict reads and writes to specific ranges, or to disable writes altogether.
        
        PeekPoke has these additional features:
        - the PAR register may be used to pass a value to the PC,
        - the PC can set the baudrate remotely,
        - the PC can reset the baudrate with a break condition,
        - the Propeller can support baudrates as fast as 26 clocks per bit period,
        - there is a four-byte `identifier` constant that can read by the PC,
        - a four-byte `token` variable is 0 on launch and can be set by the PC,
        - the PC can send PASM code to be executed (disabled by default),
        - the Propeller program is completely cog-contained after launch.
        
        ## Installation
        
        PeekPoke requires Python 3. It can be installed with the command `pip install peekpoke`, or the package may be downloaded from <https://pypi.org/project/peekpoke/>.  PeekPoke also requires the <https://pypi.org/project/crow-serial/> and <https://pypi.org/project/pyserial/> packages (pip automatically handles these dependencies).
        
        To run PeekPoke on the Propeller include `PeekPoke.spin`  in your project, and use the Spin methods to set up and launch a PeekPoke instance. The latest version of `PeekPoke.spin` can be found at <https://github.com/chris-siedell/PeekPoke>.
        
        ## Documentation
        
        Python: https://github.com/chris-siedell/PeekPoke/wiki/PeekPoke-Python-Documentation
        
        Spin: https://github.com/chris-siedell/PeekPoke/wiki/PeekPoke-Spin-Documentation
        
        
        
Keywords: Parallax Propeller P8X32A
Platform: UNKNOWN
Classifier: Development Status :: 3 - Alpha
Classifier: License :: OSI Approved :: MIT License
Classifier: Programming Language :: Python :: 3
Requires-Python: >=3
Description-Content-Type: text/markdown
